Thermacut Middle East

🔥 Did you know that the EX-TRACK®PA-1 manual pipe cutter does not need an electrical connection? This means it can be used anywhere on construction site even without access to electricity. Use it with propane as the fuel gas.

More information about the pipe cutter EX-TRACK®PA-1 is available at
https://eu1.hubs.ly/H070sJt0

JUST MOUNT IT AND CUT PIPES.

Do you know what the EX-TRACK® PA-1 is? It is a portable cutting system designed for cutting mild steel tubes using an oxyfuel cutting torch. 🔥 With this device you can cut pipes up to 600 mm diameters (with the supplied chain) and up to 90 mm wall thickness. The entire cutting process is manually controlled by an operator. No electricity needed. 😊

https://eu1.hubs.ly/H070tvk0

JUST MOUNT IT AND CUT PIPES.

🔥 Meet the EX-TRACK® PA-1 – pipe cutter! The EX-TRACK® PA-1 is a portable small cutting system designed for cutting mild steel tubes using an oxy-fuel cutting torch.

More information available at https://eu1.hubs.ly/H070sXl0, in the EX-TRACK® section.

How do you change OEM parts for Thermacut® replacement parts? Very easily! Watch the video below. This is Thermacut's solution suitable for the Hypertherm® HPR130XD®. 👍

With Thermacut® replacement parts, you can safely replace OEM consumables. They are reliable, affordable, and deliver superior cutting results. Verified by customers.
https://eu1.hubs.ly/H07jMyb0

Thermacut® is no way affiliated with Hypertherm®.

👉 👉 Did you know that there are more ways of connecting consumables than using a threaded fitting? THERMACUT® replacement nozzles for GCE® model ASF and PSF have a SPECIAL BAYONET QUICK CONNECTING SYSTEM. It allows you to attach and detach them without using a threaded fitting. These consumables are compatible with and suitable for GCE® torch FIT+®. 😉

Download your oxy-fuel catalogue at https://eu1.hubs.ly/H070sJ00 and contact your local THERMACUT® office.

THERMACUT® is no way affiliated with GCE®

🔥 🔥 EX-TRAFIRE®65HD . Small cuts are quick and easy to achieve, but if you want to work efficiently when producing longer cuts and completing larger cutting jobs, you need a cutting system with a high duty cycle. With its impressive duty cycle of 100 % at a cutting current of 65 A, the EX-TRAFIRE®65HD is ready to master every challenge. 😉

The new EX-TRAFIRE®65HD plasma cutting system is the perfect solution for a multitude of applications on construction sites. This compact device is suitable for a variety of purposes and ideal for cutting special parts and carrying out repair work on construction sites.

Available now! https://eu1.hubs.ly/H070sFg0
INDUSTRIAL CUTTING. HEAVY-DUTY PERFORMANCE.

🔥 🔥 Check out our video shot at a customer site showing EX-TRAFLAME® torches running simultaneously!

You'll get such perfect cutting results because of:
✔️ Precise gas pressure setting with 2 separate gas pressure gauges
✔️ Precise flame adjustment
✔️ Extended consumable life
✔️ Faster cutting speed and reduced preheating time

This oxy-fuel cutting torch is suitable for the EX-TRACK®CNC cutting system.
https://eu1.hubs.ly/H070sHY0

🔥 🔥 Do you need a compact, lightweight and versatile plasma cutter that offers top performance at all times? The new portable EX-TRAFIRE®45HD plasma cutting system is a robust, extremely powerful and cost-effective starter model for a multitude of applications. EX-TRAFIRE®45HD – ALWAYS AVAILABLE AND READY FOR EVERYTHING. 😉

✔️ Maximum cutting speed and quality
✔️Plate thicknesses up to 25 mm and more
✔️Simple operation
✔️Outstanding cost-effectiveness
✔️Gouging and marking functions included

Available now! https://eu1.hubs.ly/H070sWV0
INDUSTRIAL CUTTING. HEAVY-DUTY PERFORMANCE.

😉 How can you simplify cutting circles with a plasma hand torch? We understand the everyday challenges in the workplace, and we want to make life a little easier. One such smart tool is the Circle Cutting Guide Kit. This easy-to-install accessory makes circle cutting a simple process. Try it! 👍

Designed for use with the FHT-EX®105RTXH/105TTH/45TTH torches.

https://eu1.hubs.ly/H070sF30
THINK FRESH. CUT ORANGE.

⁉️ Did you know that plasma gouging is a cutting-edge technique used in the industry to effectively remove protective surface coatings?

⚡ 🔥 Do you want to plasma cut and gouge? Flexibly and with just one device? Without complex mode switching? No problem at all with the new EX-TRAFIRE®HD plasma cutting systems!
This high-performance 4-in-1 solution is ideal for cutting, grid-cutting, marking and gouging. 😉

✔️ Protection surface removal
✔️ Effective welding groove production
✔️ Simple welded joint correction
✔️ High occupational safety standard thanks to lower emissions

Available now! https://eu1.hubs.ly/H070sWJ0
INDUSTRIAL CUTTING. HEAVY-DUTY PERFORMANCE.

❓ 🔥 How many applications does your system handle? The EX-TRAFIRE®45HD offers FOUR in one with impressive performance on top! Cutting, grid-cutting, gouging and marking. 👍

✔️ A practical 4-in-1 solution with easy mode switching
✔️ Cutting and grid-cutting: fast and precise
✔️ Gouging: effective welding groove production
✔️ Marking: clearly label workpieces

Available now! https://eu1.hubs.ly/H070rC80
INDUSTRIAL CUTTING. HEAVY-DUTY PERFORMANCE.

⭐ ⚡ Are you looking for a compact yet extremely high-performance plasma cutting system? The new mobile EX-TRAFIRE®45HD is the ideal starter solution for industrial applications, trade jobs, construction sites and smaller manufacturing companies.

✔️ Plate thicknesses up to 25 mm ✔️ Impressive performance
✔️ Ready for Industry 4.0
✔️ Automatic settings
✔️ Particularly lightweight and portable, weighing only approx. 12 kg

Available now! https://eu1.hubs.ly/H070rV60
INDUSTRIAL CUTTING. HEAVY-DUTY PERFORMANCE.

🔥 🔥 The EX-TRAFIRE®75SD air plasma cutting and gouging system is built to last!
Get the most out of its three modes - cutting, gouging and grid cutting.

Check other benefits like:
✔️Industry leading 16.5 kW output power. Maintains the arc even when stretched for bevel cutting and gouging.
✔️ Built especially for mechanized cutting applications with an excellent manual cutting & gouging performance
✔️ 100 % duty cycle, downtime through overheating is a thing of the past
✔️ Designed to interface with a variety of CNC machines
✔️ 400V±15 %, generator compatibility, tolerates unstable high/low input voltages
✔️ “Blue” LED technology-display, it’s easy to see, even when wearing shaded eye protection

Visit https://eu1.hubs.ly/H070rbF0 to learn more.
THINK FRESH. CUT ORANGE. 🍊

🔥 🔥 Do you already know our EX-TRAFIRE® 45SD – a professional and versatile plasma cutting system? It can cut thicknesses up to 25mm, is lightweight, robust, and easily carried to the jobsite. The easy-to-use Torch Connection System allows you to quickly to change from a manual to a mechanized torch setup for CNC use. 😉

Visit https://eu1.hubs.ly/H070qxM0 to learn more.
THINK FRESH. CUT ORANGE. 🍊

🔥 🔥 Every system is only as good as its components. EX-TRAFIRE® plasma cutting systems are equipped with top-quality torches and leads that have been developed and manufactured in-house to guarantee long-life consumable performance and make changing consumables a quick and easy process. The FHT-EX® are the ultimate high-performance hand and machine torches. 👍

✔️For cutting, gouging and grid-cutting
✔️ Ideal for continuous operation
✔️ The patented Torch Connection System (TCS) makes changing the torch a quick and effortless process
✔️Ergonomic hand torches with light weight highly flexible leads for safer and less strenuous use in all positions and confined spaces

THINK FRESH. CUT ORANGE. 🍊

🔥 Make your tinsmithing work easier with a small yet powerful plasma power supply EX-TRAFIRE®30H! Tinsmithing does not only include the construction of eaves, as many might imagine, but also includes the metal plating of chimneys, valleys and windowsills, the installation of drainpipes, gable trims, etc.

It is often necessary to make cut outs in metal or saw a hole into it, sometimes repeatedly — for example, when connecting or anchoring eaves. Thermacut’s EX-TRAFIRE®30H plasma cutter is ideal for these purposes due to its favorable price-to-power ratio. 😉

Visit https://eu1.hubs.ly/H070qxl0 to learn more.
THINK FRESH. CUT ORANGE. 🍊

🔥🔥 The EX-TRAFIRE®30H plasma cutter is portable and powerful. A true powerhouse system, suitable for hobby and industrial applications.

WIDE RANGE OF JOB APPLICATIONS
✔️ General Manufacturing
✔️ Autobody Work
✔️ HVAC Duct Cutting
✔️ Furniture Manufacturing
✔️ Metalwork Artisan
✔️ Fence Repair and maintenance
✔️ Farm maintenance
✔️ General Contracting
✔️ And much more

COST EFFECTIVENESS
✔️ Exceptionally low investment cost
✔️ Low running costs

Visit https://eu1.hubs.ly/H070rb40 to learn more.

THINK FRESH. CUT ORANGE. 🍊