Racetech fabrication

We had Steve's car in over the Christmas break for the first stage of his build, we did a half cage an rear end with the goal of having it sit low on the 275's, now Steve can get started on his tin work before it returns for the second stage

◇ half cage to tie the rear clip in
◇9" with 31 spline billet Axel's
◇alloy center tru track
◇wilwood brakes
◇chromoly 4 link bars
◇track locator
◇Viking coilovers
◇anti roll bar
◇mcdonald bros frame rails
◇gearbox crossmember
◇15x8 with a 275

S14 2.0

We have been chipping away at getting the s14 ready for next year, powered by a blown bbc

An to think we were going to sell this a couple months ago

Finished up the last few things needed for shanes vs to be sent to wiring, once it comes back we will finish the exhuast an a couple small things then off to the dyno

We have been chipping away on Jordan Sanderson new pro car for 2024, with the aim to be even faster an lighter then his ute witch is a badass car placing 3rd at Lz world tour

We are gratefull to be part of this build with some big sponsors on board, should make 2024 a great year with a awesome team backing him

Shockworks
Zoo Performance
Dewars Performance Engines
Sanderson Motorsport
Premoza Tyres

Done a quick turbo setup for a mates au falcon, gtx3076 turbo, stock manifold with a j pipe, fg intercooler, 3” dump pipe, tial 38mm external gate, 2.5” cooler pipes, running 6psi gate pressure Definitely made a big improvement in the way the car drives now

Big thanks to tim from evolution car detailing getting the 35 sorted with a 2 stage paint correction an ceramic coating, highly recommended

We’ve been busy working on a pretty special car bills trd supra fitted with a 3.3 2jz with all the best brands witch makes building this car very easy we still have a lot to go yet including doing a sequential gear box in the future

• 4” dump pipe
• 4” exhaust
• 4” electric exhaust valve
• 60mm electric wastegate
• cooler pipe with boost clamps
• remove old fuel system
• front fuel tank
• intake pump setup
• Teflon fuel lines

Zoo Performance
Pro Performance Coatings
Frenchy's Performance Garage
G&T Performance Engines
Hypertune

Finished up a 3.5” exhaust for a customers r33 last week as well as modifying a cooler pipe to fit the new turbo setup

We got abit more done on Shane’s vs commodore build, 4” dump pipe, an cooler pipes done using Zoo Performance boost clamps an vband clamps

We have been chipping away on a customer skyline for a couple months now, stripping it back to a bare shell an getting everything cleaned an powder coated, along with a hole heap of aftermarket parts

BUT NOW THE FUN BEGINS, the engine an trans are here for this x275 radial r34

Made a start on the turbo setup on shanes vs commodore build,

80mm pulsar turbo, 4" dump, 2.5" crossover
Zoo Performance 50mm waste gate an bov

Customers engine all together an looking the goods, should make a tuff cruiser in his ht with enough power to have some fun

Zoo Performance 4150 throttle bodies, fuel rails an sheet metal hi rise

Hi-Torque Performance for the freshen up an cam package

Warspeed Industries for the alternator kit, billet valley cover an oil pick up lock

Finished up a r33 from G&T Performance Engines today a lot of work has gone into get this car ready for wiring before the Christmas break

-g&t performance engines prepped rb30, hypertune intake manifold, 90mm throttle body & fuel rail, pulsar g35-1050 turbosmart wastegate

-installed auto an converter, customs trans mount, mounted pwr trans cooler an spal fan along with fittings an hoses

- 3.5” chromoly tail shaft for 1000hp

-billet intake dual fuel hanger, twin 460 pumps, flex fuel sensor, Teflon -8 braid an fittings & fuel Fittler

- 4” dump pipe an exhaust & screamer pipe

- cooler pipes with hypertune cooler clamps, hypertune intercooler

-modified an mounted catch can

-custom washer bottle & over flow tank

-gk tech brake line kit

-along with a lot of small mechanical jobs,plumbing an getting all the sensors in to be controlled by the haltech ecu

-whole car plumbed with Zoo Performance braid, fittings, filters, weld ons, vbands an more

-everything coated by the guys at Pro Performance Coatings an done a killa job at it as well

Had bills immaculate r32 in last week for custom power steering tank an braided lines, window washer bottle an plates to tidy up the existing cooler pipe holes, we also modified his current cooler pipes to cooler clamps to stop them blowing off all the time

Powder coating done in house by Pro Performance Coatings

Had mic's Gemini wagon in for some rear tin work an a quick clean up of the engine bay, now ready for him to install motor an contuine on the build

Finished up brodies tuff little vr4, we done a customer forward facing turbo manifold, 50mm gate with screamer, 3” dump pipe, mounted intercooler an done cooler pipes, mounted rad an done speed flow hoses, catch can an rad over flow, a long with little other finer details

All coating done by Pro Performance Coatings Ap performance coatings

Been working on Brodie’s vr4 for the last week or so, custom forward facing turbo manifold with 50mm turbo smart waste gate, mounted intercooler an half rad as well as catch can an rad over

Next on the list is cooler pipes, full exhaust an dump pipe to finish the fab off then plumb the whole car

Finished up a new turbo kit for a vy ss, done 4-1 headers with egt’s both sides, 3” crossover, screamer pipe & 5”-4” dump pipe

Friday delivery’s are always good, this gtx50 is for a customers big block, should deff be a fun street car

For any Zoo performance turbos, waste gates, blow off vavles, fitting an lines, beanies, coolers we can get it all for great prices

Tidy vl wagon fitted with a g&t performance engine rb30, we had in to do a 3.5” dump pipe, wastegate in rear housing, screamer pipe, intake pipe, bov delete an muffler delete

Finished up the hot side for a customer vl, using ZOO performance gtx55 106mm, 60mm blast gate & 150mm pro series race cooler, 4-1 headers & 3” cross over pipe

Also have notched the tower an fire wall to fit the 5” dump pipe down to the gear box

Zoo Performance do a huge range of parts an are top Quilty, for any pricing or parts send us a message an we will help you out

With work been so busy an a couple of big builds happening We haven’t had time to finish our person radial car, we got a full catalog of gazzard bros parts to finish the chassis off just the way it needs to be

If work stays busy might not have Time to finish it so might sell as a roller once complete

Another 3 rb extended sumps ready to go

Modified rb26 cam cover to suit a rb25 with vct

Started some extended rb sumps for g&t performance engines for some customers builds

We have been busy working on a customers car from Melbourne turning his old vl into a killa street car

We started with giving the engine bay an shave and notching the tub for the turbo

Engine combo is a lsx454 an t400 with a zoo performance gtx55/106mm & race intercooler

Finished up a quick engine bay shave on the vs clubby rep now it’s off to paint an panel

Welded unnecessary holes
Shaved frame rails
Deleted a/c notice
Battery tray panel to match the other side

Finally got time to fit the gazzard bros 9” diff into the s13, once the shocks, track locator an anti roll bar get here we will mount them an finish the tin work then it’s off for abit till the next stage starts

Zoo Performance killing it with this full billet 4g63 intake manifold👌🏻

We have something special coming real soon

Finished the tin work in dans ke70 Corolla this week as well has a new track locator bar, finished it off with a coat of sound deadner as customer requested