Adam Air Pty Ltd

We have just installed this beautiful new Ceccato Inverter compressor. It’s replacing an old 37Kw Pilot with an oil leak. We have data logged the old machine and correctly sized this inverter replacement. We have even cleaned the floor in the compressor shed to make this new installation right. I’m looking forward to hearing how much power savings this customer will have.

We just commissioned this little Ceccato CSA 10 it’s replacing the old Mark compressor that will be refurbished. I’m sure there will be a long life out of this one as well.

Another non standard install. No forklift on site, so AdamAir used Townsend Tippers to transport and position this compressor for our long term customer and deliver the trade in back to our Darra workshop.

Chalk and cheese….we have just replaced this old Sullair compressor with a new Ceccato Full-Feature unit. It’s always a pleasure to change out a competitor machine with one of our own, but this one was even more special. Our customer inherited the old machine when they took over Sullair’s old workshop. They let this customer slip away!

In France this week, the trip is nearly over. A few boring compressors, some tourist attractions and a cold ANZAC day dawn service at Villers-Bretonneux

This week I have been in Ireland. Maybe AdamAir vans are not the dirtiest.😊I finally found a compressor company here, and met up with an old compressor mate.

We visited the Ceccato factory in Montecchio Maggiore in Italy. The factory is a well organised facility with excellent quality standards. They make the smaller Ceccato range, Refrigerated dryers and Inline filter elements on site. The factory manager has worked there for 43 years and has Ceccato close to his heart, he told us some history of the Founder Pietro Ceccato who built the original business and town all before his early death at age 50. AdamAir is proud to sell these products.

Venice today and Ceccato factory tomorrow, hope we see some bigger compressors tomorrow and cheaper coffee, Caffe Florian was good but not cheap!

After a couple of awesome days looking around Rome, we have travelled north by high speed train. Staying at Creazzo near the Ceccato Air Compressor factory. We saw a few things on the way including a rival compressor company, and some replacement statues in case Rome needed them.😁
I had two addresses for Ceccato, and after going to the Brendola address I found they had moved out, and only a “shadow” of a sign was left on the building. The new address wasn’t far away, and was good to find it on the weekend instead of a busy week day.

I just saw this compressor being used on renovation work at the Colosseum. It should be a CECCATO in this country!

We visited Atlas Copco in Antwerp Belgium 🇧🇪 yesterday. Thanks to our wonderful contact Anne-Sophie we had a great day meeting with her colleagues, and were very impressed with the factory operation. The factory tour reinforced our confidence with this supplier.

Arrived last night on my way to Atlas Copco. I stayed right here at the Sheraton hotel at Brussels airport. It was a good call, I couldn’t have gone any further, after about 33 hours in transit!
We will head to Antwerp today.

I have just commissioned two more Ceccato screw compressors. 1 x 20HP base mounted and 1 x 10HP Full-Feature machine. ( The “Full-Featured” version is my personal favourite with the compressor, dryer, and filtration all mounted on a horizontal air receiver.

I have just finished commissioning this new Ceccato inverter compressor for a new customer in Ipswich. I asked how they found AdamAir…the contact was previously employed by another AdamAir customer! Word of mouth is the best advertising.

AdamAir has just sold and installed a new Ceccato in Rocklea. We needed a Mack Truck to deliver the Bobcat and put the machine into the Compressor shed as uneven ground ruled out a normal forklift.

AdamAir is now the contact for Boss Air Compressors spare parts and service. We have just purchased 21 pallets of stock including a couple of New 10Hp cabinet Compressors.

I have just had a call-out to this machine, it was tripping out. There was nothing wrong except it the circuit breaker was undersized! This machine was condemned 10 years ago by a competitor, and there was very little wrong with it then. How many machines are dumped before their time? Get a second opinion like this customer did.

I recently commissioned this new 15hp Inverter compressor in Rocklea, it's the 2nd Ceccato machine for this customer replacing a flood damaged 25hp unit. Their needs have changed over the years and they will enjoy noticeable power savings with the new machine.

We are celebrating today.
Mark Cramond has just reached 10 years service at AdamAir. Congratulations on 10 years of giving your best efforts every day.

Fresh out of the box! This CPM 100 takes the place of an old Ingersoll-Rand, and is the 2nd 100 hp CHICAGO PNEUMATIC for this customer. The older CPD100 machine will now be used as a backup.

Just commissioned this "full feature compressor". The screw compressor and air dryer are mounted on the air receiver making a neat plug- in package. Just connect the power and air pipe and it's ready to go. Nice and bright and made in Italy.

Out with the old and in with the new. Just replaced 2 x Compair L22 with 2 x Ceccato DRB29.

This old girl has gone around the clock...over 100,000 hours! Thanks to Atlas Copco's engineering and AdamAir's regular maintenance. It has stood the test of time, and still going strong.

We have just saved this old classic from the scrap heap. It was completely submerged at Rocklea in the recent floods. It is running again after repairs and just needs a final clean before going back out to the customer. They just don't make equipment like this any more.

We have recently sold a Ceccato DRD75 Permanent Magnet Compressor and Dryer to QSP Engineering. Neville and his team are leaders in Thermal Spray Technology and they required a large volume of air to operate their new High Velocity Oxy Fuel spraying process.
This is Neville's second compressor he has purchased from AdamAir and we look forward to working with Neville in the years to come.

Air Compressor servicing and repair.