DS Custom Toolboxes

Sometimes we get asked to make something a little different.

This day it was a very large box with a slide out drawer for the largest drone we have ever seen!

If you too have what seems to be the strangest request, hit us up, you never know if it’s possible if you don’t ask 😀

It’s almost Grand Final Day! We would like to let all of our customers know that we will be closed Friday the 27th of September for the Grand Final Public Holiday. We will be operating as per usual from Monday the 30th of September.

Where do people go to get truck boxes? DS Custom Toolboxes is where.
We can custom built to your requirements, big or small. With quality welding, powder coating and fitting, if required, we are your one stop shop.
Give us a call on 03 93575003 or email us on [email protected] we will be ready to help you

Like caravans, boxes come in all different shapes and sizes, just like this tear drop caravan, we went from no box to storage box, complete with the spare tyre mounted to the box. This little gem is 900L x 280W x 700H. If you have only a little space to play with but need that little bit more storage space, why not look at something like this?

Another happy camper! Anderson Training Services came to us with a specific need in mind and we were able to manufacture a storage solution that met their individual needs.

Whether you have a caravan, a camper, a trailer or truck we can help you to design and have your vision come to life, all manufactured in our location in Craigieburn Victoria.

Freight options are available from local pick up, installation at our location or freighting anywhere in Australia, there is an option for you.

Call us on 03 9357 5003 or email us at [email protected] for a friendly chat with Darren or Sue.

We here at DS Custom Toolboxes, just love when our customers are happy! Here are some happy snaps sent in from a customer who ordered a custom-built storage box for his caravan. As we always say, storage boxes can come in all shapes and sizes. Thanks James for the great photos.

If you would like to have a custom-built storage box made, give us a call at DS Custom Toolboxes on 03 9357 5003 or email us at [email protected]

Bit of personalised plasma cutting for a good customer of ours JSA Electrical

Clean white Truck box with adjustable shelf fresh from the powder coaters

It’s all happening here today, campervan boxes, caravan boxes, busy busy busy. The boys are killing it

Our DS Legend Single Slider is 1185L x 500W x 735RH made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, adjustable gas struts, 1 x sliding tray with tie down points, locking in/out drawer runners, compression locks all keyed alike and can be powder coated to a colour of your choice.

Place an order and pay the deposit before the June 30th to receive the current 20% discount and free DS Draw Bar Mount Kit (conditions apply)

[email protected] 03 9357 5003

Our DS Legend Double Slider is 1400L x 500W x 735RH made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, adjustable gas struts, 2 x sliding trays with tie down points and locking in/out drawer runners and compression locks all keyed alike and can be powder coated in a colour of your choice.

Place an order and pay the deposit before June 30th to receive the current 20% discount offer with a free DS Draw Bar Mount Kit (conditions apply)

[email protected] 03 9357 5003

Our DS Ultimate Storage Unit is 2200L x 500W x 550H made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, rear vent (for the middle compartment only) adjustable gas struts, 2 x sliding trays with tie down points and locking in/out drawer runners and compression locks all keyed alike and can be powder coated in a colour of your choice.

Place an order and pay the deposit before June 30th to receive the current 20% discount offered with a free DS Draw Bar Mount Kit (conditions apply)

[email protected] 03 9357 5003

We want to celebrate the move to our new workshop location at 30 Rushwood drive Craigieburn with you by offering 20% off new box orders and we will even throw in a free DS Draw Bar Mount Kit with any draw bar box ordered, this offer will run from the 14/6/24 to the 30/6/24 so get your order in quickly to [email protected] or call our office on 03 93575003.

Our product range can be viewed through our website at
www.dscustomtoolboxes.com.au or drop us an email for a custom quote. (conditions apply)

DS Custom Toolboxes has a new home at 30 Rushwood Drive Craigieburn 3064.

Our phone line and nbn is currently down, we are working on the issues and hoping to be back up and running this afternoon 🙂

Our DS Zone Single Slider is made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, adjustable gas struts, locking in/out drawer runners and compression locks all keyed alike with two top opening doors, a left hand side door with sliding tray (520L x 305W), internal divider and is 1730L/1000L x 590W/420W x 680H/605H or can be made in measurements to suit your needs.

Contact the office with any enquiries on 03 9357 5003 or
[email protected]

Have you seen our Underbody range?

Our standard sizes are 700L / 800L / 1000L / 1200L x 240W x 260H made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals and compression locks keyed alike.

Like the style but not the size ... no problem, all of our products are made in our Campbellfield workshop from start to finish therefore we can make a Underbody box to suit your caravan, truck or trailer.

Contact our office for further information 💻 ☎🙋🏻‍♀️
03 9357 5003
[email protected]

The DS Ultimate has 3 x divided compartments with left and right side access doors, 2 x sliding trays and a middle compartment with top door access for 2 x 9kg gas bottles.

The DS Ultimate is made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, adjustable gas struts, rear vent, a set of 500mm and 700mm long locking in/out drawer runners, compression locks all keyed alike and is 2200L x 500W x 550H or can be made in measurements to suit your needs.

Contact our office for further information on 03 9357 5003 or [email protected]

The DS Gas Bottle Box has 2 x top opening doors and internal divider with the left side vented at the back designed to suit 2 x 9kg gas bottles available in a raw silver finish or can be powder coated a colour of your choice and is 1540L x 400W x 550H.
All of our products and product information can be seen through our website at www.dscustomtoolboxes.com.au or contact our office for further information on 03 9357 5003 or [email protected]

Have you seen our DS Open Top Box range?
We make Open Top Boxes to suit a 2KVA Honda, 3KVA Honda a Webber Baby Q or can make an Open Top Box in the measurements you need. These boxes are made in 2mm aluminum checker plate using weld on hinges, all weather rubber seals, adjustable gas struts, vents (if required) and compression locks all keyed alike in a raw silver or powder coated finish. All of our products, product information and pricing is available to view through our website at www.dscustomtoolboxes.com.au for custom enquiries please send an email to [email protected] or call our office on 03 9357 5003.

Why Choose Our Custom Aluminum Caravan Boxes?
Tailored to Fit: Each box is custom-made to seamlessly integrate with your caravan.
Durable Construction: Made from lightweight yet sturdy aluminum to withstand rough travels.
Secure Storage: Keep your belongings safe with our reliable locking systems.
Maximize Space: Say goodbye to clutter and hello to organized storage space.
Ready to upgrade your caravan experience? Contact us today to get started! [email protected]

A huge thank you to John for the purchase of one of our DS Legend Double Sliders with fitting. Our DS Legend Double Slider is 1400L x 500W x 735H made in 2mm aluminum checker plate using weld on hinges, all weather rubber seal, adjustable gas struts, locking in/out drawer runners and compression locks all keyed alike in a black powder coated finish. All of our products, product information and pricing can be viewed through our website at www.dscustomtoolboxes.com.au If you would like a quote, send your enquiry to [email protected] or call the office on 039357 5003

Tipper storage units made to size in aluminum or steel, shelving, closed drawers, open sliding trays ... no worries! We make all of our products here in our Campbellfield workshop. Enquiries can be sent to [email protected] or call our office on 03 9357 5003

Did you know we also fabricate storage/toolboxes for trucks, trailers and Utes? Drop us an email to discuss your ideas at [email protected] or call our office on 03 9357 5003

We can make full or half canopies to suit your tray and fit here at our Campbellfield workshop. All 100% Australian made to suit your Ute and working needs. Send your enquiry and measurements for a quote to [email protected] or call the office on
03 9357 5003.