Harness Pro Australia

Our Workshop will be temporarily closed today at 1pm. Repoening at 2pm.

From Harness Pro Australia we would like to wish everyone a Merry Christmas and a Happy New Year

Please note our office will be closed from Friday the 23rd of December and will reopen on the 3rd of January 2023

It was great to receive a supportive visit from Mayor Greg Williamson today on the HPA stand at QME.

Great to meet the guys from Harness Pro Australia a local Mackay business, developing and manufacturing out of their Paget-based workshop and supplying across Australia. Great stuff.

The lads have done a mint job of this Aircon refurb.

We have some very exciting news to start off 2020. We will be moving into a larger facility to help us service our current and expanding customer base.
Our new premise is located on the corner of John Vella drive and Connors road. We will be moving in stages over the next few weeks to minimise any inconvenience. We hope to see you soon at our new location.

Good to catch up with the team before Christmas. Merry Christmas everyone.

We all know that one person who has a red hot go.

A customer came to us looking for a solution to there current isolation/circuit breaker box on there water truck. Due the the extreme conditions it was suffering from corrosion and rust. So we developed our enclosed stainless steel isolation box to prolong the life of the switches and circuit breakers.

The team recently manufactured and fitted a complete control system to convert this 785 into a prime mover ready to be commissioned on site.

With weather like this it sure is good to have an aircon work shop.

Check out our emergency stops made specifically for harsh environments with red and green illumination you will know exactly which E-stop has been activated. We can also fit with a 4 pin deutsch plug to make it a plug in option to limit down time.

What an epic job. With over 1400 termination points this 16m grader harness gave the test bench a run for its money.

Harness Pro Australia

Wow what a year
With a mountain of work to get through we haven’t had time to post anything.

Harness Pro Australia are currently seeking two qualified auto electricians to join our rapidly expanding business in Paget. We specialise in everything from harness manufacturing to machine overhauls and we pride ourselves on our high quality products that provide an innovative solution to all industries. If you are a reliable, hard working individual that is looking for the perfect work life balance in air conditioned comfort then please apply within. The position is full time and offers attractive rates Please submit your resume to [email protected] or come in to our Paget facility at 52 Southgate Drive.

We are currently seeking an enthusiastic and hard working trade assistant to join the Harness Pro team. Applicant must have proficient computer skills and a keen desire to learn. Electrical circuit knowledge highly regarded.
Please submit your resume to: [email protected]

We are currently seeking an enthusiastic and hard working trade assistant to join the Harness Pro team. Applicant must have proficient computers skills to operate our automated processing equipment. Electrical circuit knowledge highly regarded.
Please submit your resume to: [email protected]

We are seeking a qualified auto electrician to join our rapidly expanding business. If you are a reliable, hard working individual that is looking for the perfect work life balance please contact me on 0438655742

We are desperately seeking a full time Parts Interpreter/procurement officer for HPA to start immediately. Previous experience desired but not essential. We are interested in a hard working, hands on individual that uses his/her initiative and works well within a team environment.
Please PM or phone myself on 0438655742 for more details

The test bench upgrade is coming along nicely with 4096 test points. This should make life easier. Thanks heaps to the boys for there hard work in wiring it up.

It has been a hectic past few weeks with a sea of yellow going out the door. Here’s a 793B harness almost ready for one of our WA customers.

Harness Pro Australia are looking for another auto sparky. We are looking for someone who is passionate about their trade and takes pride in their work.

Keep in mind that summer is fast approaching and we house a state of the art air conditioned workshop. Enjoy every weekend to yourself as we operate Monday to Friday. We offer an attractive hourly rate and have a great team.

Please phone or pm myself for details
0438655742.

Here are some before and after shots of a 930H engine harness the customer required a full booted spec because the machine is in a blast area.

The orders are coming in quick and fast so we are looking for another auto sparky. We are looking for someone who is passionate about their trade and takes pride in their work.

Keep in mind that summer is fast approaching and we house a state of the art air conditioned workshop. Enjoy every weekend to yourself as we operate Monday to Friday. We offer an attractive hourly rate and have a great team.

Please phone or pm myself for details

Another busy week at HPA.

Some more 793F harnesses out the doors this week.

The new signs are up and looking great. Thanks to Mick baker for organising them.

Here is a very good example of what happens inside corrugated conduit. Braiding stops internal movement of the wire preventing this for occurring.

A massive couple of weeks at HPA. Thanks heaps to the team for there efforts.

Here's a few photos of a well known brand of OEM harness as you can see the quality is poor with wires kinked exceeding the minimum bend radius and terminals that aren't crimped properly. All of our harnesses are made to the IPC standard which prevents this from happening.

Just because it works doesn’t mean it’s right.

Another order for a customer who needed his machine up and running quickly and couldn’t wait for parts to be sent from Singapore. And with the advantage of marine grade high temp wire the decision is simply.

Another busy week at HPA. Processing the next lot of orders and making up some promotional stuff.

You’re probably wondering how we make our OEM replacement harnesses. For harnesses we don’t already have on our database we require an old sample harness for a reference. With this sample we document all of the connector part numbers and branch dimensions. This harness is then plugged into our test bench which can test up to 512 connection at once, this also determines if there are any splices or junctions we then determine the wire size, colour and ID number on each wire. We check this data against OEM schematic and parts manuals. We then put all of this data into our 2D CAD harness drawing program where the build plan, bill of materials and wire cut list is generated and saved on our database. From here the harness is ready to make using marine grade wire to suit the mining conditions. Once assembled the new harness is plugged into the test bench and tested against the original sample.

Harness Pro Australia's cover photo

Harness Pro Australia is now ISO certified.
This means every single one of our products has undertaken our 10 stage Quality Assurance process and has been manufactured and tested in accordance with
IPC/WHMA-A-620C. This ensures every raw material used and every stage of the assembly process have been checked to ensure our customers only get the highest quality product.

Some more orders going out the door, a full set of CAT 793D chassis harness and CAT D11R left and right fender and nose cone harnesses.

It has been a busy couple of weeks at HPA with our open day, showing some of our customers through our purpose built harness manufacturing facility and explaining our 10 stage quality control process. And showing them some great new products.