Berry Welding n Fab

Not exactly recommended but will withstand a severe hiding 😂 good to see Andrew stacking up some numbers and putting his machine through its paces! 🐗🐗

Another off to run amok down in Mexico on a brand new CanAm Defender limited! Keen to see it mounted up! Cheers

Quick to get this bu**er picked up, mounted and out getting amongst a few 🐗 on Friday 👌🏽 🍻

Late night fit up when the boys rolled in on Friday night with the machine,heading out to get into a few 🐗 making things work is what brings the returning customers back 👌🏽 satisfaction guaranteed 🔥 Tony Vee

V2 for the big girl! This build has it all! The Big Game edition Polaris is a monster of a machine so it’s only natural To throw all the fruit on it! Sealed storage, removable/adjustable lifting arm, rear removable/folding shooting rests and also braced up the roof mount spotty 🦾 good to dance with big 🐗 now 👌🏽

‼️FOR SALE - FORGET THE WAIT‼️Only half a dozen trips under its belt we have an on tub setup to suit a Polaris Ranger 1000. Quick and simple, easy on and off. Turn buckle to the hold down points which are located in the factory tubs on the Polaris. 17.5 litre rear water tank. Full in tub storage, still accessible by dropping the tailgate. Run your spray rig during the week & chase pigs by the weekend 👌🏽 Definitely suit Dad’s Polaris 😜 $4100 negotiable.

Not just UTV trays 🦾🐗

A setup off to Central QLD for a Can Am XMR. Running the removable drop sides and bolt on Dog box setup 🦾 work and play 🐗

That’s what they are built for… to use and abuse! And stand up to it 🐗🐕🦾

It’d be nice!

Can’t wait to see this setup all fitted up next month on the Honda Pioneer 1000 👌🏽

Another build from last week all fitted up today to head back to the mountains for some play time 🐗 plenty of space on this one with the rear basket and for size removable doors 👌🏽

Gun rest rail with built in handle to replace the the factory job for the workshop communal Polaris 1000 🤪

A few lengths of ally turned into something useful 🐗🐕 👌🏽

1st machine out of the new workshop 🦾 loads of extras on this Polaris Northernstar 🐗

✅ Twin tanks- water and fuel

✅ Side slide rails

✅ Quick release solenoid doors

✅ Work light mount plates

✅ Quick release solenoid plates on the headboard

✅ Full wrap around top tie rail

✅ Swinging centre divider

✅ Pumped gaurds

Few ally veranda posts out for powder coat, then to be topped with live edge timber slab and stainless wire intermediate horizontals 👌🏽

1 of a few small jobs last week. When you can’t buy off the shelf, custom it is. Powder coated scrub rails to suit the factory Polaris tilt forward bar work on this little 570 machine.

Another cage out this week on Bens Polaris Ranger 1000 👌🏽 🐗🐕

Dave’s new whip came up unreal! Wrapped in mossy oak white Camo and all accessories bolted up by the boys
The cage setup is the same as last machine, running the on tub to utilise the storage underneath 👌🏽🐗🐕

Couple of builds getting out and about 🐗🐕✊🏽

QLD bound Honda Pioneer 1000 setup ready for freight.
Sporting all the gear! Sealed rear access storage box, jerrycan holder, hanging spikes, grab rail and all the normal gear as well. Ready for some serious work 🐗🐕

‼️‼️‼️It’s that time of the year! 10% off your build if you lock it in before JUNE 30 👌🏽 PM to discuss your ideas and design and we will make it happen 🛠️‼️‼️‼️

Can’t wait to see this one mounted up on Dave’s new Polaris 1000 XP that’s been wrapped in white mossy oak Camo 👌🏽 very similar to his last setup I built for his 570, running the on tub setup to utilise the storage of the tub under the floor.

🎉 WE ARE CHANGING OUR NAME! 🎉

Mudgee Mini has grown so much since starting back in 2020 thanks to the support of you, our local community.

We have catered to a vast range of needs here in the Central West and have thoroughly enjoyed expanding our services.

As we continue to grow, we believed it was time to transition from Mudgee Mini Earthmoving to -

Mudgee Earthmoving & Rural Contracting

Our list of updated services include -

•Road Building and Repair
•Driveway Building and Repair
•Levelling Pads
•Dam Building
•Clearing
•Erosion Repair and Prevention
•Vineyard Removal
•Rubbish Removal
•Large Animal Burial
•Retaining Walls
•Fencing
•Yard Building and Entrance Ways
•Spot Spraying and W**d Control

If you have any questions about our services, don’t hesitate to get in contact with us -

0402 668 033

We look forward to hearing from you and continuing to grow and service Mudgee and the Central West.

Looking for a ready to go setup!? Jump on this tidy rig!

Tilpa bound! A cage setup that went out to go a Can Am XMR.

Orders are coming in thick and fast for this one man show so sing out to lock in a build as lead time is getting up there 👌🏽

Another one out the door! Cracking setup on this HD9 👌🏽

Built for work…and play 👌🏽

Custom is,as the customer wants👌🏽 2023 Honda Pioner 1000 build out the door.

Another cage to suit a Can Am XMR off to its new home out on the Darling river. This setup is for his working dogs so optioned up with a secondary water tank and 4 removable doors. 🐕 🦾

Bit of versatility with this red rocket, going all the options 👌🏽

https://youtu.be/dm1nhcRgh4I

😂😂this would have to the best one yet! 😂

Dual Cab V8! Silver Spoon Sam wants a new V8!-------------------------------Follow us below 🍻www.instagram.com/angrychristmaswww.facebook.com/AngryChristmasProductionsww...

One for the Honda fans.
This Pioneer 1000 heading out with all the fruit 🦾 including the overhead rifle box.

Another one out last week headed to central QLD 🐗 this one to suit a new Can Am HD10 XT the customer is waiting to receive.
Can’t wait to see it fitted up 🦾

Another Can Am XMR that went out in the last fortnight. Jessie at wasting no time sending it out west, getting stuck into a few🐗🦾