Australian Pickling & Passivation Service

Pickling, passivation & electropolishing of stainless steel and high nickel alloys
Descaling of car

Photos from Australian Pickling & Passivation Service's post 16/07/2024
Photos from Australian Pickling & Passivation Service's post 26/05/2024

Sometimes our customers send us to some special places.
Whilst it is a sewerage treatment plant, it is pretty special place.
The Whitsunday Islands - Cardwell FNQ.
It took 3 days 2000km’s each way to deliver the goods.
Another great job by the guys at Murray Engineering in Sydney
Shout out to Jimmy and Malcolm for allowing us to goto these places with their products.
I wonder if they’ll help me wash the truck.

01/05/2024

Some customers ask us how big our bath is. I then ask an easier question- How big is your job!
As you can see in this picture, we can handle the largest of fabricated items.
These pipes were 13 metres long.

Photos from Australian Pickling & Passivation Service's post 01/05/2024

Timer move a lot of SS out of the premises.
Our customer Murray Engineering has fabricated a lot of pipe work for a new sewerage treatment plant on Bribe Island in Queensland.
There are 2 semi trailers loading at 10.00am for a 7.00am delivery the next day.
APPS has been picking the pipes up as they were fabricated and then pickling and passivating. We then packed them and stored the pipes until the whole job was ready to be transported.
Thanks to the team at Murray Eng for entrusting APPS to transport and treat.

Photos from Australian Pickling & Passivation Service's post 01/05/2024

We welcomed a new customer in April.
JBC Yacht Engineering in Sydney 02 9188 0825.
The owner George has asked to pickle and passivate the SS 316 and 2507 grade castings for the Seahawk range of low drag self feathering and folding sailboat and yacht propellers.
After the propellers have been machined we get them back again and the we make them bling like this one pictured.
These propellers are sold globally.
We have established a great relationship with George and look forward to working with him into the future.

Photos from Australian Pickling & Passivation Service's post 01/05/2024

A few sneak peak shots of one of our biggest electro polish jobs we’ve tackled.
We are about halfway through the 1000m walkway in Vaucluse.
Our customer Elite Fabrications in North Wyong is fabricating these panels and posts.
Nice work Graham and team.

Photos from Australian Pickling & Passivation Service's post 28/04/2024

A small heat exchanger electropolished for our customer Teralba Industries in Campbelltown

Photos from Australian Pickling & Passivation Service's post 28/04/2024

Another neat job by our customer GSJ Fabrications in St Marys.

28/04/2024

Peace Man!

Photos from Australian Pickling & Passivation Service's post 28/04/2024

Busy times
Pressure has been intense for all of the team.
This job has to be completed for other trades to follow.

13/08/2023

Australian Pickling and Passivation Service

13/08/2023

You can always count on Dave from Australian Pickling and Passivation to get the big jobs done.
This vessel weighed in around 50 tonnes.

26/07/2023

Our customer has sent us 5 of these 4mm thick 1500 diameter spiral welded pipes 6 metres long to be pickled

Photos from Australian Pickling & Passivation Service's post 26/07/2023

G’day
I would like to introduce you to our newest pickling and passivation tech Caleb
He is learning very quickly
He is an asset to the team

Photos from Australian Pickling & Passivation Service's post 11/05/2023

Cold outside this morning but the APPS team are already hard at.

03/05/2023

How’s this for the new number plate!

03/05/2023

Tonight we are off to Port Douglas with a load of pickled material for a new water treatment plant
Should be there on Friday.

Photos from Australian Pickling & Passivation Service's post 03/05/2023

Here we are delivering a vessel to Millmerran Power station for one of our good customers.

11/04/2023

Today we had a VERY big surprise visit from Frank Morris the Managing Director of SRL UK (Stainless Restoration Limited) one of the largest Pickling, Passivation , Electro Polishing ,Glass bead blasting and plastic fabrication companies in the UK.
It was great, Frank spent a few hours with us exchanging stories and showing us a few tricks of the trade.
Thanks Frank we really appreciate your input and conversation.

Photos from Australian Pickling & Passivation Service's post 08/03/2023

Here’s a couple of tanks we’ve done in the last few weeks
Tanks everyone!
If you have a tank being fabricated and it will require pickling, then give us a call on 0400816290.

Photos from Australian Pickling & Passivation Service's post 28/07/2022

Today we we had the pleasure of showing a new customer what we are capable of
Garbage bin cover - completely electro polished.

28/06/2022

Did you know that we also descale carbon steel pipes?
Here is part of a semi trailer load from Adelaide which arrived today.
These pipes are for hydraulics on a machine to compress hay bales - I’m told.

24/06/2022

Super Duplex Saturday

08/06/2022

Can’t seem to contact any of our customers today - Telstra down!
# funny steel # Australianpickling

Want your business to be the top-listed Engineering Company in Tomago?
Click here to claim your Sponsored Listing.

Videos (show all)

Stainless Steel Egg By Aaron Twigg

Telephone

Address


5 Martin Drive
Tomago, NSW
2322

Opening Hours

Monday 7am - 3:30pm
Tuesday 7am - 3:30pm
Wednesday 7am - 3:30pm
Thursday 7am - 3:30pm
Friday 7am - 3:30pm
Saturday 5am - 11am

Other Tomago engineering companies (show all)
Varley Group Varley Group
21 School Drive
Tomago, 2322

Official Varley Group page. Varley is one of Newcastle’s oldest and most advanced engineering companies. Find us online at www.varleygroup.com.