Noman Group of Industries

The Bold and The Beauty

""ITML""

""TSML""

Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile and garment products around the world and employ about 70,000 people
It was established in 1968. It was the largest vertically integrated textile group of companies in Bangladesh. In 2011, Noman Group opened six textile factories by that time, the company was operating 19 plants employing about 40,000 people. In 2012, Noman opened a towel factory. By 2022, the company operated 43 factories, and some new plants were under development.
Zaber & Zubair Accessories Ltd sister concern of Noman Group. Accessories are one of the important parts of the garment manufacturing sector so Noman Group also has its own accessories factory.
Noman Group Manufacture Leading Durable Plastic Hanger and many other products.

Hanger Making Machine in Noman Group || Hanger manufacturer in BD Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile an...

Noman Group || Nice Synthetic Yarn Mills Ltd || Dryer Part 2 Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 70,000 people. In...

Cotton Yarn Spinning Process in Noman Group
Unifloc A10 Rieter Bale Opening / Rieter Blow room Unifloc A10 picking section
Zubair Spinning Mills Ltd. (A concern of Noman Group)

Cotton Yarn Spinning Process in Noman Group || Yarn Manufacturing BD || Spinning factory BD Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile an...

Noman Group || Nice Synthetic Yarn Mills Ltd || Dryer Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 70,000 people.In ...

Every pneumatic conveying system would use pipes or ducts called transportation lines that carry a mixture of materials and a stream of air.
These materials are such as dry pulverized or free-flowing or light powdery materials like cement, fly ash, etc.
These materials can be transported conveniently to various destinations using a stream of high-velocity air through pipelines.

Products are moved through various tubes via air pressure, allowing for extra vertical versatility.
Pneumatic Conveyors are either carrier systems or Dilute Phase Conveyors; carrier systems simply push items from one entry point to one exit point,
such as the money-exchanging tubes used at a drive-through bank window.
Dilute-phase systems use push-pull pressure to guide materials through various entry and/or exit points.
It is important to note that either air compressors, vacuums, or blowers can be used to generate the air.
This will all depend on what the engineers think will be the most efficient and economical way of developing the system.

Three basic systems are used to generate a high-velocity air stream:

Suction or vacuum systems, utilize a vacuum created in the pipeline to draw the material with the surrounding air.
The system operates at a low pressure, which is practically 0.4–0.5 atm below the atmosphere, and is utilized mainly in conveying light-free-flowing materials.
Pressure-type systems, in which positive pressure is used to push material from one point to the next.
The system is ideal for conveying material from one loading point to several unloading points. It operates at a pressure of 6 atm and upwards.
Combination systems, in which a suction system is used to convey material from several loading points and a pressure system is
employed to deliver it to several unloading points.

Chips Conveying||Spinning||Noman Group Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 70,000 people.Eve...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 70,000 people.
What is an air handling unit (AHU)?
Tuesday 27 April 2021
An air handling unit commonly called an AHU, is the composition of elements mounted in large, accessible box-shaped units called modules, which house the appropriate ventilation requirements for purifying, air-conditioning, or renewing the indoor air in a building or premises.
They are usually installed on the roof of buildings and, through ducts, the air is circulated to reach each of the rooms in the building in question.
Main functions of an AHU
In addition to managing the proper ventilation of the interior with outside air, the AHU performs other functions:
Filtration and control of the quality of the air that will reach the interior, thanks to the air purification filters,
and depending on the retention of these filters,
the air will be clean.
Control of the air temperature that regulates the air conditioning system in cold or hot, so that the thermal sensation in the interior is the desired one.
Relative humidity monitoring for greater indoor comfort.
For its part, the places for which the AHU is intended are those in which the flow of people is very large and accumulates many people at the same time and whose natural ventilation is limited: hotel dining rooms, function rooms, restaurants, convention halls... It is also a suitable option for those spaces with very high hygiene requirements: laboratories, clean rooms, or operating theatres, among others. An AHU can also be used to ventilate places where air conditioning is provided by radiators or underfloor heating, for example.
What does an AHU consist of?
Sketch of the components of an Air Handling Installation
Air intake: air handling units collect air from outside, which is treated and distributed throughout the rooms; and/or indoor air that is "recycled".
Filter: depending on the air purity requirements, the filter applied will have a higher or lower particle, viruses, bacteria, odors, and other air pollutants retention.
Fan: this is an electromechanical system that powers the air to expel it from the AHU to the ducts that distribute the air throughout the rooms.
Heat exchangers: devices that transfer temperature between two fluids, in this case, coolant and air, separated by a solid barrier.
Cooling coil: the air passing through this module is cooled. In this process, water droplets can be generated, which are collected in a condensate tray thanks to the built-in droplet separator.
Silencer: coatings that considerably reduce the sound level of the installation.
Plenums: empty spaces in which the airflow is homogenized.
The energy efficiency of AHUs
The ultimate aim of an air handling unit is energy efficiency and this is mandatory since 2016 by the European Ecodesign Regulation 1235/2014.
By having heat recovery units, the AHU reduces the use of energy required in air conditioning, as in the exchanger, the indoor and outdoor air is mixed, so that when the air reaches the coil the temperature contrast is lower, therefore, the climatic contribution is also lower and the energy consumption is also reduced.
Likewise, the variable regulation of the equipment means that the fans can work according to the flow rate needs, reducing their consumption.

Noman Group||Air Handling Unit ||Part 1|| NSYML Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 70,000 people.Wha...

Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector.Its companies export annually about $1 billion in textile and garment products around the world, and employ about 70,000 people
It was established in 1968. It was the largest vertically integrated textile group of companies in Bangladesh. In 2011, Noman Group opened six textile factories by that time, the company was operating 19 plants employing about 40,000 people.In 2012, Noman opened a towel factory.By 2022, the company operated 43 factories, and another some new plants were under development.
Saad Saan Textile Mills Ltd sister concern of Noman Group. Noman Group weaving factories are also leading vertically integrated textile group in Bangladesh. The group focuses on 100% export to international markets of products such as fabrics, RMG, home textile, terry towel and denim. In 2015, the group's total exports resulted in a turnover of USD 1 billion. It currently has 33 subsidiaries including Zaber & Zubair Fabrics Ltd, Nice Fabrics Processing Limited, Ismail Anjuman Ara Limited, Talha Texpro Limited.
Weaving is a technique for interlacing two or more strands of yarn, twine, or thin strips of material to make a fabric. Weaving is the process of interlacing two sets of threads at right angles to each other to create a fabric. The most common types of weaving are plain weave and twill weave.
Weaving can be done with a loom or on a handloom, but it is typically done by machine. Weaves are often distinguished from non-wovens (such as paper) and other types of fabricated materials such as knitwear and felt.
The weaving process starts with two sets of threads that are very fine and thin. It then proceeds with one thread from each set being passed back and forth over the other thread until the two threads become one thick thread that is then passed over the first thick thread again before being passed back.
The process of weaving is a long and complicated one. It involves two strands of yarn or thread being wound around each other to create a fabric.The process begins with the creation of a warp, which is made up of two or more threads that are twisted together to form the foundation for the weaving. The warp threads are then used to weave the weft, which is made up of threads that are interwoven with the warp threads to create the fabric.Put simply, the process of weaving takes place in three steps:
First, the warp threads are arranged in a specific pattern that creates a fabric.
Next, the weft threads are passed through the warp threads and woven into the fabric.
Finally, the cloth is finished with any type of border or trimming.

Noman Group||Textile Industries BD||Fabric Weaving Process||Weaving Process in Textile Industries Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector.Its companies export annually about $1 billion in textile and...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.
A cooling tower is a device that rejects waste heat from the atmosphere by cooling a coolant stream, usually a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb temperature—bulb air temperature using radiators.
Typical applications include cooling the circulating water used in oil refineries, petrochemicals, other chemical plants, thermal power stations, nuclear power stations, and HVAC systems for cooling buildings. The classification is based on the type of air induction into the tower: the main types of cooling towers are natural draft and induced draft cooling towers.

Cooling Tower||Nice Synthetic Yarn Mills Ltd||Utility|||Noman Group Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.A c...

""ITML ""

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 50,000 people.
Ring spinning in Noman Group is a method of spinning fibres, such as cotton, flax or wool, to make a yarn.
The ring frame developed from the throstle frame, which in its turn was a descendant of Arkwright's water frame.
Ring spinning is a continuous process, unlike mule spinning which uses an intermittent action.
In Noman Group ring spinning, the roving is first attenuated by using drawing rollers, then spun and wound around a rotating spindle which in its turn is contained within an independently rotating ring flyer. Traditionally ring frames could only be used for the coarser counts, but they could be attended by semi-skilled labour.

Ring Machine || Ring Spinning Process in Textile || Noman Group Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1968, the privately held company employs 50,000 people.Rin...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.
Water Treatment:
Public drinking water systems use different water treatment methods to provide safe drinking water for their communities. Public water systems often use a series of water treatment steps that include coagulation, flocculation, sedimentation, filtration, and disinfection.
Water treatment steps:
Coagulation
Coagulation is often the first step in water treatment. During coagulation, chemicals with a positive charge are added to the water. The positive charge neutralizes the negative charge of dirt and other dissolved particles in the water. When this occurs, the particles bind with the chemicals to form slightly larger particles. Common chemicals used in this step include specific types of salts, aluminum, or iron.

Flocculation
Flocculation follows the coagulation step. Flocculation is the gentle mixing of the water to form larger, heavier particles called flocs. Often, water treatment plants will add additional chemicals during this step to help the flocs form.

Sedimentation
Sedimentation is one of the steps water treatment plants use to separate solids from the water. During sedimentation, flocs settle to the bottom of the water because they are heavier than water.

Filtration
Once the flocs have settled to the bottom of the water, the clear water on top is filtered to separate additional solids from the water. During filtration, the clear water passes through filters that have different pore sizes and are made of different materials (such as sand, gravel, and charcoal). These filters remove dissolved particles and germs, such as dust, chemicals, parasites, bacteria, and viruses. Activated carbon filters also remove any bad odors.

Water treatment plants can use a process called ultrafiltration in addition to or instead of traditional filtration. During ultrafiltration, the water goes through a filter membrane with very small pores. This filter only lets through water and other small molecules (such as salts and tiny, charged molecules).

Water Treatment Plant || Pump Room || Substation || Noman Group Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.Wat...

Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile and garment products around the world, and employ about 70,000 people It was established in 1968. It was the largest vertically integrated textile group of companies in Bangladesh. In 2011, Noman Group opened six textile factories by that time, the company was operating 19 plants employing about 40,000 people. In 2012, Noman opened a towel factory. By 2022, the company operated 43 factories, and another some new plants were under development. Spinning is the crucial and significant stage of processing textile products. In the method of spinning the extracted fibers are made into yarn and are used in the production of textiles like as Talha Spinning Mills Ltd. (A concern of Noman Group). The thread is a type of yarn intended for sewing, knitting, weaving, embroidery, etc. Before spinning cotton yarn, the obtained plant fiber has to go through several procedures to remove impurities such as blending, opening, cleaning, and drawing to obtain a final yarn of desired thickness. The process of producing yarns from the raw cotton in Noman group the strands of cotton fibers are twisted together to form yarn. The yarn is placed on the rings of the spinning frame and is allowed to pass through several sets of rollers, which are rotating at a successively higher speed.
Spinning Industry BD || Noman Group of Industries BD

Noman Group || Cotton to Yarn Process || Yarn Manufacturing Process || How Make Yarn from Cotton Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile an...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.
Spinning super-microfiber and microfiber filament yarns
The quenching system is a critical component that enables
the production of microfiber yarns. For existing spinning
plants, Oerlikon Barmag offers solutions for upgrading your
current quench system, transforming it into the proven EvoQuench radial quench system.
EvoQuench advantages
• Product range of between 0.5 and 3 dpf for super-microfiber, microfiber, and standard yarns;
• Extremely effective and uniform quenching for excellent
yarn quality;
• 80% reduction in quench air consumption;*
• Minimum operating costs with reusable, robust long-life
quenching candles.
From cross-flow to EvoQuench, Oerlikon Barmag’s quench
the modification offers substantial energy savings and quality
improvements for existing plants.
Designed for fast return-on-investment
With very short delivery and installation times, you are guaranteed a fast high return on investment.
In comparison to the same process on cross-flow quenching, EvoQuench provides an immediate economic benefit
by reducing the air consumption* by 20 million cubic meters
– per position and per year. This generates significant energy
savings required for cooling the quench air.
Furthermore, excellent yarn quality with optimum Uster
values, elongation, and dyeability are achieved. For example,
EvoQuench improves the Uster value from 1.09 to 0.55 and
the coefficient of variation from 1.39 to 0.71 for 75den/f144
POY yarn.

Noman Group || Nice Synthetic Yarn Mills Ltd || Spinning Floor || EVO Quench Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.Spi...

Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile and garment products around the world, and employ about 70,000 people
It was established in 1968. It was the largest vertically integrated textile group of companies in Bangladesh. In 2011, Noman Group opened six textile factories by that time, the company was operating 19 plants employing about 40,000 people. In 2012, Noman opened a towel factory. By 2022, the company operated 43 factories, and another some new plants were under development.
Zaber & Zubair Accessories Ltd sister concern of Noman Group. Accessories are one of the important parts of the garment manufacturing sector so Noman Group also have its own accessories factory. Apparel cannot be fulfilled without the use of accessories such as printing & Packaging. There is so many garment accessories manufacturer in Bangladesh and Zaber & zubair accessories ltd sister concern of Noman Group top of them. They are produced different types of garment accessories for apparel manufacturing companies.
Zaber & Zubair Accessories Ltd sister concern of Noman Group has big printing section which called Pre Press in accessories manufacturer of Bangladesh. Pre Press Section machine list in Noman Group
Offset Printing 5 Color Machine
Offset Printing 2 Color Machine
Offset Printing Single Color Machine
CTP (Plate Makeing Machine)
Lamination in
Auto Dye Cutting
Polar Cutting
Paper Cutting
UV Lamination
Foil Printing
Pasting
Dianamic Design Section
This video Offset Printing CTP Pre Press Operation in Noman Group.Computer-to-plate (CTP) is an imaging technology used in modern printing processes. In this technology, an image created in a Desktop Publishing (DTP) application is output directly to a printing plate. CTP methods differ according to the construction type of the imagesetter and the light source used to expose the plate surface. In terms of construction type there are three different kinds: internal drum, external drum and flat-bed imagesetters. The two main light sources used to expose the plate are ultraviolet light lamps and laser diodes. The wavelength and energy of the laser diodes depend on the type of plate that is used. This technology is mainly used in newspaper and magazine printing.

Offset Printing CTP Pre Press Operation in Nomana Group Noman Group is one of the largest Bangladeshi conglomerates in the textiles and garments sector. Its companies export annually about $1 billion in textile an...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.
An Air compressor is a pneumatic device that converts power into potential energy stored in pressurized air. By one of several methods, an air compressor forces more and more air into a storage tank, increasing the pressure. When the tank's pressure reaches its engineered upper limit, the air compressor shuts off. The compressed air, then, is held in the tank until called into use. The kinetic energy provided by the compressed air can be used for various applications such as pneumatic tools as it is released air and the tank depressurizes. When tank pressure reaches its lower limit, the air compressor turns on again and re-pressurizes the tank. An air compressor must be differentiated from a pump because it works for any air, while pumps work on a liquid.

Air Compressor || Utility Department || Noman Group Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.An ...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.

New Extruder Machine Floor for Synthetic Yarn in Noman Group. Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.Nyl...

Zaber & Zubair Accessories Ltd.(ZnZAL)
(A sister concern of Noman Group)

Top Garment accessories making machines in Noman Group

Top Garment accessories making machines in Noman Group Top Garment accessories making machines in Noman Group Best flexo printing machine in BD, Machine Quality is too much highTop Garment accessories making mach...

Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.
Winder Machine: Winders have a center roll on which the material is wound up. Often there are metal bars that travel through the center of the roll, and are shaped according to their intended purpose. A circular bar facilitates greater speed, while a square bar provides a greater potential for torque. Edge sensors are used to sense how full the center roll is. They are mounted on adjustable slides to accommodate many different widths, as the width increases as the center roll is filled. The sensitivity of the sensor depends on the required speed of operation.
https://www.youtube.com/channel/UCI-Clkk9XxL54Geb3LJvkug?sub_confirmation=1

Barmag Machine with Wings Winder in Noman Group. Noman Group is the leading manufacturer and exporter of textile products in Bangladesh. Founded in 1997, the privately held company employs 50,000 people.Win...

.......ZuSML......