Concrete Overlay Systems

Showroom Rejuvenation over the Long Weekend in this Electrical Wholesalers Customer Service/ Showroom area. They needed to be back open for business first thing Tuesday morning. The old coating had been dedeteriating over the past few years. For some reason the concrete below has been contaminated over the years from acidic cleaning solutions seeping through the failing areas.

Considering what condition this floor was in when we started it turned out pretty good.

Doing a little Grind & Seal In the Barrel Room at the Bridgeland Distillery. Nothing fancy for this Concrete Protective Coating as this room is only used for storage. They are a local company that makes some fine Whiskey, Brandy & Grappa! I couldn't resist picking up some of their already made Old Fashion Cocktail. Make sure to check them out yourself!

Nothing Fancy. Just a Quick Grind & Seal In This Future Showroom So That This Business Could Open Their Doors Sooner Than Later. The Concrete Was Prepped & A Special Blend of Acrylic & Urethane Was Installed.

Finished up this Floor at 2AM so the contractor could get the drywalling started in the morning. This is a semi-polished heated natural concrete floor that is durable & easy to clean. Hope they don't mess it up.

Polished & Sealed Sample Area. Just Waiting For Customer Approval to Go Ahead & Complete the Showroom Area.

Everyone is enjoying all the work we have. Trying to keep up with lots of Overtime!

When a Polished Concrete Floor is Not in the Budget and Time is of the Essence for this New Startup Business, a Grind & Seal was chosen. No Hole or Crack Repair was done. We installed a Special High Wearing Blended Sealer of Acrylic & Urethane which will more than handle this High Pedestrian Traffic Floor.

Phase 3 - Economical Concrete Floor Rejuvenation in this Wholesale Distribution Warehouse. The contractor wanted a floor that did not emit dust & would repel water.

This concrete was originally poured in 1973 in an area that supposedly used to be a Landfill. There were many cracks and trenches we had to deal with. After the 1st Coating was Installed we noticed some Outgassing Bubbles that gave us some concern. We then installed the 2nd Coating. When we arrived the next morning the Outgassing issue was still there. Only this time the Bubbles were much larger. Unfortunately this floor needed a major Moisture Mitigation System and the coating ending peeling off the floor. We have never encountered this drastic of an issue.

Economical Concrete Floor Rejuvenation in this Distribution Warehouse. The contractor wanted a floor that did not emit dust & would repel water.