Canwin Transformers & Production line
CANWIN is the Advanced One-Stop Solution for Transformers Manufacturer from China.
Why buy equipment? What is the purpose of buying equipment? If there is a device that it can stack after cutting, and it is extremely efficient, why would you buy a separate one?
[China’s first] China’s first 1000mm Bridge Type Automatic Needle Threading and Cutting Line has been successfully developed by CANWIN and is ready for shipment!
Features:
1) The total length is 44 meters, the maximum cutting length is 5000 mm, the maximum cutting width is 1040 mm, and the thinnest can be cut 0.18 mm;
2) The punching and shearing mechanisms are all driven by high-speed and high-response Siemens servo motors, which are simple and convenient to operate;
3) The shearing section has double punching holes, double V-punching, four tip shears, double shearing machines, and a tension pulling mechanism; it uses a large bridge-type needle threading mechanism to achieve precise stacking of columns, and multiple columns can be stacked at the same time. ;
4) This specification is the first one in China, filling the domestic technology gap.
Interested parties are welcome to inquire!
🙋 To know more, click https://www.canwindg.com/
📧[email protected]
💬 WhatsApp +8613702282846
💬 WeChat: 13702282846
CANWIN transformer core cutting machine three major advantages:
1) Shearing efficiency: more than 85 pieces per minute (one hole in the side piece, two holes in the yoke piece, and the length of the piece is about 1.3 meters);
2) With a micro-tension system, it is specially designed for silicon steel with a thickness of 0.18 mm. It can feed materials at high speed without clogging, and the shearing accuracy error is less than 0.1 mm;
3) The upper level can be raised and lowered automatically, and the drum-type electric discharging can be connected to the assembly line or AGV car, which is more convenient and fast!
🙋 Welcome for any inquiry
📧 [email protected]
💬 WhatsApp +8613702282846
💬 WeChat: 13702282846
🔗 https://www.canwindg.com/
CANWIN | Transformer core cutting machine + 2.0 portable transfer
Continuous improvement and improvement, no overhead crane required!
The comprehensive efficiency is increased by more than 30%.
🙋 Welcome for any inquiry
📧 [email protected]
💬 WhatsApp +8613702282846
💬 WeChat: 13702282846
🔗 https://www.canwindg.com/
Happy New Year 2024!
CANWIN | Multiple sets of transformer core cutting machines are being installed with accessories.
Merry Christmas!
A brief discussion on digital factory
We are deeply honored that CANWIN can become the core equipment supplier of digital factories! Recently, many friends are asking, what is a digital factory and what is a smart factory? Here are a few words for reference.
Digital factory is smart factory. As part of smart manufacturing, the development trend of transformer smart factory includes the following aspects:
1. Automated production: With the development of artificial intelligence and automation technology, transformer smart factories will achieve a higher level of automated production, including automated assembly, automated testing and automated quality control.
2. Human-machine collaboration: While automating production, the transformer smart factory will also achieve closer human-machine collaboration, improving workers’ production efficiency and work quality through intelligent production tools and intelligent working environments.
3. Digital production: The transformer smart factory will use big data technology and cloud computing technology to achieve comprehensive digital production. Through the analysis and mining of production data, the production process will be continuously optimized and production efficiency improved.
4. Green manufacturing: The transformer smart factory will adopt more environmentally friendly production processes and materials to achieve green manufacturing and reduce the impact on the environment.
5. Intelligent management: The transformer smart factory will adopt an intelligent management system to achieve comprehensive production management and quality control, improving production efficiency and product quality.
In general, the development trend of transformer smart factories is towards automation, human-machine collaboration, dataization, green manufacturing and intelligent management.
🙋 To know more, click https://www.canwindg.com/
📧[email protected]
💬 WhatsApp +8613702282846
💬 WeChat: 13702282846
Canwin CAH(25)- high-speed cutting machine
Two sets of shears and two sets of V-notch three sets of O-punches, mechanisms are designed in the way of chasing shears, which can move vertically and horizontally, and automatically arrange, easily realize three-synchronous and five-synchronous shearing;
The material handling part adopts the gantry type servo belt mechanism, which can be automatically raised and lowered with the change of the lamination height;
Equipped with an electric stacking trolley, the trolley can move left and right, the upper stacking table can be lifted up and down, and the workshop without a truss trolley can also produce transformer cores!
A four-wheel-drive micro-tension servo pulling mode is added to the shearing section, and materials with different thicknesses of 0.15-0.35 mm do not need to change the shearing parameters!
CANWIN—Is your trusted qualified supplier
Welcome to send inquiry!
To know more, Click https://www.canwindg.com
[email protected]
WhatsApp:+8613702282846
"cutting & stacking all-in-one"(finished cutting=finished stacking)
One-stop closed-loop production reduces costs. you deserve it!
High precision, low loss, high-quality core
We provide a one-stop solution for transformers, supplying finished transformers, transformer core and high-precision automatic production equipment!
We provide our high-end customers with high-end services and high-end products!
CANWIN—Is your trusted qualified supplier
Welcome to place an order
Click https://www.canwindg.com to know more.
[email protected]
WhatsApp:+8613702282846
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Telephone
Website
Address
NO. 1, Pankeng Road, Honghe Town, Heshan, Guangdong, China
Jiangmen
529700
Jiangmen, 529000
How to buy an economical and practical Laser Cutting Machine? Pay attention to me.
9 Huancui West Road, Cuishanhu New Area, Kaiping City
Jiangmen, 529300
excavator boom supplier whatsapp 08618127591702
Jiangmu Road, Muzhou, Xinhui
Jiangmen, 529100
JINGOU is a high-tech enterprise that with forward thinking specially designed, manufactured corrugat
鹤山市共和镇顺和路189号之一
Jiangmen, 529700
This is Singapore CANWIN Company. We focus on the Silicon Steel Sheet CTL, Slitting Line&Transformer
Jiangmen
hot air seam sealing machine,Protective clothing manufacturing machinery,eva tape,Medical protecti
中华人民共和国
Jiangmen, 529000
SYNE CNC Machinery Leading the era of Chinese industry 4.0, Whatsapp: +8613318645391 [email protected]
No. 83, Hebianli, Huangbian Village, Huanshi Street, Pengjiang District, Jiangmen City
Jiangmen, 529000
Hot Air Seam Sealing Machine-Professional Factory Manufacturer-(Nanxiyang Machinery Equipment Co.,
TUIXIA Lane 1. No. 8, LVBU Industrial Area, HETANG Town, PENGJIANG District, JIANGMEN City, P. R. C
Jiangmen, 529000
Jiangmen City SUNNY CNC Machinery Co., Ltd. is a professional manufacturer of CNC lathes. The main p