Marvin and Pinch

Custom corner shower enclosure, incorporating a reduced height wall. Matte black components were used throughout the installation.

Bespoke three panel shower enclosure for this angled roof space. A central door was required due to the sink. All components used had a Chrome finish.

Bespoke shower enclosure, to accommodate a corner tray and sloped ceiling, made up from 4 custom sized glass panels with relevant chrome components used in the installation.

Custom frosted glass doors, one for a recessed shower, the other for the toilet. The wall to glass hinges and door k**b used had a Satin Brass finish.

Custom corner shower enclosure, incorporating two sloped ceilings. Chrome components were used through the installation.

Custom three panel shower glass enclosure, incorporating a sloped ceiling. All components used had a Antique Brass finish.

Custom over bath panel, shaped for the roofline. Compact wall to glass hinges and a traditional style door k**b in a chrome finish.

Bespoke corner shower enclosure; utilising Satin Brass components, for the fixed panel and for the door.

Bespoke three panel shower enclosure. Central door hinged from a shaped panel to accommodate the roofline. The component finished used was a Brushed Nickel.

Traditional style back to back door k**b; commonly used for shower and glass doors. This Satin Brass (often considered Brushed Brass) can be used to compliment a wide range of our bespoke glass shower hardware.

Antique Brass inline glass clamp, for 8mm, 10mm and 12mm thick toughened and safety glass panels and screens. A pre-fabricated drill hole is required in the glass. Contact us now for your bespoke glass and glass hardware requirements.

Antique Brass finish U Channel; suitable for 10mm thick shower glass screens and fixed panels.

Beautiful Brushed Bronze wall to glass hinge, with offset mounting back plate. Suitable for all 8mm, 10mm and 12mm shower glass doors and over bath panels.

Custom inline configuration shower enclosure; wall hung, inward opening door, meeting an inline fixed glass panel. All components used had a Chrome finish.

Bespoke shower enclosure comprising of three panels. Configured to make the most of the space, Chrome fixtures and fittings were used; including a T configuration support bar, inline clamps and U Channels. A threshold was added under the door to work in conjunction with the drip seal on the door.

Custom tinted mirror installation, with added bespoke glass shelving.

Internal glass balustrades, only one photo taken as the rest of the stairs were being carpeted. 10mm low iron glass was used with contrasting matte black D clamps.

Custom attic shower enclosure; comprising of a shaped fixed panel with an inline door hinged from it due to the space requirements. All fixtures had a Chrome finish including the under door threshold to assist in ensuring water is kept where it’s desired.

Bespoke frameless balustrade, secured with baserail and additional glass stiffeners. #

Custom apex roof shower enclosure, comprising of a central door, with shaped side panels. All components used had a matte black finish.

Custom glass door added to this customers existing shower enclosure. Required due to water escaping.

Bespoke shower enclosure, for an offset apex roof. Chrome components were used across the installation, including glass to glass hinges, door k**b, U Channels and inline wall clamps. Perimeter seals are used around the door.

A custom corner shower enclosure, utilising matte black components. The customer requested us to create the ‘frame’ around the large fixed panel. Very intricate work, and truly bespoke. Now the customer can complete the rest of the bathroom and surrounding rooms.

Custom curved saloon style shower doors, used to compete the entrance to this showering space. Wall to glass chrome hinges were used, with simple door k**bs and seals around the door perimeters.

Bespoke corner shower glass solution, two fixed panels with an opening to enter. Chrome components were used in the installation; a T configuration support bar was used to secure both panels to each other and the rear wall.

Custom sloped roof shower enclosure, a wall hung door meeting an inline shaped panel. All components used had a chrome finish. A threshold was added under the door to aid in additional water retention.

Multi sided custom shower enclosure, installed using satin brass components: polished finger pulls to open and the inclusion of vertical support bars.

Custom shower glass door and panel, to partition part of this wet room/bathroom. Chrome components were used in the installation.

Bespoke shower enclosure comprising of two freestanding glass panels, secured with Chrome components. A frosted glass door was also installed to protect the window.

Custom over bath panel solution, installed with Chrome components.