ERS Management LTD

1987 STANKO VV1134,250T Horizontal forging machine

Used 1987 STANKO VV1134,250T Horizontal forging machine for Sale at ERS MANAGEMENT LTD Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset fl**ge: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slid...

NEW ARRIVALS 1962 Kramatorsk 1660G (1250x8000) Heavy duty lathe

Used 1962 Kramatorsk 1660G (1250x8000) Heavy duty lathe for Sale at ERS MANAGEMENT LTD The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the numbe...

2020 ORIENTANKPRESS OPC - 60A Molding press

Used 2020 ORIENTANKPRESS OPC - 60A Molding press for Sale at ERS MANAGEMENT LTD Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die return force max KN 32 Upper punch travel mm 190 Upper punch adj.travel mm 200 Filling height max mm 180 Pressing travel max. mm 90 Withdraw travel max. mm 9...

1981 VEB Schwermaschinenbau UBBDA 60x4500 3-Rolls Plate Bending Machine

Used 1981 VEB Schwermaschinenbau UBBDA 60x4500 3-Rolls Plate Bending Machine for Sale at ERS MANAGEMENT LTD - min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m.

1980 TMP K2538 630 ton Mechanical trimming press

Used 1980 TMP K2538 630 ton Mechanical trimming press for Sale at ERS MANAGEMENT LTD Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider,mm 180 Table size, m...

980 KALININ FACTORY KA3534 250T Two-crank press of single action, closed

Used 1980 KALININ FACTORY KA3534 250T Two-crank press of single action, closed for Sale at ERS MANAGEMENT LTD Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4...

1980 ERFURT PKZZ 250 Double-crank sheet stamping presses

Used 1980 ERFURT PKZZ 250 Double-crank sheet stamping presses for Sale at ERS MANAGEMENT LTD Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction ...

1974 TMP K3540 1000TN Sheet stamping press

Used 1974 TMP K3540 1000TN Sheet stamping press for Sale at ERS MANAGEMENT LTD Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel t...

1980 Waldrich Coburg 17-10 FP 250 CNC (10m) Portal milling machine

Refurbished 1980 Waldrich Coburg 17-10 FP 250 CNC (10m) Portal milling machine for Sale at ERS MANAGEMENT LTD Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. s...

NEW ARRIVALS 1978 Dorst TPA-180 Powder Compacting Press + 2 adaptors

Used 1978 Dorst TPA-180 Powder Compacting Press for Sale at ERS MANAGEMENT LTD Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18...

1981 ERFURT PKZV I 1250 FS Double crank sheet stamping press

Used 1981 ERFURT PKZV I 1250 FS Double crank sheet stamping press for Sale at ERS MANAGEMENT LTD Number of connecting points of the ram: 4 Max. ram force: 1250 tons Slide stroke: 630 mm Slide adjustment: 630 mm Max. shut height between bolster plate and slide (stroke down, adjustment up): 1250 mm Bed area: 4000x2500 mm Slide area: 3950x2500 m...

1985 TMP K4040, 1000T Closed four-crank sheet stamping press

Used 1985 TMP K4040, 1000T Closed four-crank sheet stamping press for Sale at ERS MANAGEMENT LTD Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider ...

1988 ERFURT PKZV III 800/4000 FS Double crank sheet metal stamping press

Used 1988 ERFURT PKZV III 800/4000 FS Double crank sheet metal stamping press for Sale at ERS MANAGEMENT LTD CAPACITY, TON 800 NUMBER OF STROKES PER MINUTE 14 MAX DISTANCE BETWEEN TABLE AND SLIDER, MM 1200 TABLE SIZE, MM 4000 x 2500 TABLE GAP SIZE, MM 3320 x 1540 RAM DIMENSIONS, MM 3950 x 2500 SLIDER STROKE, MM 630 SLIDER ADJUSTMENT, MM 630 TABLE CUSHION...

2008 MG AK350 (3000x50) Plate Bending Machine - 3 Rolls👍

Used 2008 MG AK350 (3000x50) Plate Bending Machine - 3 Rolls for Sale at ERS MANAGEMENT LTD CAPACITY: -Plate width 3000 mm -plate thickness 50 mm -Pre-pinch thickness 40 mm -Minimum rolling dia. 550 mm. CONFIGURATION: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm Machine configuration and ac...

Clutch hub for hot forging press KRAMATORSK K8548 6300T

New stale KRAMATORSK K8548 6300T Clutch hub for hot forging press for Sale at ERS MANAGEMENT LTD Clutch hub for hot forging press K8548 6300T Weight, kg 7100. Weight, kg: 7100.

Driven gear for hot forging press Kramatorsk K8548 6300T

New stale Kramatorsk K8548 6300T Driven gear for hot forging press for Sale at ERS MANAGEMENT LTD Driven gear for hot forging press 6300T Weight, kg 1300. Weight, kg: 1300.

Drive gear for hot forging press Kramatorsk K8548 6300T

New stale Kramatorsk K8548 6300T Drive gear for hot forging press for Sale at ERS MANAGEMENT LTD Drive gear for hot forging press Weight, kg 15 700. Weight, kg: 15 700.

Kramatorsk K8548 6300T Eccentric shaft for hot forging press

New stale Kramatorsk K8548 6300T Eccentric shaft for hot forging press for Sale at ERS MANAGEMENT LTD Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800. Weight, kg: 27 800.

1983 TMP KV2536 400T Trimming press

Used 1983 TMP KV2536 400T Trimming press for Sale at ERS MANAGEMENT LTD Effort , 400T Slider stroke, mm: 250. Frequency of move slider, 1/min: 25. The distance between the table and slider mm,510 Adjustment mm,160 Table, mm: 1000x1000. Power: 43,3 kW. Press overall dimensions mm - length 3470 - width 3140 - height 594...

1961 Barnaul K846B 800TN Knuckle joint press

Used 1961 Barnaul K846B 800TN Knuckle joint press for Sale at ERS MANAGEMENT LTD Pressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 ...

1981 KALININ K3535A,315t Sheet stamping press

Used 1981 KALININ K3535A,315t Sheet stamping press for Sale at ERS MANAGEMENT LTD Capacity (ton): 315, Table size, mm: 2500 x 1250, Slider stroke, mm: 400, Shut height,mm: 750, Strokes per min: 25, Press weight, kg: 50900.

1989 RAFAMET UDA 112N CNC Railway lathe

Refurbished 1989 RAFAMET UDA 112N CNC Railway lathe for Sale at ERS MANAGEMENT LTD modernization 2006 Control system 'Siemens' Max working diameter: 700-1500 mm Distance between railway wheels: 1435 mm Regulating distance between railway wheels: 1524 or 1676 mm Length of railway wheels sets: 1640-3000 mm Jaws clamp diameter: 550...

1985 HECKERT SZ18-12-06/22/1-7 (2000x6000) Slideway Grinding Machine

Used 1985 HECKERT SZ18-12-06/22/1-7 (2000x6000) Slideway Grinding Machine for Sale at ERS MANAGEMENT LTD Length of the grinding (mm) 6000 Width of the grinding (mm) 2000 Height of the grinding (mm) 1250 Weight: 60T Overall dimensions Width 2940 mm Height 5120 mm Length 16640 mm. Weight: 60T.

1985 TMP KV2542,1600T Closed single-crank trimming press

Used 1985 TMP KV2542,1600T Closed single-crank trimming press for Sale at ERS MANAGEMENT LTD Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600...

1988 TMP Voronezh K04 150 242,1600T Closed single-crank press

Used 1988 TMP Voronezh K04 150 242,1600T Closed single-crank press for Sale at ERS MANAGEMENT LTD Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600...