Specialist Components

Might see me build another of these next year, with extra oomph!,

MPI Cooper I’ve just finished, was already running our MPI throttle body kit but needed a bit more oomph! So pulled motor left short block intact as it was super low mileage, swopped the cam for the ACD RT, combined with our 36x31 SuperSport head, 1.3 rockers, sorted a few usual issues out like a really worn primary gear, new clutch, seals gaskets etc, rolling road tuned, so stock block 1275 pulling over 80lb/ft everywhere and 90hp at 6k rpm, perfect 👌

The ClubSport cars bonnet and boot stripes, carbon tape on top of paint? You all know me better than that😆 no, no, next level paintwork is what it is on carbon panels 👌👌all part of the “ultimate” restmod series 😎

Introducing “Project 300” our high power Turbo EFI MGB B engine, time to show what the A-Series big brother can do 🚀🚀🚀New to market parts, full race na/turbo heads, lightweight cranks, cams, early 2025 SC pistons and rods….

🤩😎 SC billet top arms in bubble gum pink anodise 🔥🔥 https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/classic-mini-suspension-components/sc-billet-top-arms.html

Big anniversary for SC next year so time to unleash the ultimate Mini restomod in time for spring ‘25’ and sweep the pretenders into the weeds 🚀🚀. These new cars are available on commission now pm for details

🔥🔥SC full race cylinder head based on the new aftermarket iron 12g style casting. Due to the consistency of this casting and some in built design tweaks in it we’ve been able to push our iron head race porting even further, we’ll offer this casting as an option on SuperSport and full race heads where the car doesn’t require oem castings to be used for class regs. This head utilises “colsibro” material valve guides which are now standard on all SC iron heads-for the ultimate quality heads fast road to full race A Series heads give us a try. https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/5-port-7-port-cylinder-heads/sc-super-sport-5-port-cylinder-head.html

Time to get this hot 8v TwinKam built and dyno’d, 1380cc, fast road grind cams, 11.8:1 comp, fully ported with our inlet adapters for 38mm itb’s (std are 33mm) 🔥🚀🔥for sale post dyno test # twinkam

Our tough crank, wedged/bladed, x-drilled mains, hardened and light forged steel rod sets, ultra durable and reliable combination from fast road to full race, available with 5.75” or 6” centre to centre lengths and 18mm or std 13/16” small ends to suit various engine/piston configurations

Lots of engine projects getting our timing cover backplate this time of year 👍👍 https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/a-series-engine-components/sc-alloy-timing-cover-backplate.html

Now that’s a Good Friday delivery 🔥 I have a waiting list for alloy 5 port and x-flow 7 port heads, if you want to get on the list email please👍https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/5-port-7-port-cylinder-heads.html

A walk around, techy video of our MGB EFI Turbo systems.
https://youtu.be/OXekr3AmwDQ

One our MPI ITB kits assembled ready for despatch on Monday. EFI kits available for cars up to 93, SPI- UK/Euro, JDM 97+ and the MPI

1380cc SC 16v TwinKam just completed this afternoon 🤩 https://www.specialist-components.co.uk/index.php/shop/twinkam-16v-conversion.html

🤩

Not surprising that Steve’s lovely Rio 1380cc TwinKam 16v, 5spd takes cover car on this months edition, grab a copy to have a cuppa with 👍🔥

Hurrah! The new issue is out in shops tomorrow (Friday 13th). You can find your nearest stockist here: https://frontline-group.co.uk/store-finder/
…or order online here: https://shop.kelsey.co.uk/single-issue/miniworld-magazine/2411

One of our MPI based 36x31 SuperSport heads, going into a car I have in for an ACD RT cam swop, 1.3 rockers, and rolling road tune on our MPI EFI kit, video and results soon🔥🔥https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/classic-mini-injection-and-management/rover-mini-mpi-throttle-body-kit.html

Billet 45/40 DCOE full radius ram pipes in all the lengths being created 🔥👌

One of our 5 port race heads, tailored in spec to suit a BIG power turbo motor-all the airflow 🔥🚀🔥🚀https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/5-port-7-port-cylinder-heads.html # aseries

Morris green TwinKams just look great 🤩🤩 they might look similar but the specs are wildly different 🚀 👌

TwinKam low line billet cam covers back in stock and ready to anodise any colour you wish👍 https://www.specialist-components.co.uk/index.php/shop/twinkam-16v-conversion/accessories/twin-kam-low-line-cam-cover.html

A photo from earlier in the summer when these two SC EFI converted stunners were with us🤩 https://www.specialist-components.co.uk/index.php/shop/classic-mini-performance-parts/classic-mini-injection-and-management/a-series-5-port-throttle-body-kit.html