Waterjet Services

This week, we are thrilled to announce that Waterjet Services has received an order for a Hypertherm DynaMax5 50hp intensifier from our valued and loyal customer, Acoustafoam. This addition will complement their existing 2 Hypertherm intensifiers. Thank you for choosing Waterjet Services for your needs!
Hypertherm Associates

Just in and will be available shortly after a full refurb, we have 2 x FLOW 7X, 55k intensifiers. Both have around 10,000 hours.

For further information please contact us directly.

Also available is a KMT SL-V50+. Fully serviced and ready to go.

Does your current waterjet supplier just offer replacement parts or do they offer technical support too?

Here at Waterjet Services we offer both these services.

We are the UK's leading supplier of Hypertherm/Accustream aftermarket parts and service.

Want to see what we can offer?

https://www.waterjetservices.co.uk/replacement-parts

Replacement Parts

This customer liked his Calypso waterjet so much, he bought a second one. A busy week moving the original machine and installing the second.
If you want to increase your production like this customer we have a fantastic refurbished Calypso waterjet and KMT SL-V50+ available.

Available for immediate delivery is this very clean KMT SL-V50+. 15,000 hours. Just been serviced. Air over oil cooler. Can be seen running at out facililty in West Yorkshire. For further details please contact us.

We have available this refurbished Calypso EH320 complete with KMT SL-V50+ intensifier.
Originally installed from new by our engineer and comes with full service history.
This machine has been fully stripped, painted and rebuilt.
New cutting heads, new abrasive feed hoppers, all new bearings, new Z axis lead screws, all new bed slats.
Can be seen running at our facility in West Yorkshire.

Hypertherms replacement Major Maintenance Kit for a FLOW Hyplex going out the door today. For any FLOW Hyplex or KMT Triline parts, contact us today.

It's been a new pipework day today.
High pressure 1/4" pipework made on site to replace a damaged section.

After the previous service provider failed to diagnose the problem with this Hypertherm intensifier after months of trying, the customer contacted Waterjet Services . Within 15 minutes of arrival the fault was diagnosed and the part fixed. For the best Hypertherm waterjet service, spares and sales, contact Waterjet Services.

A 30+ year old Bystronic Byjet running a KMT SL-IV 50 recently installed to a local customer. This came from a company where maintenance was second to none.

When 1 KMT intensifier just isn't enough, get a 2nd one !

A pair of KMT Neolines on Prussiani Cut & Jet machines, recently serviced by Waterjet Services using quality Hypertherm parts.

For KMT parts and service, get in touch to see how we can help you save money today.

We have available a twin head Wardjet ZX-2543, complete with abrasive removal system, bulk feed hopper and Hypertherm 100hp intensifier.
This was installed new by our engineer and has been serviced regularly. Further information please contact us.

A productive couple of days servicing & training on this unique waterjet system for a supplier to the oil & gas industry.

The signs are up and we are in. We are pleased to announce that Waterjet Services have moved into our own unit as of 1st October. Call in for a brew and a catch up at Unit 8 Thackley Court, Thackley Old Road, Shipley, BD18 1BW.

What a beautiful poem for our Queen. Very sad day. Rest in peace 💔


Phillip came to me today,
and said it was time to go.
I looked at him and smiled,
as i whispered that "I know"

I then turned and looked behind me,
and saw I was asleep.
All my Family were around me,
and I could hear them weep.

I gently touched each shoulder,
with Phillip by my side.
Then I turned away and walked,
with My Angel guide.

Phillip held my hand,
as he lead the way,
to a world where King's and Queens,
are Monarch's every day.

I was given a crown to wear
or a Halo known by some.
The difference is up here,
they are worn by everyone.

I felt a sense of peace,
my reign had seen its end.
70 years I had served my Country,
as the peoples friend.

Thank you for the years,
for all your time and love.
Now I am one of two again,
in our Palace up above.

Direct replacement abrasive feeders are now available for your Calypso Waterjet. These feature a bigger top chamber and better watertight covers from the originals. A great upgrade for your machine.

We have available this very clean, well maintained KMT SL-V50+. This has the new touch screen control panel, SHIP sealing heads
Air over oil cooler included. For more information and pricing contact us. Located in UK

A big thanks to Jetcut, Scotland for the purchase of this Calypso EH320 & KMT SL-V50 from Waterjet Services. This is their 3rd waterjet and 2nd Calypso, having been the 1st in the UK to have one and both installed by Waterjet Services engineer.
Thanks for the continued support 👍

Ireland today servicing this KMT Neoline 40i on a Prussiani waterjet for a new contact. Serviced using replacement parts.

Now you see it, now you don't !
KMT 100hp motor removed today for a rewind. Whilst it's away been repaired a good clean is needed here.

Out with the old, in with the new.

Out with the old and in with the new. Another 2 new Windows 10 PC's installed on Calypso Waterjets to replace 14 year old Windows XP PC's. If you're still running XP on these machines contact us to arrange your upgrade today.

Not only is Dean Harrison one of the fastest road racers in the world and 2019 Isle of Man TT winner, he is also a fantastic engineer. Working together we have come up with direct replacement pinnions for Calypso Waterjet systems.

It's always nice to receive positive feedback from customers regarding our spares. Over 200,000 on/offs from the standard needle and seat and still no drips.

3 New PC's for this one customer to replace out dated Windows XP operating systems. The new software works on USB dongles rather than the outdated license keys. Contact us to upgrade yours.

A before and after picture of a Hypertherm 150hp oil tank and filters.

Our new range of British made Leadscrews and Supernuts fitted this week to replace very worn out originals. These originals were done just in time before they failed.

A before and after picture of new cat track to replace old sagging cat track.

A recent service and Renishaw ballbar calibration on this Calypso waterjet and KMT SL-V60 at a gasket manufacturer.
This is something we carry out every year after a previous waterjet service provider failed to adhere to the companies Health & Safety policies.