SUP Services

Most of all the damaged fin boxes I see are lateral breaks.. i.e. sideways pressure on the fin

So here are a few tips to protect your board.

✅️ If you're at the beach, dig a hole for your fin. So the board can lie flat safely.
Or remove the fin..

✅️ On harder ground, remove the fin or place your board fin up.

✅️ Always ensure the water is deep enough to launch before placing weight on your board.

But if the worst does happen, get in touch, and we'll get it fixed and back on the water.

Supservices.co.uk
[email protected]

OK.. maybe one more patch and more glue will work..!

NOPE..! 🤦🏻

Seam leaks occur due to the inner band of the board separating. By patching the area, you are simply masking the problem and actually making it worse.

If you want help with a repair, we are happy to guide you through it.

* For reference, our patch was applied after the rebuild to protect the weekend pvc caused by the damage in the "self repair."

Supservices.co.uk

It's like it never happened..!

Getting the repair to look good is a consequence and benefit of time, patience, and acquired skills.

Meticulous attention detail happens in every aspect, from initial inspection to the final pressure testing.

Need support or advice with your board?

Supservices.co.uk.

Using poor adhesives and poor processes will give you poor results.

At SUP Service, we only use the very best materials with the tried and tested processes to provide the very best result.

Need any help, support, or advice.. Supservices.co.uk

Well that looks a little better 😎.

Doesn't matter how many patches and how much glue you use. With seam leaks, it requires a reconstruction, so patches just won't do the job.

I'm really happy to clean this board up, fix the leak, and get it back looking a lot better.

If you have or are struggling with a self repair, get in touch, and we are happy to do the work for you.

Supservices.co.uk

This Red handle needed a bit of care and reattaching after a few years of abuse, heat, and salt water.

Some careful deck pad work, and we've got it reattached and stronger than ever.

Any issues, big or small, we're here to keep you and your board on the water.

Supservices.co.uk

No fins to new fins..
I'm pretty sure the customer will find the paddling a bit easier now that they can go in a straight line 😎.

We can replace like-for-like or have many options to upgrade your fin setup.

Need some help or advice

[email protected]
Supservices.co.uk

Beautifully clean seam repair for this ageing starboard. 😎

Single band boards aren't easy to repair as there's no room for error. There's no backup like double skinned boards.
Luckily though, I've done one or two before 😜

Any issues with your board or need advice and guidance..

Supservices.co.uk

Perfect OEM fin box replacement on this Stinger.

It is great to have the support of so many brands, which allows us to get factory items, to keep your boards looks like new.

Supservices.co.uk

Covering the board in glue won't fix a leak/puncture.

Whilst we love an invisible repair, when we do use patches, we keep it neat, tidy, and keep the atheistics of the board.

All our patch work is guaranteed to last so you can paddle worry free.

Supservices.co.uk

Trouble with your seams? Don't let it ruin the start of your summer adventures.

We can repair and get your board back to its best.
All our seam repairs are throughly tested to ensure the board is safe for the water.

Need some help?
Get in touch with the UKs leading inflatable paddle board repair specialist.

www.supservices.co.uk

Fair to say the customer attempt at fixing their valve didn't go well..🤦🏻.

So after removing all the pieces and rebuilding the area, I was able to get it all back like nothing had happened and ready for more adventures. 👍🏼

Should you want any advice on self repair, I'm here to answer your questions.
It's better to ask, then make a mistake that's costs you more money.

[email protected]

So much of this repair is under the surface.
Tearing of PVC is actually quite rare given the tensile properties and will often be caused by an external influence.

Really enjoyed the reconstruction, and I am thrilled we can return the board back to be used again for many more adventures.

Supservices.co.uk

Aesthetics vs. Quality

The look of a board is important to the owners, so when damage happens, I will always try to keep the board looking it's best.
HOWEVER... Safety and quality will always come first. The important thing for me is that the board will be safe for you on the water.

Over the years, I have learnt how to achieve the highest standards for quality whilst keeping your boards looking their best.

I pride myself on being the best I can be and offer a service unlike anything else.

Supservices.co.uk

Nice OEM box replacement to keep the board looking factory new.

We work with lots of brands to ensure we have the right parts for your board when you need them.

Supservices.co.uk

Superglue, gorilla glue, stormsure, and even bathroom sealant.
Fair to say the customer tried everything to seal this themselves!

However, the seam underneath has completely ruptured. So after a lot of cleaning and rebuilding, I've been able to remove all evidence of a repair.😎

Supservices.co.uk

Another hungry mouse took a liking to the floor in this kayak.🤦🏻

This took a bit of a rebuilt and some lateral thinking due to the thickness and curvature of the floor, but thrilled with the result, and it's ready for more watery adventures.

[email protected]

Someone got a little happy with the heat gun during a self repair, which melted the board, compromised the dropstitch layer, and caused multiple leaks.

But a call to us, and a little bit of work later, and the board is leak free and looking pretty good. 👍🏼

Whilst I am happy to encourage self repair, please seek advice from me before you start. Whilst something may appear simple, there are lots if things that can go wrong and end up costing you money.

Advice and support is always available at [email protected]

Just needed a careful touch to get it looking perfect again. 😎

It can be a bit unsightly when the deck pad starts to lift. Also, they're a bit temperamental when it comes to reacting with adhesive.. Luckily, I've been around long enough, and I've done enough repairs to know what works and what doesn't.. Well, for a lasing repair anyway 😉

As always, need help with your board.. Supservices.co.uk

Even the smallest jobs require attention and focus. Whether replacing a D-ring or a complex seam rupture, each job gets the quality it deserves.

Summer is coming... Is your board ready?

Supservices.co.uk

Needed to make a couple of incisions for the perfect result.
This board and a fleet of 9 others all needed new handles and reinforced foot plates due to the high volume of self-resuce use. (Hire boards)

Increasing the size of the foot plate helps to spread the force applied to the handle. Then, by using a handle with a stronger and tighter weave.. mission complete. 👍🏼

*handles are not designed to withstand the repetitive lateral force applied from self rescues. They are designed, for the most part, to support the boards weight when being carried.
So if yours breaks, remember it's not the board/brands fault..

Need support with your board

Supservices.co.uk

Simple but effective front cargo install for this customer. Allowing them to take more on their journeys and distribute the weight more evenly.

Do you want more storage?
We can install what you need to blend with with the aesthetic of the board or even something a little brighter. 😎

Supservices.co.uk

Oh yeah, we clean boards too. 😎.

We have a detailing option for your board that essentially will get your board looking the best it can.

Works Package
✅️Full 2 stage bio clean
✅️UV protection wax
✅️Full pressure and integrity test
✅️Full valve service

So not only will it look its best, you can be sure the board is in the best condition, air tight, protected, and ready for paddling adventures. 😎

Supservices.co.uk

Aesthetics vs. Quality

The look of a board is important to the owners, so when damage happens, we will always try to keep the board looking it's best.
HOWEVER... Safety and quality will always come first. The important thing for us is the board will be safe for you on the water.

Over the years, we have learnt how to achieve the highest standards for quality whilst keeping your boards looking their best.

We pride ourselves on being the best we can be and offer a service unlike anything else.

Supservices.co.uk

Sometimes, it's more than just a break.. for this fin box replacement, I needed to craft a new PVC skirt as the old was too damaged to reuse.

Overall, I'm pretty happy with the result.. clean, tidy, and more importantly, ready for the water.

Supservices.co.uk

Clean little seam rupture, all fixed, tested, and ready for the water again.

I pride myself on proving the highest quality of repair. So if you need support and advice for your board or repair.. give us a message at Supservices.co.uk

Supservices.co.uk

Be honest. When was the last time you cleaned or serviced your valve..?

It's a main component of your board, and dirt and grit can build up underneath, causing air leaks.

Within your repair kit, you will or at least should have a valve spanner.

So, How to do it..
1) Deflate your board..
2) Use the valve spanner in an anti-clockise direction
3) Remove the upper valve * Do not try to remove the lower section
4) Clean the valve seat on the board
5) Clean the valve and seals, remove any deposits
6) Make sure the plunger operates smoothly and doesn't stay open.
7) Reinsert your valve and hand tighten in a clockwise direction. You may need to use downward pressure if the lower half starts to spin.
8) Use the valve spanner for the last few turns to make it tight..

Supservices.co.uk

Nice new triple fin replacement/install to end the week.

It took a bit of cleaning to remove the old adhesive, but looking clean and Sharpe now. 😎

Supservices.co.uk

I'm starting off the week with a little deck pad repair.

Bit of a change from all the handles, seams, and fin boxes completely lately.

Here at SUP Services, there aren't many jobs that's get turned away.. if any..
We pride ourselves in being experts in the services we provide, ensuring your board is in the best possible hands.

Supservices.co.uk