JSP Safety

THATS A WRAP🙌🎉

We've had a great 2 days at the Resource & Waste Management Expo. Thank you to everyone who stopped by and met the team.

Contact us: https://jspsafety.info/47t3gv5

DAY 1 AT RWM 2024! 🌟🎉

Steve Sheridan and Trevor Craven are ready for day 1 at the Resource & Waste Management Expo. Come and visit us on stand RS-G99 where you can meet the team and discover the latest innovations in PPE.

WORLD SU***DE PREVENTION DAY

The construction industry is facing a mental health crisis. Construction workers are statistically less than half as likely to suffer from work related stress, depression or anxiety than the working population as a whole. But they are four times more likely to take their own lives.

We need to encourage open communication, recognise the signs, provide access to resources, promote work-life balance, and support each other. So that we can create a safer, more supportive environment and help prevent su***de in our industry. Remember, su***de IS preventable, NOT inevitable.

Click here for support resources: https://jspsafety.info/3XiIQQQ

The Moulded Disposable Mask 532 is a moulded disposable valved respirator with 360° comfort foam surround, and four point adjustable harness.

✔️ EXHALATION VALVE
✔️ FOAM PADDED NOSE BRIDGE
✔️ 4-POINT ADJUSTABLE STRAPS

View the product: https://jspsafety.info/3z3sXpm

HSE inspections will focus on workplace noise in 2024-25. On-site noise control and hearing protection will be reviewed, ensuring effective control measures are in place to protect workers.

Companies are required to show that they have assessed the risks and selected appropriate tools, equipment and hearing protection to reduce noise to a safe level.

When using hearing protection at work, think CUFF:

• C – Condition. Is the hearing protection in good condition?
• U – Use. Are workers using hearing protection when it is needed?
• F – Fit the ear. Is the hearing protection fitted properly?
• F – Fit for purpose. Has the hearing protection been correctly specified?

For more information on noise control measures visit:
https://jspsafety.info/4ego3El
https://jspsafety.info/3ZgqJ0s

📢LAST CHANCE TO REGISTER📢

Join us tomorrow for a sharp edge safety webinar! Our height safety expert Jamie Appleton will be increasing attendees awareness about sharp edge and horizontal safety when working at height.

SECURE YOUR SPOT NOW: https://jspsafety.info/3Z4LzQh

JSP is aanwezig op de Safety & Health at Work beurs in Ahoy Rotterdam!

Bezoek ons op onze stand en ontdek de nieuwste innovaties op het gebied van boven-de-schouder PBM’s.

Of je nu op zoek bent naar nieuwe oplossingen of gewoon even wilt bijpraten, we verwelkomen je graag!

📅 Wanneer: 2 & 3 oktober 2024
📍 Waar: Ahoy Rotterdam,
Stand: 4.401

Hopelijk tot dan!

Engineered to maximise compatibility and accessory integration, EVO® ALTA™ is an adaptive system with built-in attachment points, an interchangeable front module and a selection of 4-point chinstraps for use in a wide range of applications.

✔ COMPATIBILITY & ACCESSORIES
✔ ALL-ROUND PROTECTION
✔ EPP LINER
✔ 4-POINT CHIN STRAP

View the EVO® ALTA™: https://lnkd.in/e4KMrj-F

Eurosafe distributors: http://ow.ly/nBwq50FrsOE

JSP Safety is a supply partner of Eurosafe.

❗1 WEEK TO GO❗

We are excited to be at the Resource & Waste Management Expo next week. Come and visit us on stand RS-G99 where you can meet the team and discover the latest innovations in PPE.

We look forward to seeing you there!

GET YOUR FREE PASS: https://jspsafety.info/3yYDYbo.

📢JOIN US FOR OUR FIRST JSP SAFETY CAST! 🎥

Join our height safety expert Jamie Appleton for a sharp edge training webinar! This quick 30 minute safety cast aims to increase attendees awareness about sharp edge and horizontal safety when working at height, this will include what working at height equipment can and can't be used over an edge and the differences between a standard fall arrest block and a horizontal fall arrest block.

REGISTER NOW: https://jspsafety.info/3Xq6z1N

We are exhibiting at RWM 2024! 🌟🎉

We are excited to announce that we will be at the Resource & Waste Management Expo on the 11th-12th September. Come and visit us on stand RS-G99 where you can meet the team and discover the latest innovations in PPE.

We look forward to seeing you there!

GET YOUR FREE PASS: https://jspsafety.info/3T7YJIu.

NO NEED TO FACE FIT TEST👷

A fully integrated TH3 powered air respirator offering 4 of the highest levels of protection in one intuitive head mounted unit. Giving the wearer complete above the neck 4 in 1 protection. PowerCap® Infinity®, the perfect choice for many industries where dust poses a great danger to health.

PowerCap® Infinity® removes the need for fit testing, ensuring that a high volume of clean air is delivered to the breathing zone to provide a high level of protection.

View the PowerCap® Infinity®: https://jspsafety.info/3WJzr4B
Have a question for the team?: https://jspsafety.info/4cqq13M

The Martcare® range offers a cost-effective solution, with a straightforward selection of easy-to-use PPE, subject to the rigorous batch testing and conformity procedures applicable to the entire JSP PPE range.

✔️Exhalation Valve
Low resistance exhalation valve for easy breathing

✔️Metal Free Straps
Mask straps ultrasonically welded ensuring no metal parts in contact with the face

✔️Inner Foam Nose Bridge
A foam area around the nose area of the mask provides comfort and a firmer fit.

Find out more: https://jspsafety.info/3YKQLsE

📢❗SHARP EDGE SAFETY WEBINAR

Join us on Tuesday 10th September at 11am for a sharp edge safety webinar! Our height safety expert Jamie Appleton will be increasing attendees awareness about sharp edge and horizontal safety when working at height.

GRAB YOUR SPOT NOW: https://jspsafety.info/4dMbZub

❗📢 UK doctors are raising awareness of the increased risk of silicosis arising from engineered stone exposure and urging the government to ban the material. A new report(1) details the first eight cases in the UK, all of which involved workers dry cutting and polishing worktops with inadequate safety measures.

Engineered stone can contain substantially more silica than natural stone – over 90%, compared with less than 45% in granite.

The UK/EU exposure limit for silica is 0.1mg/m3 over an 8-hour period, but it is important to remember that there is no ‘safe’ limit – inhaling any amount of silica dust is harmful.

Exposure must be reduced as much as possible through effective engineering controls and work practices:

- Use wet methods to cut and work materials.
- Install extraction or ventilation equipment.
- Use on-tool dust suppression.
- When cleaning up, use wet sweeping methods or HEPA-filtered vacuums.
- Do not use compressed air to clean clothing or surfaces.

When selecting respiratory protective equipment (RPE) consider:

- Protection level – Must offer a UK Assigned Protection Factor of at least 20.
- Filter efficiency – Must have a high-efficiency particulate filter, e.g. P3.
- Fit testing – Every tight-fitting RPE wearer must be fit tested.
- Facial hair – Tight-fitting RPE wearers must be clean-shaven in the area of the face seal.
- Loose-fitting – Loose-fitting PAPRs do not require fit testing and can be suitable for use with facial hair.

The dangers of silica dust: https://jspsafety.info/3YC27yV
(1) https://jspsafety.info/3WWxl2K

❗Face size and shape are important considerations when selecting RPE. The mask must fit the wearer’s facial features to create a seal and provide protection.

Respirators are available in a range of sizes to fit different facial dimensions. To ensure a good fit, face shape and size must be considered and, if possible, measured prior to selection.

📏Force® Size Guide is available to measure facial dimensions in order to check whether a Small (S), Medium (M), or Large (L) mask would provide the best fit.

CLICK HERE TO REQUEST YOUR FREE FORCE® SIZE GUIDE: https://jspsafety.info/3ymJjZN

What is the difference between EN 397 and EN 12492 chinstraps? 👷‍♂️

EN 397 – Industrial Safety Helmets

Chinstraps are optional for EN 397 helmets. 2-, 3- and 4-point chinstraps can be supplied pre-fitted to the helmet or purchased as an accessory to be fitted by the user, however this is not a mandatory requirement.

Optional chinstraps for industrial safety helmets must release under a force of 150 – 250N if caught up creating danger for the user. This reduces the risk of injury in case the strap becomes snagged on machinery in an industrial environment.

EN 12492 – Helmets for Mountaineers

Chinstraps are mandatory for EN 12492 helmets, forming an integral part of the retention system. All helmets meeting the mountaineering standard are supplied with a chinstrap fitted.

The retention system is tested to ensure the strap does not break or stretch when a force of 500N is applied. There are also some test requirements to ensure that the helmet cannot roll off the head if caught at the front or the rear. This maximises protection during a fall, helping to keep the helmet secure in case of repeated impacts from swinging or multiple falling objects.

Have a question for the team?: https://jspsafety.info/4cOefkx
View the EVO® ALTA™ range: https://jspsafety.info/4f5fnSu

EVO® NECK CAPE ULTIMATE SUN PROTECTOR☀️🔥

The EVO® Neck Cape provides complete neck and ear UPF 50+ protection, and offers full compatibility with EVO® safety helmets and Sonis® mounted ear defenders. The neck cape is made with lightweight materials and specially designed to provide maximum air ventilation.

Find out more: https://jspsafety.info/4d4I94k

DUST KILLS! - DUST AWARENESS WEBINAR🖥️

Join our “Dust Kills!” webinar to learn about the dangers posed by dust and how to select appropriate respiratory protective equipment (RPE). Gain an understanding of the health risks associated with dust in the workplace, different types of respirators, and the importance of fit testing.

Our expert speakers, Matthew Judson, Quality Director, and David Hampson, UK Key Account Manager, will provide valuable insight into construction dust hazards, giving you the tools to implement an effective RPE programme.

REGISTER HERE: https://jspsafety.info/3YeUVIP

In an increasing number of countries, it is a legal requirement that workers using tight fitting respiratory protective equipment (face pieces/masks) must be fit tested by a competent person.

JSP can help support you with respirator face fitting and face fit testing in a number of ways. From testing to training, we are able to provide a host of solutions to ensure JSP RPE wearers can achieve a good fit and undergo fit testing safely.

We are proud to provide international support with our team of Fit2Fit accredited members of staff. Find your nearest support representative: https://jspsafety.info/3WBfRsv

What is the difference between EN 397 and EN 12492 chinstraps? 👷‍♂️

EN 397 – Industrial Safety Helmets

Chinstraps are optional for EN 397 helmets. 2-, 3- and 4-point chinstraps can be supplied pre-fitted to the helmet or purchased as an accessory to be fitted by the user, however this is not a mandatory requirement.

Optional chinstraps for industrial safety helmets must release under a force of 150 – 250N if caught up creating danger for the user. This reduces the risk of injury in case the strap becomes snagged on machinery in an industrial environment.

EN 12492 – Helmets for Mountaineers

Chinstraps are mandatory for EN 12492 helmets, forming an integral part of the retention system. All helmets meeting the mountaineering standard are supplied with a chinstrap fitted.

The retention system is tested to ensure the strap does not break or stretch when a force of 500N is applied. There are also some test requirements to ensure that the helmet cannot roll off the head if caught at the front or the rear. This maximises protection during a fall, helping to keep the helmet secure in case of repeated impacts from swinging or multiple falling objects.

View the EVO® ALTA™ range: https://jspsafety.info/4dtSXZN
Have a question for the team?: https://jspsafety.info/4d8xt4i

Farm Safety Week 🚜

Farming remains one of our country’s most hazardous industries; accounting for 1% of workers but 18% of all worker fatalities (HSE). This week is led by the farm safety foundation.

Ensure you are protected in farming environments with the Powercap® Active™. Firm-fitting and ergonomically designed, the Powercap® Active™ is designed to protect the user from dust and other airborne particulate pollutants to EN 12941 TH1P.

Find out more about the Farm Safety Foundation: https://jspsafety.info/3Wu1tCe
View the Powercap® Active™: https://jspsafety.info/4ffMgvI