Trustseal Limited

Working on a roundabout approach in Chesterfield using Keygrip Thermoplastic High Friction Surfacing

A recent car park marking job we completed for Auto Windscreens at their HQ in Chesterfield. The H&S team were happy with the improved visibility around the site with the crossings and walkways that were installed.

A hot applied Keygrip Thermoplastic High Friction Surfacing installation carried out in Brigg, North Lincolnshire last weekend.

These new build homes near Ipswich give a great example of our resin bonded driveways using our Keygrip Epoxy Resin binder and a Brittany Bronze aggregate.

If you are a home builder and are looking for a cost effective and visually appealing solution for the driveways please don’t hesitate to give us a call on 01909 722 662 or email on [email protected].

A resin bonded job we did in Blackburn last week using corn flint aggregate, lots of tape due to the existing pattern but the end result looked 👌

We went to Trinity Academy in Wakefield prior to the academic year and brightened up their vehicle and pedestrian access routes for the upcoming school year…….

800m2 of decorative surfacing completed in Bognor Regis last week…..

800m2 of Keygrip Thermoplastic High Friction Surfacing plus road markings all completed by our crews working in tandem today at Oakerthorpe, Derbyshire.

If you have any antiskid or road marking requirements please don’t hesitate to get in touch with us on 01909 722662 or [email protected].

An MMA high friction surfacing installation completed today in Enfield, London…..

It was great to be asked by Ashgate Hospice to install this rainbow crossing outside their main entrance today. Thanks to Geveko Markings for the preformed thermoplastic materials and support onsite. We hope that the visitors to the hospice are happy with the end result

A productive night and day in the South for one of our Thermoplastic anti skid crews, the High Friction Surfacing installation on the left was done on the M1 (near the M25) last night and the crossing on the right in Bexley today (road markings by others).

Keygrip Thermoplastic high friction surfacing installation completed tonight in Bath by one of our crews

Southampton port last week, Keygrip epoxy high friction surfacing

Here’s a Keygrip Thermoplastic High Friction Surfacing installation completed in Dewsbury this evening by one of our anti skid crews

We’ve been working on this 6,000 sqm installation in Doncaster this week using Keygrip Thermoplastic High Friction Surfacing in both Grey and Red.

Here’s a job we’ve done today at the Olympic Park in Sheffield. Autumn Quartz aggregate on an epoxy resin binder for a great aesthetic and hard wearing solution. Contact us on 01909 722662 or [email protected] for details.

Great to see our High Friction Surfacing and Road Marking Services crews working together to complete this project on Connect2 in Scunthorpe.

Even more satisfying is that we have an apprentice on each crew learning the ropes alongside an experienced foreman.

https://www.trustseal.co.uk/post/trustseal-at-eton-college

Read our blog about some work we did at Eton College last week.

Trustseal at Eton College We were delighted to be chosen to install just under 2,000 m2 of decorative surfacing on pathways leading to the new swimming pool at Eton College last week using a Keygrip Epoxy Resin as a binder and dressed with Brittany Bronze aggregate. Given some of the famous Eton alumni we're sure that the in...

Lots of tape needed on this Keygrip Epoxy Anti Skid job in Canterbury last week. Our cold poured high friction surfacing products can be laid around existing road markings with a lot of tape and patience!

More night works completed in Ashford, Kent this week. Our Keygrip Epoxy High Friction Surface binder was dressed with grey bauxite before being swept

A job recently completed in Reading using Keygrip Epoxy High Friction Surfacing and dyed red Chinese bauxite

Nearing the end of this 4,500m2 Keygrip Epoxy High Friction Surfacing installation on the A92 near Aberdeen. We’re well ahead of schedule and the crew will be back down South with time to spare!

300m2 of Thermoplastic High Friction Surfacing (anti skid) installed recently in Liverpool…….

A job completed yesterday in Nottingham using MMA paint for the surfacing and thermoplastic paint for the markings…..

We completed this decorative surfacing project over the weekend in Oldham, gives the footpath a visual lift

We completed this Keygrip Thermoplastic High Friction Surfacing installation recently in Birmingham City Centre with the added challenge of the tramlines to contend with……

An MMA High Friction Surfacing job completed yesterday in Salford. Chinese buff bauxite used to create this striking approach. Give us a call on 01909 722662 or email [email protected] for more information on our products and services

This high friction surfacing job was completed in Doncaster last Sunday when the rest of the local area was under snow!

A nice and bright roundabout approach using buff coloured Keygrip thermoplastic high friction surfacing as a safety measure.

Easy to lay at this time of year with the hot applied solution going off pretty much instantly upon application to the surface.

We were around the corner in Cuckney yesterday carrying out both Road Markings and High Friction Surfacing installations.

We had a crew in Aylesbury yesterday morning completing this Keygrip Thermoplastic High Friction Surfacing installation. Great work as ever by Gareth and Nick 👍