Waiguard Systems Limited

Datacentres provide a number of challenges in ensuring full and consistent fire detection cover.

How do you keep operations running 24/7, when unexpected problems can have serious consequences?

The causes of fire in datacentres can be diverse, with challenges including rodents biting through wires, lightning strikes, overheating and electrical faults. To add to this, datacentres have many fuel sources such as plastics, circuit boards and conductor insulation. Also, to complicate matters, datacentres and server rooms can have very high air flows resulting in smoke being moved away from point detectors, so that it can be difficult to reach the smoke levels required to generate an alarm.

Primary sampling of the HVAC air can provide very early warning in business-critical applications and the cumulative effect of multiple sampling points combined with the very high sensitivity of ModuLaser makes effective secondary detection possible. In addition, where under floor detection is required, this is simple to install due to the ability to invert the detector module using ModuLaser.

FyreLine Linear Heat Detection offers a superior solution for safeguarding multi-storey and underground car parks from fire hazards. Unlike traditional point detectors, FyreLine utilises heat sensing cable strategically installed along the ceiling. This cable detects temperature increases throughout its entire length, ensuring comprehensive fire coverage.

㊗️大家 龍年 新年快樂
瑞龍🐉 呈祥 🎉🎉
身體健康 💪🎊

Airsense – Stratos Aspirating Smoke Detection

Airsense – Stratos ModuLaser – A Natural Choice For Harsh Environments

The ability of Aspirating Smoke Detectors to differentiate between smoke and dust varies. This compromises a detector's performance in dirty or harsh environments

Stratos ModuLaser's Laser Dust Discrimination functionality enables the ASD to clearly differentiate between dust and smoke, making it the natural choice for dusty environments such as waste recycling plants.

detection

賞花🪷 賞月🌕 賞秋香🥮。祝 大家中秋佳節快樂。

FyreLine “EN54” Fixed Linear Heat Detection Cable is a non-resettable linear heat detection cable available with a rated temperature of either 78°C or 88°C.

The cable’s outer coating is “low smoke zero halogen” which vastly reduces the amount of toxic and corrosive gases released during combustion. It also releases less optically dense smoke, making exiting a space easier and safer for occupants and increases the safety of firefighting operations.

The cable’s protective outer coating is also UV stable, hydrocarbon resistant, oil resistant and flame retardant making it suitable for almost any application.

Did you know that one of the best ways to protect atriums is to use . Quick and easy, as well as being sympathetic to the design and aesthetics, without compromising on speed and accuracy of detection.

can be located where you need it, reducing pipe runs and therefore cost.

From one to many.... Did you know ? can be integrated into any system, from a single detector, to an entire network. Fully backwards compatible with range, the latest will communicate across the same network seamlessly.

兔年大吉，新春快樂。

Suitable Fire Detection for Car Parks

Fyreline Linear heat detection offers the perfect solution for protecting both above ground and underground multi-storey car parks from fire. Linear heat detectors use Heat Sensing cables to detect rises in temperature. This means it is not affected by airflow or contaminants in the air and can provide fast and reliable detection for this type of application.

Do You Need A Fire System That Is Easy To Maintain? Think Airsense - Modulaser !

Maintenance of large fire detection systems can be difficult and time consuming, especially if systems are in dangerous, restricted, or hard to access areas. However, with Modulaser, things become a lot easier.

Modulaser systems can be designed so that the detectors themselves can be grouped in one place and/or positioned outside the detection area in a safe and easy to access area. Maintenance is supported by a maintenance wizard and is also made easier by the facility to directly replace the detector or display modules. Altogether, this makes maintenance quick and easy.

How Can You Reliably Detect Fire In Harsh Environments ? Modulaser Can Help !

Modulaser is an Aspirating Smoke Detector that is able to cover large areas, as well as detect fire at a very early stage, even in harsh conditions with high levels of dust, humidity or cold. This makes Modulaser a far better solution for extreme conditions or covert operation compared to point detectors.

For the ultimate in Early smoke Detection, ModuLaser is the latest innovation in aspirating smoke detection, saving both time and money.

The Sense-WARE UV, UV/IR, IR3 Flame Detector are designed to give optimum performance for Zone 2 and Safe Area indoor flame detection. Designed to detect all types of hydrocarbon fires and Hydrogen fires and immune to false alarms, offers a cost effective solution for Zone 2 and Safe Area and commercial applications.

GDS TECHNOLOGIES is a Leading Manufacturer of Gas monitoring and Gas Detection systems, in which has done for over 30 years. The gas detection systems are primarily designed for protection against toxic, Flammable for all Environments, Businesses and Industries.

AirSense ModuLaser V1.4 – Ensuring 24/7 Fire Protection

Having a fire system that provides 24/7 cover is essential if damage and risk to life are to be minimized. However, how can one be sure that the system is always working?

The AirSense ModuLaser V1.4 has the ability to e-mail selected personnel if a fault occurs on the system, meaning that faults are spotted and fixed straight away.

祝 虎年大吉，身體健康 ，新年快樂。

Gas Detection solutions for all markets, sectors and environments

Did you know AirSense ModuLaser is both EN and UL ?

1 - 4 Channels, Combustible Gas, Toxic Gas, Oxygen, Refrigerant,...

FyreLine linear heat detection systems are fully approved by the Underwriters Laboratories (UL) and bear the CE mark to show that they comply with European health, safety, and environmental protection standards.

祝 牛年大吉 🎊，身體健康 💪，新年快樂。🎉🎉

Waiguard Systems Limited updated their phone number.

https://www.youtube.com/watch?v=XfycBzJHKks

ASD ModuLaser ModuLaser is the latest in ASD innovation. This video explores the technology and applications

Bacharach’s range of refrigerant leak detectors helps you gain refrigerant safety compliance for ASHRAE 15, CSA-B52, BS EN 378 and others.

一圖看清為何 '相對' 比 '絕對' 可靠。