Dn music Agency

Floyd rose rail tail narrow

100% original authentic floyd rose
made in germany
high quality series tremolo bridge

Floyd Rose RT100N Rail Tail Tremolo System - Narrow 2-1/16" (modern) string spacing. (52mm/2-1/16")

The Rail Tail Tremolo is a full contact, dive-only tremolo designed to retrofit your existing Strat-style 6-point tremolo with no modifications to your guitar; a clever design merging the feel and reliability of a hardtail bridge with the flexibility of a tremolo system. Computer designed and precision-machined, the Rail Tail achieves maximum performance and stunning appearance without compromising comfort or feel. Its unique features allow for adjustability to fit a variety of guitar bodies and for an easy DIY installation.

Unlike the original tremolo design that rocks on a bevel located under the screw heads, the Rail Tail tremolo plate rotates around a precision rail that is mounted directly to the guitar body. The plate cradles the entire rail with precision as if they were one unit improving sound quality and tuning stability. This union also creates a greater breakpoint allowing open strings to maintain pitch when bending another, much like a hardtail.

Features:

Floyd Rose Rail Tail Tremolo System, Narrow

Fits Strat style guitars with 6 point bridges

Also fits 2 point bridge guitars with some drilling

Full contact, dive-only tremolo

Designed to retrofit your existing Strat-style 6-point tremolo

Feel and reliability of a hardtail bridge with the flexibility of a tremolo system

Adjustability to fit a variety of guitar bodies

Dive up to 15 degrees more than conventional tremolo bridges

Ultimate vibrational energy transfer from the strings to the guitar body resulting in better overall sustain and tonal qualities

Locking tuners and a quality nut are highly recommended with this system

DiMarzio scott lepage polyphia signature pickups
 
HSS configuration
dimarzio igno bridge
dimarzio true velvet middle
dimarzio true velvet neck
include screw
Plug and Play
100% original dimarzio 
made in USA
Pickup ony
box : not

Mounting studs & insert floyd rose pivot tremolo bridge gitar
authentic original floyd rose parts
made in germany 
high series .

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN  .

Description :
Replacement Floyd Rose Original Tremolo Bridge Mounting Studs & Body Inserts (set of 2). Floyd Rose studs have a fine thread not commonly found on other bridge posts and so if you wish to use OFR studs when upgrading to an Original Floyd Rose tremolo, removal of the existing body anchors is required, these give you a matching set to make installations easy.

Features

Bridge mounting studs and body Inserts with fine threads

Gotoh gitar tuning machine
PNP . include screw .
type    : SG360 AB07
warna : gold finish
posisi : sejajar / 6inline righ hand
gear ratio : 1:14
locking : not
box : not
Staggered : not
100% authentic original gotoh parts
made in JAPAN 

wilkinson tremolo guitar
style Stratocaster 
type : WV6
finish chrome & satin Stainless saddles
big block
box : not
100% original authentic wilkinson parts
made in korea .

item Description :
Steel Saddles For Stratocaster guitar
This is the higher quality made in Korea (MIK)
version from Sung Il (who make Tonepros and
Gotoh stuff), NOT the Chinese copies!
Wilkinson WV6 Tremolo (Vibrato) Bridge with
Wilkinson stamped Steel saddles, 
5 + 1 screw holes
with knife edges, full size 
Zinc Block with staggered
string holes to make corrections to intonation a
simpler job, without putting too much stress or
the saddles (see last photo). Push fit Trem Arm 
for quicker set up, is tightened by a small 
grub screw at
the top right, rear of the trem block. String spacing
0.8mm (54mm E to e), 6 matching colour 
mounting
screws, Allen key, claw & springs.
colour; Chrome and Gold
Wilkinson's take on the vintage style tremolo 
bridge
mounting with another unique design 
improvement
the screw spacing is a "universal fit". Elongated
holes mean the trem will fit on a body drilled
anywhere from 54mm (2 1/8") right up to 56.4mm
And as usual, the WV6 sports the narrower string
spacing at 54mm (2 1/8") found on most 
Wilkinson
trems.
The narrower spacing gives a much more stal
string lie across the neck, limiting the 
possibilities of
the E strings slipping off the frets, a great 
litt' 17/ ich
for anyone who likes their hammer ons and pu. 
offs.
Will fit a variety of Stratocaster stryle electric
guitars.

Gotoh locking tuners gitar
type    : SG381
warna : gold
posisi : sejajar / 6inline righ hand
system : locking
box : not
Staggered : not
PNP . include screw
100% authentic original gotoh parts
made in JAPAN
GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

Gotoh gitar locking tuners
type    : SG381
model : Staggered tuning
warna : cosmo / black nickel 
posisi : sejajar / 6inline righ hand
system : locking tuners
100% authentic original gotoh parts
made in JAPAN 

Emerson Jazz Bass Pre-Wired Kit
100% original emerson
made in USA
High quality parts

Description :
Wired with 22 AWG vintage push-back wire for that vintage look and sound. Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life. If you are installing this on an import guitar with metric sized pots you may need to ream your pickguard holes to accept the slightly larger US-Spec pots and buy US-Spec k***s.

Includes 

(3) CTS 250k Solid Shaft w/.250 Shaft Potentiometers 

(1) Switchcraft 1/4 Mono Input Jack 

(1) 0.047uf 300V Emerson Custom Paper in Oil Capacitor hiqh quality caps

(1) Volume Mod 

Wiring Diagram

Tremolo arm Fender Jaguar or Jazzmaster American Professional
100% authentic original fender genuine parts
made in USA

Description :
Fender® original replacement part for American Professional Jaguar® or Jazzmaster® guitars. American Professional Jaguar®/Jazzmaster® Tremolo Arm, Chrome

bridge gibson stop bar tailpiece with studs & insert
100% original genuine Gibson parts
made in USA 
code PTTP-015

Description :
Gibson Accessories Stop Bar Tailpiece
The original tailpiece for Gibson guitars

Gibson's original stopbar tailpiece was designed by legendary Gibson president Ted McCarty in the early 1950s as a modified version of the earlier wraparound bridge/tailpiece.

When combined with Gibson's pioneering Tune-o-matic bridge, the stopbar tailpiece delivers increased sustain, enhanced harmonic overtones, and improved tuning stability. Together, the combination form an industry standard considered the epitome of form and function in electric guitar bridge design.

Gibson Stopbar Tailpiece features:
Post Spacing: 3-1/4" (82.55mm)
Post Threads: U.S. 5/16-24

Fender tuning machine deluxe gold
original fender genuine parts
Made in TAIWAN 
Posisi 6in line

Description :
Special deluxe cast/sealed tuning machine with gold plating and pearl buttons. Can be retrofitted to most American and American Standard series guitars manufactured from 1998-present (some modification may be necessary for proper fit).
FEATURES
Set of six tuning machines with gold plating and pearl button
Dual guide-pin mounting
Includes mounting bushing and washer
For American and American Standard series guitars (1998-present)

tuning screwless fender american standard
original fender genuine parts 
made in Taiwan
Style Stratocaster or telecaster

Description :
Square diecast case measures .598" wide, .859" long overall, .358" tall.
Screw on bushings with washers.
Two locating pins cast into back of case, pin centers approx. .410".
No screws are required for mounting.
Smooth collar portion of tuner case that extends into the back of the headstock measures .390" diameter.
Six in line for right handed instruments.
Four of the tuners have string hole height of .740".
Two of the tuners have taller string hole height of .850".
Needs 10mm diameter headstock holes for mounting.
Fender logo on each tuner

floyd rose locking nut double locking 
100% authentic original floyd rose
made in germany 

Description :
Authentic locking nut for German-made Original and Pro Tremolo Systems. If you don't know the nut size you need, please consult the nut sizing chart below. This is an original Floyd Rose Germany made locking nut.

The Floyd Rose FRNR3BNP is a Complete R3 Locking Nut Assembly for Original Floyd Rose Tremolo Systems. These locking nuts will also work with non-Floyd Rose and Licensed Floyd Rose Tremolo Systems.

For those replacing existing locking nuts, the center-to-center distance of the mounting holes is .535"/13.59mm.

Type:
Floyd Rose R3 Locking Nut
Intended Instrument:
Electrric Guitars
Width:
1.6875"
String Spacing:
0.2631"

Ibanez Accu cast B125 & B120 bridge bass

100% original ibanez parts
screw EXclude

Varian :
4 string
5 string

item Description:
The Ibanez B125 Bridge Cosmo Black is the matching replacement bridge for five-string Ibanez Soundgear basses from the SR305 and SR375 series. It offers five adjustable string saddles and comes with screws and an adjustment wrench. 

Ibanez B125 Bridge Cosmo Black at a glance:
Replacement bridge for Ibanez Soundgear 5-string electric basses.
Suitable for SR305 and SR375
Five adjustable tailpieces

GOTOH T1502 tremolo bridge gitar
100% original gotoh
model T1502
finish gold
made in JAPAN 
plug and play 
( only tremolo unit non box )

Description :
This is a Gotoh T1502 tremolo bridge assembly with all mounting hardware and tremolo arm. This is the exact bridge used on Ibanez AZ guitars, and more specifically the Ibanez Premium line (although there is no difference from the Prestige bridges other than the block material, and all of them are made in Japan).

The T1502 is based on the Gotoh 510 tremolo (even uses the exact same bridge plate and stud/post components), so it is a drop-in fit for any bridge route that can accommodate the 510, which is most 2-point trem routes.

It features Ibanez's proprietary FST block design (only made with zinc), which has an extremely smooth tremolo response and effortless string tension. The T1502 has "narrow" string spacing identical to modern Fender spacing, which means your low and high E strings will tend to fall off the fretboard less compared to vintage spacing.

6 String Tremolo with 2 point mount

Chrome plated finish

Knife-edge 2-point tremolo

Hardened (chromium molybdenum) steel base plate

Black Zinc FST Block

Steel Saddles, 10.5mm string spacing

Includes tremolo arm, springs, tremolo claw, wrenches, and mounting screws

Mojotone Potentiometer 1 meg
Audio taper
type solid shaft
model jumbo potensiometer
100% original mojotone parts
made in USA
bisa untuk gitar atow bass
volume atow tone 
high quality Potentiometer 

Edge Zero II spring guitar tremolo original 
finish cosmo/black nickel 
plug and play 
Kelengkapan seperti di fhoto iklan

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

GOTOH T1502 tremolo bridge gitar
100% original gotoh
model T1502
finish chrome
made in JAPAN 
plug and play 
( only tremolo unit non box )

Description :
This is a Gotoh T1502 tremolo bridge assembly with all mounting hardware and tremolo arm. This is the exact bridge used on Ibanez AZ guitars, and more specifically the Ibanez Premium line (although there is no difference from the Prestige bridges other than the block material, and all of them are made in Japan).

The T1502 is based on the Gotoh 510 tremolo (even uses the exact same bridge plate and stud/post components), so it is a drop-in fit for any bridge route that can accommodate the 510, which is most 2-point trem routes.

It features Ibanez's proprietary FST block design (only made with zinc), which has an extremely smooth tremolo response and effortless string tension. The T1502 has "narrow" string spacing identical to modern Fender spacing, which means your low and high E strings will tend to fall off the fretboard less compared to vintage spacing.

6 String Tremolo with 2 point mount

Chrome plated finish

Knife-edge 2-point tremolo

Hardened (chromium molybdenum) steel base plate

Black Zinc FST Block

Steel Saddles, 10.5mm string spacing

Includes tremolo arm, springs, tremolo claw, wrenches, and mounting screws

t1502

vegatrem VT1 Ultra Trem standard tremolo gitar original tremolo vegatrem

Tremolo dengan stabilitas tinggi untuk model Stratocaster dan sejenisnya .
di jamin joss untuk vibrato tanpa harus bobok body

100% original VegaTrem
MADE IN SPAIN

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

DESCRIPTION :
VT1 Ultra Trem
The patented VT system (ES 1119430 U) is based on two basic principles: the adaptation of the bridge dimensions to the existing standard cavity in the ST models and the bridge pivoting system. Adapting the dimensions aims to allow the bridge to freely enter into the cavity of the guitar body by pulling the whammy bar back (tensioning the strings) and requires a redesign of the complete assembly (saddles, plate and block). To optimize the movement of the bridge, the pivotal center of action has been changed by adding a part (fulcrum) that replaced the traditional concept of support on screws, giving more amplitude to that movement. The shape of the point of support of the plate on the fulcrum has also been changed, minimizing friction, which is practically non-existent. The result is a homogeneous action very pleasing to the musical performance totally free of unwanted noises. (It is recommended to use low friction nuts and locking tuners).

VT1 Ultra Trem standard
For guitars that are fitted with vibrato with the traditional six screw system. Finished in high quality stainless steel.

The pack includes springs, adaptors and screws for the fulcrum and 1.5 mm (1/16 “) and 2.5 mm (3/32”) allen keys.

Kairon is the Official distributor of VEGATREM for the US.

Features & details
VT1 Ultra Trem standard For guitars that are fitted with vibrato with the traditional six screw system
Finished in high quality stainless steel

Bartolini Jazz Bass Original Dual In-Line Coil Bass Pickup Set 4-String 9J1 L/S

100% Original authentic Bartolini
MADE IN USA

Full and warm deep vintage tone - The most popular dual inline-coil hum-cancelling Jazz bass upgrade pickups.
 
Coil Structure:Dual Inline Hum-killing
Cable Type:Shielded Coaxial Hot Core
 
Magnetic Circuit:
2 types of carbon steel powered by ceramic (ferrite) magnets
Opposite polarity for bass and treble coils for neck and bridge pickups
 
9J-S1 - Neck
DC Resistance: ~6.1KΩ
Resonant Frequency: ~5.7KHz
Sensing Width: 2.52" [64mm] Max 1.89" [48mm] Min
 
9J-L1 - Bridge
DC Resistance: ~6.7KΩ
Resonant Frequency: ~4.9KHz
Sensing Width: 2.52" [64mm] Max 1.89" [48mm] Min

Fender Guitar Tele Pure Vintage Wax Capacitor 05UF 
150V 

100% original authentic fender genuine parts 
made in USA 

Description :
Genuine Fender Pure Vintage American vintage Wax Paper Capacitor- .05uf @ 150V. 
Replicas of original-style capacitors.
Wax paper construction for warm vintage tones Used in tone circuit of vintage Telecaster guitars Fits most vintage and modern Telecaster guitars.

fender offers a wide selection of pure vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic fender in mind. from potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era fender parts and have been used on a number of fender reissue instruments and amplifiers, including our american vintage series of guitars and basses. but best of all, pure vintage guitar and amp electronics are also versatile enough to fit most fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup. 
pure vintage wax paper capacitor, .05uf @ 150v
replicas of original-style capacitors

wax paper construction for warm vintage tones

used in tone circuit of vintage telecaster guitars

fits most vintage and modern telecaster guitars

pre wired emerson Jazzmaster custom standard
100% Aithentic original emerson
for Jazzmaster model guitar
high quality parts components
made in USA

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

DESCRIPTION  :
Handwired in the USA
Our Standard Jazzmaster prewired kit is a stripped down circuit that does NOT include the upper controls found on a traditional Jazzmaster wiring circuit. Our prewired kit is wired up 50's style like during the golden area of vintage Gibson's. This 50's style wiring is perfect for someone who wants the simplicity and purity of tone that a master volume & master tone circuit provide.

This Prewired Kit Includes :
Master Volume - Split Shaft Audio Taper Pot
Master Tone - Split Shaft Audio Taper Pot
Switchcraft Output Jack
Switchcraft 3-Way Toggle Switch (Switch Tip Sold Separately)
Emerson Classics Paper in Oil Tone Capacitor
PLEASE NOTE THAT THIS KIT DOESN'T INCLUDE A PICKGUARD.

This kit DOES NOT include the rhythm circuit or roller pots normally found on a traditional jazzmaster circuit.
Installation Tips for K***s on Split Shaft Pots
US Spec CTS split shaft pots are made to fit USA Spec 24 spline push-on k***s. Some USA & Import Guitars will need new USA Spec K***s as even some US makers use import spec parts which will not work with our pots. We recommend that you don't rush the k**b install process. If your k**b is too tight and is not going on ,slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to push on the k**b you don't damage the pot shaft by exerting too much downward pressure.

If you find this harness elsewhere in the EU at a lower price, inform us, and we'll match that price. As a token of appreciation, we'll include some freebies for bringing it to our attention.

Pre wired emerson telecaster thinline
Original emerson
Made in USA

Varian configuration :
- 250K / 3way
- 500K / 3way
- 250K / 4way

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

Description :
THINLINE TELECASTER PREWIRED KIT
Handwired In Bixby, Oklahoma USA
The only difference between this kit and our standard T3 Prewired Kit is the spacing. This is a Telecaster Prewired Kit built and spaced especially for Thinlines (Controls Mounted on the Pickguard, NOT the control plate).

Spacing
Center of Tone K**b to Center of Volume K**b is 2.00"
Center of Volume K**b to Center of 3-Way Switch is 2.00"
We build these kits specifically for the thinline setup and spacing. If your volume and tone k***s are 2.00" (center to center of k**b) Than this kit will work for you. If your k***s are under 2.00" apart in spacing this kit will still work... Simply use your thumb and create a slight inward radius (curve) on the teflon coated buss wire towards the center of the wiring kit to shorten the buss wire length allowing for a shorter control k**b spacing.

Includes
(2) Emerson / CTS pro Solid Shaft w/.375" (3/8") Shaft Length
(1) Oak Grigsby Switch
(1) Switchcraft 1/4" Mono Input Jack
(1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)*
(1) Volume Mod
Wiring Diagram

Fender American Vintage .05uF Hot Rod Tone Capacitor
100% original authentic fender genuine parts
made in USA

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

Description :
(Genuine Fender Hot Rod .05mfd 150v tone capacitor for guitar and bass.
Classic Mylar and tin foil construction for crisp clear tones.
Used in '50s and '60s Vintage Hot Rod Telecaster guitars. Fits most vintage and modern guitars and basses.

Rockfiel mafia guitar pickup
warna chrome 
5 conductor kabel
original rockfield 
made in USA .
pickup langka / limited

GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

item Description :
Rockfield’s Fat Ass pickup defined and enhanced these qualities with tight lows, thick crunch and sizzling highs. The Fat Ass’s harmonic enhancement is focused on the guitar’s upper midrange and deep treble tones, creating rich musicality that does not interfere with clarity. This big humbucker also pumps out tons of output, which is unusual for such a clear pickup. Neck position sounds were similarly surprising. The Warbeast’s Mafia humbucker sliced right through my Rectifier’s dense distortion. Its tone was full, crisp and devoid of any nasal quality. Both pickups cleaned up well when I rolled the guitar’s volume down, making it possible to leave my distortion maxed and still get a fantastic rhythm sound.”

Guitar World summed it all with, “The icing on the cake is the Rockfield pickup set. These two pickups generate an incomparable balance of power, sustain and punch, perfectly flattering the Warbeast’s intelligent design.”

Rockfield Fat Ass Bridge Pickup Specifications
D.C. Resistance: 12.43K
Magnets: USA Alnico V
Lead wire: Four conductor

Rockfield Mafia Neck Pickup Specifications
D.C. Resistance: 10.33K
Magnets: USA Alnico V Ceramic
Lead Wire: Four conductor

neck gitar Aaron marshall AM7 
seven string
100% neck original schecter
factory in indonesia
bukan neck KW

spesifikasi : 
Fretboard Material Macassar Ebony

Neck Material Quarter Sawn Wenge

Inlays Aluminum Offset/Reverse Circles

Side Dot Markers Super Blue Luminlay

Scale 26.5" (673MM)

Neck Shape Thin "C"

Thickness 1st Fret- .787" (20MM), 12th Fret- .866" (22MM)

Frets 24 X-Jumbo Stainless Steel

Fretboard Radius 16" (406MM)

Nut Graph Tech XL Black Tusq

Nut Width 1.889" (48MM)

Truss Rod 2-Way Adjustable Rod w/ Heel Access Spoke Wheel

bisa untuk semua gitar yg memakai neck dengan 
spesifikasi di atas .
GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

Gretsch broad Tron 
type BT-3S guitar pickup
warna burst chrome
harga tertera untuk 1 set bridge dan neck
barang dan kelengkapan persis
seperti di fhoto iklan .
pickup masih segel plastik
100% original Gretsch
Made in Korea 
GARANSI UANG KEMBALI JIKA BARANG TIDAK SESUAI IKLAN .

Description :
Utilizing a combination of Alnico 5 and Alnico 2 magnets, the new BT-3S pickups provide stronger mids, tight but full lows, and smooth clear highs that retain a smooth and musical presence.

Floyd rose R2 locking nut guitar tremolo

100 % Original Floyd Rose parts
Made in germany
High series

garansi uang kembali jika barang tidak sesuai iklan .

DESCRIPTION :
With the invention of the world’s first locking vibrato system in 1977, Floyd D. Rose completely revolutionised the electric guitar, and with it a whole new generation of players.
40 years later Floyd Rose offers a vast array of replacement vibrato systems, upgrades and spares, and are used and trusted by some of the most influential and famous guitar players on the planet. Authentic locking nut for German-made Original and Pro Tremolo Systems .

Features & details
Authentic locking nut for German-made Original and Pro Tremolo Systems

Width 41.3mm; Radius 10"

Fender vintage Ultra Noiseless telecaster pickup set

100% original fender genuine parts 
made in USA .
pnp lengkap plug and play

Description : 
Fender Ultra Noiseless Vintage Telecaster Pickups, Set of 2, Black and Chrome

The sound of Fender’s flagship instruments. Fender Ultra Noiseless pickups are the pinnacle in stacked single-coil design, crafted with new winding techniques for livelier and more expansive tone. Alnico 5 magnets with polysol wire deliver a vintage voice with classic Telecaster sparkle without the 60-cycle hum.

Ultra Noiseless Telecaster pickups have the twang and bite that you expect from vintage Telecaster pickups, with no hum.

Specs:

Series: Noiseless

DC Resistance: Neck 11.3 - 11.7K | Bridge 9.9 - 10.5K

Inductance: Neck 2.75 Henries | Bridge 3.1 - 3.5 Henries

Lead Wire: Vinyl-covered

Magnet Type: Alnico 5

Magnet Wire: Polysol-coated

Output: Vintage

Pickup Configuration: SS

Pole Pieces: Flat

Features:

Fender Ultra Noiseless Vintage Telecaster Pickups

Polysol coated magnet wire

Flat non-beveled pole pieces

Alnico 5 magnets for greater focus and enhanced dynamics

Installation hardware included

Made in USA

Quantity: Set of 2

Color: Black (Bridge) & Chrome