Weld Master

Weld Master

Founded in 2002
One stop center of high-quality & affordable Welding Equipment & Welding Accessories.

06/11/2023

AUSTWELD developed a non-chlorinated solvent anti-spatter because of concern for a welder’s health when he welds through anti-spatter that contains chlorinated solvents.

When chlorinated solvents are exposed to extreme heat, as in welding operations or torch cutting, they tend to decompose, yielding phosgene, hydrogen chloride and chlorine gas fumes.

The manufacturer of chlorinated solvents has conducted “glove box welding studies” and published the results of gases formed in stick, MIG and TIG welding processes. Their warnings are not to weld where chlorinated solvent vapors are present, and we have welders spraying chlorinated solvent anti-spatters on metal then welding through it.

Safe De Spat takes the danger and concern out of using anti-spatters since it has no chlorinated solvent base. This special water emulsion base anti-spatter sprays wet and is designed to weld through while wet, without fear of toxic fumes to the welder.

Since this product contains a heavier concentration of anti-spatter active, you only have to apply a light coat. Welderstend to spray heavy coats and, as in all anti-spatters, that can cause porosity. It will not dissolve soap stone markings and in paint compatible. It is bio-degradable, non-flammable, does not contain fluorocarbons or hydrocarbons.

AUSTWELD developed a non-chlorinated anti-spatter because we were concerned about a welder’s health from test chemical conducted. A good way to get that point across is to spray a chlorinated anti-spatter into a cap on the can and smell it. Now, do the same with our non-chlorinated Safe De Spat and see the difference. Also, compare MSDS on the two products. If Safe De Spat is used according to the directions and information on the can, it produces excellent results and is non-toxic to the welder.

02/11/2023

Best greetings to our Perak state sovereign, Sultan Nazrin Muizzuddin Shah on His Royal Highness' 67th birthday.
May Silver State continues to prosperous under you ruling.
Daulat Tuanku!!!

In Conjunction of Sultan Perak Birthday, our workshop will be CLOSE on 03/11/2022 (Friday) and resume business on 04/11/2022 (Saturday).

30/10/2023

Nipponalloy Pickling Solvent classified by Gel type and Paste type. Those solvent specifically intended for standard brush pickling of weld seams and smaller surfaces of all stainless steel grades.

Available now. Jom!
Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

23/10/2023

年年逢重阳,岁岁皆安康。
惟愿时光不老,岁月静好,愿天下父母岁岁长安,身体健康久久,快乐幸福久久,美好相伴久久。
祝大家九月九重阳节快乐!

Double Ninth Festival (重阳节 Chóngyáng jié) also known as “Chongyang” falls on the 9th day of the 9th month under the lunar calendar and is an ancient memorial festival. It is a day to show appreciation and love to the elderly.

#重阳节

23/10/2023

Nipponally Slate Pencil manufactured from natural stone, non-toxic, harmless, no radiation & no dust. Processed by high temperature quenching treatment, hardness, wear resistance & long service life. It can draw clear lines or marks on the surface of various items, which is very convenient and widely used.

Size: 5" x 3/16"

We're available for Buy now. Jom!
Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

21/10/2023

Austweld Rubber Neoprene Welding Cable H01N2 are flexible and durable, capable of withstanding the high heat, mechanical stress, and electrical demands of welding operations.

Get Yours Now to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

18/10/2023

Portable Electrode Dryer / Oven / Quiver Capacity:
✅5kg
✅10KG

Get Yours Now to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

16/10/2023

Welding Rotator as known as turning roll /turning roller/roller bed is used to weld spheric and longitudinal seams of cylindrical objects. For example, barrels, pressure containers, boilers, etc. Welding rotators are similar to positioners, in that it’s a mechanical meant to rotate cylindrical vessels. The welding rotator mainly consists of a base, driving rollers, idlers, electric cabinet, brackets, transmission device, and a power-driven device.

High-quality solid PU ARA (Australia) rolls with very good load bronze bush capacity, heat, and wear resistance. The final drive gears are specially modified for turning rolls application, The worm wheels are designed to be reinforced against stresses by the addition of a center steel hub. All Bronze bush is of the heavy-duty type.

Electronic control panel complete with an electrical remote control pendant for forward, reserve rotation and speed variation. Variable frequency drives Austweld Micno AC inverter control motors as prime movers. Our design and production can better meet the increasing demands of domestic and foreign pressure vessel manufacturers.

We're available for Buy & Rental. Jom!
Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

12/10/2023

We have a variety of Welders and even an awesome DV Series Plasma Cutter available at our warehouse!

🏃🏃‍♂️Jom marilah Check out with us now!

Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

11/10/2023

WELDMASTER Welding Partitions Bays are made from metal. It is suitable for the training center, industrial and workshop use. It is specially designed to be detached and reassemble in care of moving to another different venue or training center. The welding partitions will be supported by the ducting system, manifold system, fume arm, and welding table.

We're available for Buy now. Jom!
Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

10/10/2023

We have a variety of Welders and even an awesome ARC Tornado Series Welder available at our warehouse!

🏃🏃‍♂️Jom marilah Check out with us now!

Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

06/10/2023

AUSTWELD diesel engine-driven high-performance heavy-duty power welding generator designed for shield metal Arc (Stick) welding. A unique AUSTWELD welding generator under harsh operating conditions because it combines a rugged case design with a proven, simple, conventional-technology generator design.

We're available for Buy & Rental. Jom!
Feel interest to 📞 call us +605-282 9421 or 📧email to [email protected] for more information.

17/04/2023

🎤Balik Kampung~ Oh oh oh Balik Kampung~

Hari Raya Aidilfitri is just around the corner!

Ucapkan Selamat Hari Raya Aidilfitri kepada Semua🕌🌙

Dear Our Business Partners,

In conjunction with this meaningful festival, kindly be informed that we will be closed on 22 April 2023 (Saturday) to 24 April 2023 (Monday) and resume business on 25 April 2023 (Tuesday).

24/12/2022

We would like to take this time to say Merry Christmas, and we hope everyone has a very Happy New Year🎊⛄️🎄

In Horner of Christmas, we will be closed 24 Dec 2022 at 1:00pm.Regular office hours will remuse 27 Dec 2022

22/12/2022

Today marks one of the most important festival in the Chinese tradition, the Winter Solstice. Dongzhi, which means, “the extreme of winter”, has been commemorated with huge festivities by many traditional Chinese families in Malaysia.

Here, would like to take this opportunity to wish ‘A Happy Winter Solstice’ to all those who celebrate it. As we savour the tang yuan delicacy on this special occasion, let us all be reminded of the importance of fostering strong ties with our families and friends, for they are our most cherished possessions.

03/11/2022

We would like to take this opportunity to wish our beloved Sultan Perak a Happy Birthday. May he continue to be blessed and rule our state with righteousness.

In Conjunction of Sultan Perak Birthday, our workshop will be CLOSE on 04/11/2022 (Friday).

Workshop will resume business on 5/11/2022 (Saturday). Happy Holiday to all Perakians.

15/09/2022

🇲🇾HAPPY MALAYSIA DAY🇲🇾

Dear Our Valued Customer, Suppliers & Partners, we will be closed on 16th September 2022 (Friday) and we will be resume business on 17th September 2022 (Saturday).

Photos from Weld Master's post 01/09/2022

Hurricane™ Series P42-DV is the latest IGBT inverter technology, represent the most efficient solution for the manual cutting of any metal and perforated sheet. Thanks to the electronic control and inverter precision and flexibility, in any circumstance it is possible to determine the most correct parameters to obtain high quality cutting depending on material and thickness.

For more information please contact:
WhatsApp: Ms. Stephanie - +6012 525 5112
Email: [email protected]

30/08/2022

Dear all Distributors and Customers,
In conjunction with Malaysia Independence Day, we are pleased to inform that office will be closed on 31th August 2022 (Wednesday) and will resume operation on 1st September 2022 (Thursday).
Wishing All Malaysians, Selamat Hari Kemerdekaan 🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾

30/08/2022

☘️AUSTWELD TYPHON SERIES - MMA172 LCD☘️
The TYPHON MMA172 LCD is a robust and durable power source for the professional welder. The machine provides state-of-the-art welding performance and reliability through use of the latest high performance power electronics and LCD control; ensuring a precise consistent arc.
**RM280.00/SET
** COD Ipoh Area
** Postage according to area
For more information please contact :
WhatsApp:
Ms. Stephanie - 0125255112
Email: [email protected]

Photos from Weld Master's post 30/08/2022

AUSTWELD DX852/2 Welding Generator
✨✨2 Times fuel consumption save to compare 1 welder✨✨

Please feel free to contact us, send your enquiry to [email protected] or directly add WhatsApp us for a faster reply. We will sacrifice all of our industrial experience for your electric power demand. Thank You.

👉WE PROVIDE SALES / O.E.M & RENTAL👈

For more information please contact :
WhatsApp:
Ms. Stephanie +60 12-525 5112
Email: [email protected]

Photos from Weld Master's post 19/07/2022

Tornado™ ARC500i LCD are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding. Robust control panel protected against accidental impact. Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments. For professional MMA welding with electrodes up to 8mm with a high duty cycle of 500 A at 80%. Ideal for operation in high ambient temperatures. The machine automatically provides operators with the optimal start and stop parameters based on the set welding current. A booster circuit provides additional voltage for superior cellulosic arc starts and welding performance.

📞📞📞Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60125255112 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

Photos from Weld Master's post 15/07/2022

TORNADO™ ARC400i LCD
Tornado™ ARC400i LCD are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding. Robust control panel protected against accidental impact. Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments. For professional MMA welding with electrodes up to 6mm with a high duty cycle of 400 A at 80%. Ideal for operation in high ambient temperatures. The machine automatically provides operators with the optimal start and stop parameters based on the set welding current. A booster circuit provides additional voltage for superior cellulosic arc starts and welding performance.

📞📞📞Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60125255112 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

Photos from Weld Master's post 14/07/2022

TORNADO™ ARC250i LCD
Tornado™ ARC250i LCD are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding. Robust control panel protected against accidental impact. Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments. For professional MMA welding with electrodes up to 4mm with a high duty cycle of 220 A at 60%. Ideal for operation in high ambient temperatures. The machine automatically provides operators with the optimal start and stop parameters based on the set welding current. A booster circuit provides additional voltage for superior cellulosic arc starts and welding performance.

📞📞📞Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60125255112 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

Photos from Weld Master's post 13/07/2022

TORNADO™ ARC300i LCD
🔥Robust & Powerful Full LCD Inverter ARC DC Welding Machine🔥

Tornado™ ARC300i LCD are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding. Robust control panel protected against accidental impact. Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments. For professional MMA welding with electrodes up to 5mm with a high duty cycle of 300 A at 80%. Ideal for operation in high ambient temperatures. The machine automatically provides operators with the optimal start and stop parameters based on the set welding current. A booster circuit provides additional voltage for superior cellulosic arc starts and welding performance.

📞📞📞Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60125255112 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

03/06/2022

May in this boat race and high spirited celebrations keep your business grow further and also don’t forget to enjoy the delicious dumplings🐉🚣🏻🐉🚣🏻🐉🚣🏻…. Warm wishes on the pious occasion of Dragon Boat Festival from all the members of WELDMASTER.

31/05/2022

☘️AUSTWELD TYPHON SERIES - MMA172 LCD☘️
The TYPHON MMA172 LCD is a robust and durable power source for the professional welder. The machine provides state-of-the-art welding performance and reliability through use of the latest high performance power electronics and LCD control; ensuring a precise consistent arc.

**RM280.00/SET
** COD Ipoh Area
** Postage according to area

Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60125255112 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

26/05/2022

Austweld Micro TIG Cold Welding Machine - TIG TC300d -
Features:
📌TIG Pulse stainless steel cold welding / argon arc welding / manual welding multifunctional machine.
📌It can be used for precision welding of 0.4mm to 6mm stainless steel sheet.
📌Cold welding DC welding current: 5 amperes to 300 amperes.
📌The weld does not change color.
📌Small size, high power, stable and reliable quality.
📌It is a CPU-controlled digital pulse DC cold welding/manual welding/argon arc welding multifunctional electric welding machine, with 2T/4T, pulse frequency adjustment and pulse speed adjustment functions.
📌It has the function of intelligently detecting faults and displaying fault digital codes.
📌12 month warranty.
📌Come and get yours today from our showroom!

For more information please contact :
Mr. KL Hooi : +6012-5151112
Ms.Kuan : +6012-5055112
Mr.Chong : +6012-5185112
Ms.Alice : +6012-5054112
📧 Email : [email protected]

26/05/2022

☘️AUSTWELD TORNADO SERIES - ARC218 LCD☘️
The Tornado ARC218 LCD is a robust and durable power source for the professional welder. The machine provides state-of-the-art welding performance and reliability through use of the latest high performance power electronics and LCD control; ensuring a precise consistent arc.

**RM480.00/SET
** COD Ipoh Area
** Postage according to area
Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60165296427 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

19/05/2022

☘️AUSTWELD TORNADO SERIES - ARC188 LCD☘️

The Tornado ARC188 LCD is a robust and durable power source for the professional welder. The machine provides state-of-the-art welding performance and reliability through use of the latest high performance power electronics and LCD control; ensuring a precise consistent arc.

**RM380.00/SET
** COD Ipoh Area
** Postage according to area

Feel free to contact us!
KL Hooi - +60125151112 (WhatsApp)
Stephanie - +60165296427 (WhatsApp)
Chong - +60125185112 (WhatsApp)
Alice - +60125054112 (WhatsApp)
Email: [email protected]

Photos from Weld Master's post 10/05/2022

☘️AUSTWELD STORM SERIES - MIG178s☘️
**Exclusive sMIG (“Synergic MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc and superior, repeatable welds; increases productivity for the experienced welder, and reduces training time for novice welders.
**Synergic control for all welding with preset synergic curves according to used material gas & wire diameter.
**MIG welding use the unique welding dynamic characteristic control circuit, stable welding arc, little spattering, beautiful shaping, high welding efficiency
**Closed loop feedback control, constant voltage output, suitable for wide voltage range (+/- 15%).
**Adjustable welding voltage and current, excellent welding performance
**The duty cycle is so high that it can weld long time.
** COD Ipoh Area
** Postage according to area

Feel free to contact us!
Stephanie - 0165296427 (WhatsApp)
Chong - 0125185112 (WhatsApp)
Alice - 0125054112 (WhatsApp)
Email: [email protected]

07/05/2022

The STORM MIG220SD Series Welding Machines offer some of the most innovative welding technology available. A breakthrough design inspired by professional welders, the Rebel is a complete package to weld anything –mild steel, MIG aluminum, stainless steel –and go anywhere.
True multi-process performance for best-in-class MIG, Flux-cored, MMA, including challenging electrodes, and Lift TIG welding with STORM MIG220sd.
Exclusive sMIG (“Synergic MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc and superior, repeatable welds; increases productivity for the experienced welder, and reduces training time for novice welders.

Please feel free to contact us, send your enquiry to [email protected] or directly add WhatsApp +60125151112 (Mr. KL Hooi) / +60125055112 (Ms. Kuan) for a faster reply. We will sacrifice all of our industrial experience for your electric power demand. Thank You.

Photos from Weld Master's post 06/05/2022

☘️AUSTWELD STORM SERIES☘️

Please feel free to contact us, send your enquiry to [email protected] or directly add WhatsApp +60125151112 (Mr. KL Hooi) / +60125055112 (Ms. Kuan) for a faster reply. We will sacrifice all of our industrial experience for your electric power demand. Thank You.

16/04/2022

☘️AUSTWELD TORNADO SERIES☘️
Please feel free to contact us, send your enquiry to [email protected] or directly add WhatsApp +60125151112 (Mr. KL Hooi) / +60125055112 (Ms. Kuan) for a faster reply. We will sacrifice all of our industrial experience for your electric power demand. Thank You.

29/01/2022

🎉🎉🎉Happy Chinese New Year🎉🎉🎉

Please be informed that our office will be closed from (Half Day) – in conjunction with the celebration for Chinese New Year.

We will resume our business operation on .
Do drop us an email at [email protected] if you have urgent matters. We will get back to you as soon as possible.
Thank you for all the trust and continuous support. We look forward to work with you in the years to come.

Last but not least, WELD MASTER INDUSTRIES SDN BHD would like to wish all our valued customers the days ahead are filled with immense joy and prosperity.

31/12/2021

Happy New Year 2022! 🎆

Please be informed that customer support will not be available on Saturday (1st January 2022) in conjunction with the celebration for New Year. We will resume our business operation on Monday (3rd January 2022).

WELD MASTER INDUSTRIES SDN BHD wishes all our customers and friends a prosperous New Year! Thank you for all your support last year. May your business continue growing and you’ll be filled with much success and wealth in the upcoming year.

24/12/2021

Dear Valued Customers & Friends,
⚠️Please be informed that our shop will be close from 25th Dec 2021 (Sat) through to 26th Dec 2021 (Sun) for Christmas Holiday⚠️

🌲Business will resume as usual on 27th Dec 2021 (Mon).
We wish you a very happy Christmas and holiday season. We know that this past year has been very difficult for you, and we pray that the coming year brings more certain times for your family. Sending all our love and good wishes for better days ahead.

Wishing you a Merry Christmas and a Happy New Year 2022 ahead from Weld Master Industries Sdn Bhd

Want your business to be the top-listed Engineering Company in Menglembu?
Click here to claim your Sponsored Listing.

Telephone

Address


5-7, Persiaran Perusahan Kledang Utara 1/5, Kawasan Perindustrian Chandan Raya, Menglembu Ipoh
Menglembu
31450

Opening Hours

Monday 08:30 - 05:30
Tuesday 08:30 - 05:30
Wednesday 08:30 - 05:30
Thursday 08:30 - 05:30
Friday 08:30 - 05:30
Saturday 08:30 - 01:00

Other Industrial Companies in Menglembu (show all)
Mi Hing Iron Works 美興鐡業工程 Mi Hing Iron Works 美興鐡業工程
Menglembu, 31450

专业制造铁门,凉蓬,厂棚 , 户外建设 及 其他铁工等... Specializing in manufact

Auto-Mech Industries Resources Sdn. Bhd. Auto-Mech Industries Resources Sdn. Bhd.
No. 2, Dataran Kledang 8, Kawasan Perindustrian Chandan Raya
Menglembu, 31450

AUTO-MECH IND. RES. S/B (Malaysia) was established since 1994.

Sts Stainless Steel & Engineering Sts Stainless Steel & Engineering
129, Hala Perusahaan Menglembu 13
Menglembu, 31450

I H M Supplies Sdn Bhd I H M Supplies Sdn Bhd
Lot 118, Hala Perusahaan Menglembu 5, Kawasan Perindustrian Menglembu
Menglembu, 31450MENGLEMBU,PERAK.

I. H. M. Supplies Sdn. Bhd. was established on 8th March 1997. Its one of the fastest growing palm o

EPI Marketing Sdn. Bhd. EPI Marketing Sdn. Bhd.
Laluan Perusahaan Kledang 5
Menglembu, 31450

Manufacturer & Distributor of Leading brand of Nylon & Stainless steel Cable ties, Electrical access

TS Multitech TS Multitech
No. 42 Hala Perusahaan Menglembu 13 Kawasan Perindustrian Chandan Raya
Menglembu, 31450

Your Engineering & OSH Solution The Repairer