PowerJaws
Secures your operations. The Power Jaws History
The market presented us with a challenge:
Standard equipment was not designed for the new requirements.
Alternative solutions were not optimized for new drillpipe standards and caused reduction in safety and efficiency. We developed the Power Jaws as the first low-marking system to handle drillpipe in standard Iron Roughneck and DDM Torque wrench. Our system is designed to handle all sizes of equipment, making trouble free and cost effective operations for all our customers. This is made possible th
Summertime is here again! ๐
Holiday is approaching here in Norway and our subcontractors are closing for necessary maintenance and upgrades. In weeks 29-33 (15/7 โ 18/8) we will not be able to run up production if you should have custom needs.
However, we have a pretty solid stock of standard dies that we can ship the same day we receive the PO. We are able to meet your standard needs during the period, but if "all rigs" decides to re-supply at the same time it may be a bit more challenging task.
We kindly ask our customers to check your stock for upcoming operations if you need to run an order to be covered during this period.
Any questions? Contact us on [email protected] ๐จ
And most important of all: We wish you all a very nice summer! ๐๐ง
Regards from the PowerJaws team!
Merry Christmas and a Happy New Year from the PowerJaws Team! ๐
In PowerJaws we can proudly look back on another recordbreaking year. Some of the highlights:
๐ 12000 dies delivered
๐ Approximately 50% of the orders are shipped same day as PO is recieved
๐ Moved in to new office location at Kokstadflaten 11 in Bergen
๐ And most importantly; over 300 kg (!) of our famous "Powerjaws skumnisser" has been sent to our valued customers! ๐
Do you need more info on what PowerJaws can offer?
Send us an email on [email protected]! ๐จ
New office address! ๐ PowerJaws has moved to Kokstadflaten 11 (just outside of Bergen). The coffee is ready so don't hesitate to stop by! ๐โ
PowerJaws AS is proud to share this feedback from one of our valued customers! Our new and improved jaws with Spring Locking Plate (SLP) has proven itself as a recommended solution with the following benefits:
โญ Less exposed in red zone
โญ Less heavy lifting and reduced risk of squeeze injury
โญ Less tools needed
โญ Less expose for dropped objects
โญ Less use of manual rig tong (stuck connections)
โญ Less exposed to NPT
โญ Improved operational time
Mr. PowerJaws himself turns 50 (!) today. Happy birthday to รrjan Kvande, let's eat cake! ๐๐ฅณ
Summertime! ๐
Holiday is approaching here in Norway and our subcontractors are closing for necessary maintenance and upgrades. In weeks 29-32, (17/7 โ 20/8) we will not be able to run up production if you should have custom needs.
However we have, as you may have seen, a pretty solid stock of standard dies that we can ship the same day we receive the PO. We are able to meet your standard needs during the period, but if "all rigs" decides to re-supply at the same time it may be a bit more challenging task.
We kindly ask our customers to check your stock for upcoming operations if you need to run an order to be covered during this period.
Any questions? Contact us on [email protected] ๐จ
And most important of all: We wish you all a very nice summer! ๐๐ง
Regards from the PowerJaws team
New record! ๐ฅณ
The Powerjaws team always has a goal to push the limits and continuously improving our products. Today a new record has been set by our supply chain, with a shipment ready to go within an hour of the received purchase order! ๐
Look at this timeline, complete from inquiry to customer invoice:
๐๏ธ 21.06.23 21:18: Inquiry received by customer
๐๏ธ 21.06.23 22:07: Quote sent to customer
๐๏ธ 21.06.23 22:34: Customer closes bid
๐๏ธ 22.06.23 06:59: Purchase order received
๐๏ธ 22.06.23 07:09: Powerjaws sales order created
๐๏ธ 22.06.23 07:17: Warehouse order created
๐๏ธ 22.06.23 07:57: Items packed and shipment booked
๐๏ธ 22.06.23 07:58: Invoice sent to customer
All this is possible thanks to our sales team, highly dedicated partners and focus on digitalization in our supply chain management. In the picture we see Steve, mr. Logistics himself, at Totech in Sweden with the shipment ready to go. ๐ฆ
Last, but not least, thanks to our valued customers! ๐๐
PowerJaws AS is going into summer holiday mode when it comes to production for the next 3 weeks. But do not worry, we have a pretty solid stock of standard dies that can be delivered fast during the holiday! ๐๐๏ธ
Need to put in an order?
Contact our sales team: [email protected] ๐จ
To all of our customers; have a nice summer! ๐
Klikk her for รฅ fรฅ din Sponsede Oppfรธring.
Our Story
The PowerJaws History
The market presented us with a challenge:
Standard equipment was not designed for the new requirements. Alternative solutions were not optimized for new drillpipe standards and caused reduction in safety and efficiency.
We developed the Power Jaws as the first low-marking system to handle drillpipe in standard Iron Roughneck and DDM Torque wrench.
Our system is designed to handle all sizes of equipment, making trouble free and cost effective operations for all our customers. This is made possible through features such as curved dies and the Key Hole system. This enables easy change out between our different jaws sizes without any loose parts. The Power Jaws will do the job right every time, creating value and improving safety.
We have developed Power Jaws and dies for different manufacturers, making handling of new pipe design possible.
Videoer (vis alle)
Kontakt bedriften
Telefon
Nettsted
Adresse
Kokstadflaten 11
Bergen
5257