Teasergy

Thank you for the opportunity to be part of the installation of 159-MWp Laoag and Laoag 2 solar power project. As an Electrical contractor we support installation of renewable energy as our source of power.

Preventive Maintenance of Dry Type Transformer.
Measuring the ratio on each tap of the transformer to ensure its integrity as much as possibe.

Service

Maintenance

TEASERGY brings testing to your door, dramatically reducing the time expensive equipment is out of service. Contact us today to find out how we can help you with your electrical needs.

To find out more about our mobile testing services call us on (02) 88004123 or visit us on our page!!!

Degassing of power transformer

An ex*****on of oil purification in a 2.5MVA power transformer 1t 3000L/HR.

Excellent result in Di-electric Breakdown voltage and Dissolved Gas Analysis were observed. Good “As-Left” results.

Book your schedule now.

For inquiries you may email [email protected]

Teasergy terminates Cross Linked Polyethylene or XLPE cables.
We uses heat-shrink type, cold-shrink type or Pre-moulded push on type cable terminations in perspective to our clients need.

Our certified terminators can terminate XLPE cables up to 500kV.
We can always support what our clients needs.

In fact, we also use standard testing:
Insulation Resistance Test
Very Low Frequency

For requirements you can email us at [email protected] and contact our viber number via 0966 306 4768

On behalf of our company, we would like to extend our gratitude to our dear clients, employees, mentors and partners who have been part of our journey in this year, 2022. Because of you, we have survived our start up. The success of our company is your success too.





We empower!

Preventive Maintence of Air Circuit Breakers.
Integrity test of the following:

1. Insulation Resistance Test
2. Contact Resistance Test
3. Schneider Electric FFTK.

Tested by GWP-TEASERGY

-engineering

Preventive Maintenance of Electrical Equipment by GWP & Teasergy

⚡️Low Voltage Switchgear
⚡️Transformers
⚡️Medium Voltage Switchgear

Site Acceptance of 1000kVA power transformer

✅ Insulation Resistance
✅ Winding Resistance
✅ Turns Ratio
✅ Insulation power factor
✅ Di-electric Breakdown Voltage
✅ Earth ground Resistance

Replacement of 150kVA dry type (isolation transformer) into dry type auto tap transfomer ⚡️

⚡️ Emergency Response
⚡️Temperature Correction
⚡️ Testing and Commissioning
⚡️ Monitoring of Full Load

Troubleshooting of Automatic Transfer Switch.

Findings : Back at normal power condition, generator does not shut off after its cool down.

Analysis : Timer of the Generator is not operating at its normal condition

After assesment, troubleshooting and simulation Automatic Transfer Switch is now operating in good good condition 💯

Acceptance Testing of Oil-filled Transfomer.
All test results are within its limit.
Transformer is ready for its energization.

Annual Thermal Scanning of Electrical Equipment.

✅ All hotspots were identified and corrected.
✅ All corrections were witnessed by authorized personels.
✅ All electrical equipment were cleaned and properly maintened.