e-Build Boards and Electronics

"✅MAX9814 Microphone AGC Amplifier Board Sound sensor Module

✅Specifications:

- Supply Voltage: 2.7v-5.5v @ 3mA current
- Output: 2Vpp on 1.25V bias
- Frequency Response: 20Hz - 20KHz
- Programmable Attack and Release Ratio
- Automatic gain, selectable max from 40dB, 50dB or 60dB
- Low Input-Referred Noise Density of 30nV/
- Low THD: 0.04% (typ)"

"✅AHT20+BMP280 Temperature, Humidity and Air Pressure Module

This product consists of new AHT20 and BPM280 digital temperature and humidity sensors, with a 12C main output and support for simultaneous online access to multiple 12C electronic devices or modules
It can use a DC voltage of 2.8V-5V, with easy voltage adaptation, low power consumption, simple circuit, and accurate temperature measurement points. Stable and fast transmission speed
Connect using a 4P GROVE Test cable, making it convenient for users to use quickly
Size: 15 * 15mm
Working voltage: DC20-5V

✅Product features:

1: Simple circuit
2: Accurate temperature measurement points
3: Stable and fast transmission speed
4: Easy voltage adaptation and low power consumption
5: Easy to understand"

"✅FSR402 Pressure Force Sensor FSR 402 Sensitive Resistor 100g to 10kg

✅Features:
FSR402 a light weight, small size,ultra-thin resistive pressure sensor.This kind of pressure sensor is to take place in FSR film sensor area pressure into the change of the resistance value, thus for pressure information.The lower the pressure, the greater the resistance.Allow its use in place of pressure 100 g - 10 kg.The terminal holder sensor can be used in the manipulator with or without holding items, robot first step walk the ground sensors, mammals bite test of biological experiments, application scope and widely."

"✅ESP32 Expansion Board

✅ESP32 Super Breakout Board Expansion Board 3 Types Outputs for ESP32 Module ESP-WROOM-32 ESP32 Block PCB

✅Features:
1.Applicable to ESP32-DevKitC (30P) series expansion board
2.Extensive compatibility: Please confirm that the pin width of your esp32 board matches the pin width of the leakage board
3.The module is safe, reliable, expandable and suitable for various applications.
4.Support DC (6.5-12V) power supply or USB (5V) power supply, stable and reliable, providing good contact and stable signal transmission for your esp32 board
5.Expanding GVS interface facilitates access to various electronic module sensors, while creatively designing JUMP interface, which is very useful for you to reuse all pins, and is very suitable for users to reuse all pins in diy projects.

✅Parameters:
Expansion board model: ESP32-DevKitC (30P) series expansion board
Support DC (6.5-12V) power supply or USB (5V) power supply
Expand GVS interface to facilitate access to various electronic module sensors, and creatively design JUMP interface,
Default jumper cap can be provided to select 5V or 3.3V GVS output power supply, which is more convenient for matching external 5V electronic module sensors.

✅Interface description:

1. Power indicator PWR
2. USB 5V power supply input interface
3. DC 6.5-16V power supply input interface
4. I2C expansion interface (two groups)
5. Development board IO expansion interface (GVS interface)
6. Development board installation interface
7.5V/3V output interface
8.Jump interface [select 5V or 3.3V V voltage]
Package include：
1X development board expansion board"

"✅6-30V Relay Module Switch Trigger Time Delay Circuit Timer Cycle Adjustable

✅Product introduction:
1. Operating voltage: 6--30V
2. Trigger Signal Source: High Level Trigger (3.0 V-24 V), signal ground and system ground are not common, which can increase anti-interference abilit
system (short circuit can also connect with a ground common)
3. Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
4. Optocoupler Isolation: improve the anti-interference ability, after the parameter setting, it will memory forever
Warning: Relay contact is passive and electricity production; 1 channel has the control function on / off
✅Operation mode:
P1: After triggered signal, power relay on time OP, then turn off; within the OP period following operation:
1) P1.1: signal being triggered again is not effective
2) P1.2: signal being triggered again, start time again
3) P1.3: signal being triggered again, reset; disconnect relay, stop timing
P2: giving the trigger signal, the time after shutdown relay CL power relay OP time; then timing, turn off the relay
P3.1: give the trigger signal after the power relay on time OP, CL shutdown time relay; then operating cycle above cycle gaive signal again, shutdown relay stop timing; cycle times (LOP) can be set
P3.2: after connecting. no need to trigger signal, power relay on time OP, CL shutdown time relay; then the operating cycle above timea cycle (LOP) can be set
Q4: keeping the function of the signal; if there is no trigger signal, the time will be canceled, relay stay connected; when the signal disappears, timing OP turn off the relay; over time, if no signal again, the time is cleared
✅Time interval:
0.1 s (minimum) ~ 999 min (maximum) continuously adjustable
how to choose the time interval:
in the selection of parameter set interface mode, and press the STOP button to select the time
# # #. if the decimal point is in some place, the time interval is s-1 999 s
xx. x is decimal place is ten, the time interval is 0.1 s 99.9 s-
x. x. x is the decimal point are all on, the time interval is 1 min-999 min
parameter Introduction: OP power over time, turn off time CL, LOP cycle times (1-999 times, ""---"" is unlimited cycle)
✅How to set the parameter:
1. First make sure relay operation mode
2. According to the operaiting relay mode, the main interface (power module will flash current operating mode; standard mode P1.1, then come intot main interface); long press SET key two seconds and then looen enter selection interface mode; by pressing UP, DOWN key to choose the mode setting
(P1.1 ~ P4)
3. After selecting the mode, press short SET to set the corresponding parameter, then the parameter you want to set will flash
(OP power in time; CL power off time; LOP cycle times, ""---"" is unlimited cycle ); by UP, DOWN to set the parameter value, support long press"

"✅Raspberry Pi Pico RP2040 Microcontroller Type C

Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. Key features include:
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom

Spefications:
✅Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
✅264KB of SRAM, and 2MB of on-board Flash memory
✅Castellated module allows soldering direct to carrier boards
✅USB 1.1 with device and host support
✅Low-power sleep and dormant modes
✅Drag-and-drop programming using mass storage over USB
✅26 × multi-function GPIO pins
✅2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
✅Accurate clock and timer on-chip
✅Temperature sensor
✅Accelerated floating-point libraries on-chip
✅8 × Programmable I/O (PIO) state machines for custom peripheral support"

"✅16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module Raspberry pi shield module servo shield

✅Description:
Want to make a hexapod walker? Maybe you're making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise PWM output. Your microcontroller has a limited number of PWM outputs, and you find yourself running out! Not with the Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface. With this pwm and servo driver breakout, you can control 16 free-running PWM outputs with just two pins! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these beauties for up to an outstanding 992 PWM outputs.

✅Features:
Dimensions：2.5"" x 1"" x 0.1"" (62.5mm x 25.4mm x 3mm)
This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
Terminal block for power input (or you can use the 0.1"" breakouts on the side)
Reverse polarity protection on the terminal block input
Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1"" so you can only stack 4 next to each other on 0.1"" header
""Chain-able"" design
A spot to place a big capacitor on the V+ line (in case you need it)
220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
Solder jumpers for the 6 address select pins
i2c-controlled PWM driver with a built in clock. Unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Configurable push-pull or open-drain output
Output enable pin to quickly disable all the outputs

(1)Drive board connected to Arduino:
The PWM driver board uses the I2C method, so only four lines can be connected to the Arduino device:
""Classic"" Arduino pin mode:
+ 5v -> VCC
GND -> GND
Analog 4 -> SDA
Analog 5 -> SCL

Old Mega pin way:
+ 5v -> VCC
GND -> GND
Digital 20 -> SDA
Digital 21 -> SCL

R3 and later Arduino pin method (Uno, Mega &
Leonardo):
(These boards have dedicated SDA and SCL pins)
+ 5v -> VCC
GND -> GND
SDA -> SDA
SCL -> SCL

VCC pin is only for the chip power supply, if you want to connect the servo or LED lights, use the V + pin power supply, V + pin supports 3.3 ~ 6V power supply (chip safe voltage 5V). It is recommended to connect the external power supply via the power supply terminal."

"Item: ZB2L3 Battery Capacity Tester Module

✅Description
ZB2L3 Battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650
Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results
Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge
Maximum capacity statistics support 9999Ah (9999000mAh)
Automatically identify and develop appropriate battery termination voltage can also be manually adjusted

✅Specifications
Power supply voltage: DC4.5-6V (micro USB connector)
Operating Current: less than 70mA
Discharge voltage: 1.00V-15.00V 0.01V resolution
Termination voltage range: 0.5-11.0V
Supported by current: 3.000A 0.001A resolution
Maximum voltage measurement error: 1% + 0.02V
Maximum current measurement error: 1.5% + - 0.008A
Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X. # # #, as shown above to achieve 10Ah XX.XX, and so on.
Board size: 50mmX37mm

✅Instructions
1. The first test should be fully charged battery.
2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage.
3. Direct start test need only one press of the ""OK"" button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing ""+"" or ""-"" buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the ""OK ""start testing.
4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press ""OK"" to terminate flashing allows stable data display, press again ""OK"" button to return to the power-on state can just replace the battery test the next section

Error codes and their meanings:
Err1: battery voltage is above 15V
Err2: battery voltage is lower than the termination voltage
Err3: Battery can not afford to load or discharge current line too much resistance
Err4: overcurrent (current exceeds 3.1A)

✅Package Included:
1Pc x battery capacity tester
2Pc x Load resistors

We provide COD via the Maxim app or the option to pick up the item from our stores.

RecorTech Physical Stores

✅Consolacion Branch -> Consolacion Public Market Terminal.
Google Map-> https://cutt.ly/recortech-consolacion-branch
Open Monday to Saturday - 9am to 5pm
436-5251 / 0915-858-3075

✅Liloan Branch -> Cebu N Rd. Highway Yati Liloan.
Google Map-> https://cutt.ly/recortech-liloan-branch
Open Monday to Sunday - 9:30am to 6:30pm
407-6843 / 0956-228-7610

✅Lapu-Lapu Branch -> Basak-Cagodoy-Bankal-Buaya Rd, Lapu-Lapu City.
Google Map-> https://cutt.ly/recortech-lapu-lapu-branch
Open Monday to Sunday - 9am to 8pm
503-9971 / 0960-313-8672

e-Build Online Shop (Available also in all RecorTech Stores)

✅e-Build Boards and Electronics for DIY Board and Electronics!
Please Visit! https://www.facebook.com/ebuildelectronics

7-day warranty for factory defects; no returns for change of mind.
Prompt replies during store hours (9:00am-8:00pm).
Inquiries outside of store hours will be addressed the following day."

"Item: Battery Low Voltage Disconnect Module

✅XH-M609 Low Voltage Disconnect Switch Cut Off 12V 24V 36V Digital LED Display Over-Discharge Protect for 12-36V Lithium Battery

✅Description:
1. Name: Battery over-discharge protection module
2. Model: XH-M609（HCW-M635）
3. Input voltage: DC12-36V
4. Display accuracy: 0.1V
5. Control accuracy n: 0.1V
6. Voltage error: +/-0.1V
7. Scope of application: 12-36 lithium battery
8.The output voltage is equal to the input voltage
9. Product size: 57*42*19mm

- Programmable battery low voltage disconnect switch for DC 12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.
- On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation
- When the battery voltage reach the setting values, the module will disconnect load automatically to avoid the battery from over discharging to prolong the battery lifetime
- Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off.

✅Specifications:
- Input Voltage Range: DC 12-36V
- Control Accuracy: 0.1V
- Compatible Battery: lead acid, lithium ion battery, solar panel battery
- Board Size: 57 X 42 X 19mm (L*W*H)

We provide COD via the Maxim app or the option to pick up the item from our stores.

RecorTech Physical Stores

✅Consolacion Branch -> Consolacion Public Market Terminal.
Google Map-> https://cutt.ly/recortech-consolacion-branch
Open Monday to Saturday - 9am to 5pm
436-5251 / 0915-858-3075

✅Liloan Branch -> Cebu N Rd. Highway Yati Liloan.
Google Map-> https://cutt.ly/recortech-liloan-branch
Open Monday to Sunday - 9:30am to 6:30pm
407-6843 / 0956-228-7610

✅Lapu-Lapu Branch -> Basak-Cagodoy-Bankal-Buaya Rd, Lapu-Lapu City.
Google Map-> https://cutt.ly/recortech-lapu-lapu-branch
Open Monday to Sunday - 9am to 8pm
503-9971 / 0960-313-8672

e-Build Online Shop (Available also in all RecorTech Stores)

✅e-Build Boards and Electronics for DIY Board and Electronics!
Please Visit! https://www.facebook.com/ebuildelectronics

7-day warranty for factory defects; no returns for change of mind.
Prompt replies during store hours (9:00am-8:00pm).
Inquiries outside of store hours will be addressed the following day."

"Item: Mini Digital Voltmeter Ammeter Dual Display 0-100V 100A with Shunt

✅DC0-100V 100A Digital Voltmeter Ammeter 2 in1 Multimeter DC4-30V Voltage Ampere Meter Volt Amp Gauge Panel Dual Display
with Shunt

✅100A voltage and current meter is equipped with an external shunt.

✅Technical Parameters:
Voltage measurement range: 0.0V-100V
Current test range: 0-10A, 0-100A
Power supply range: DC4-30.0V (Note: If the voltage exceeds 30V, an external independent power supply is required)
Voltage error: ± 0.1%
Current error: ± 1%
External shunt specifications: 75 mOhm
Working current: Consolacion Public Market Terminal.
Google Map-> https://cutt.ly/recortech-consolacion-branch
Open Monday to Saturday - 9am to 5pm
436-5251 / 0915-858-3075

✅Liloan Branch -> Cebu N Rd. Highway Yati Liloan.
Google Map-> https://cutt.ly/recortech-liloan-branch
Open Monday to Sunday - 9:30am to 6:30pm
407-6843 / 0956-228-7610

✅Lapu-Lapu Branch -> Basak-Cagodoy-Bankal-Buaya Rd, Lapu-Lapu City.
Google Map-> https://cutt.ly/recortech-lapu-lapu-branch
Open Monday to Sunday - 9am to 8pm
503-9971 / 0960-313-8672

e-Build Online Shop (Available also in all RecorTech Stores)

✅e-Build Boards and Electronics for DIY Board and Electronics!
Please Visit! https://www.facebook.com/ebuildelectronics

7-day warranty for factory defects; no returns for change of mind.
Prompt replies during store hours (9:00am-8:00pm).
Inquiries outside of store hours will be addressed the following day."

"✅ESP32 OV2640 Camera Module CMOS Image Sensor Module 2 Million Pixel Wide Angle Camera Monitor Identification Lens For Arduino

✅Product Features:
The OV2640 is a 1/4-inch CMOS UXGA (1632*1232) image sensor. The sensor's small size and low operating voltage provide all the features of a single UXGA camera and image processor.
Through the SCCB bus control, it can output 8/10-bit image data of various resolutions such as full frame, sub-sampling, zooming and windowing. The UXGA image of this product can reach up to 15 frames per second (up to 30 frames for SVGA and 60 frames for CIF). Users have complete control over image quality, data format and transmission.
All image processing functions including gamma curve, white balance, contrast, chroma, etc. can be programmed via the SCCB interface. Image Sensors use unique sensor technology to improve image quality and reduce sharp and stable color images by reducing or eliminating optical or electronic defects such as fixed pattern noise, smearing, and floating.

Note: This camera module only leads to some pins of the CSP package sensor chip and an optical lens. Without integrated peripheral components, it needs to be designed by itself."

"New AT24C256 24C256 I2C interface EEPROM Memory Module for arduino

✅Onboard 8P-chip carrier, can support AT24C256 series chips;
✅Pin power supply, on-board power indicator;
✅on-board pull-up resistor for I2C communications required ;
✅All pins leads out and be marked, the address input and the write-protect pin direct jumper settings;
✅PCB board size: 36.5 (mm) x12 (mm)"

"✅Digital Hygrometer Thermometer

✅Specification:
Temperature Range: -50 -70°C
Temperature Accuracy: ±1°C
Measuring Humidity Range: 10% RH -99% RH
Humidity Accuracy: ±5%
Humidity Display Resolution: 1% RH
Operating Voltage: 1.5V, or LR44 batteries (Not Included)
Sampling Period: 10S
Dimension: approx. 48 x 28.5 x 15.2mm
LCD Dimension: approx. 40 x 22.5mm
Installation dimensions: approx. 46 x 27 x 13.5mm
Color: Black/White"

"✅Product Name : Capacitive Proximity Switch

;Switch Appearance Type : Cylinder Type
Theory : Capacitance Sensor;Output Type : NPN NO(Normal Open);Diameter of Head : 18mm;Detecting Distance : 1-10mm
Detecting Object : Metal or Nonmetal Material;Supply Voltage : DC 6-36V;Current Output : 300mA;Response Frequency : 100Hz
Size : 7.5 x 4cm/3"" x 1.6"" (L*Max. Dia);Material : Plastic, Alloy
It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
When proximity switch is close to some target object, it will send out control signal.
As it is capacitive type proximity switch, its detecting object target is not limited to only conductor, but also liquid and even powder things, like plastic, water, glass, oil, etc.
It's widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial ect.
Package Content : 1 x Capacitive Proximity Switch
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm."

"140pcs U Shape Solderless Breadboard Jumper Cable Wire Kit For PCB Bread Board with box

Description

✅Color: red, orange, yellow, green, blue, purple, gray, brown, white.
(please notice: sometimes the color may diffierent,thanks)
✅Box size: 165 × 55 × 10mm;
✅length of the line is not the same length, the length of the line, a total length of 14 length 10 each, a total of 140
✅140 pcs of 22 AWG solid wires
✅Including length: 2,5,7,10,12,15,17,20,22,25,50,75,100, and 125 mm"

"This Arduino UNO R3 Acrylic Case is made of high acrylic, which provides excellent protection, with good appearance. This is designed for the Arduino UNO R3 with holes for pins, so connection to other components is easy.

Note: Arduino UNO R3 is not included. Sold separately

Features:
3mm acrylic
Light and easy to transport
good heat dispersion
Dimensions: 80mm x 65mm

Package Included:
Arduino Acrylic Case Set
Mounting Screws and Nuts"

"LJ12A3-4-Z/BX Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm normally open proximity switch

100% Brand New
Voltage: DC 6-36V
Output current: 300mA
3 Wire
Polarity: NPN
Dimention: M12x10x55mm
Detection Distance: 4 mm
Ouput Status: Normally Open
Part number: LJ12A3-4-Z/BX
Detection objects: Conductor"

"MAX7219 Dot Matrix Module 8x8

Available in Color Red, Green and Blue

LED Display Control Module Kit

✅Description:
1. single module can drive the an 8 * 8 dot matrix common cathode
2. the module Operating voltage: 5 v
3. dimensions: length 3.2 cm X 3.2 cm wide X 1.3 cm high
4. holes with four screws, the diameter of 3 mm
5. modules with input and output interfaces, support for cascading multiple modules

✅Wiring instructions:
1. on the left block to an input port, the an output port on the right.
2. the When the control of a single module, simple enter the port received a CPU The When wining
3. modules cascaded output input termination CPU, the input output termination module of the first two modules of the first one, the first two modules of the termination input terminal of the three modules, and so.

VCC → 5V
GND → GND
DIN → P2.0
CS → P2.1
CLK → P2.2
"

"3S 20A Li-ion Lithium 18650 Charger PCB BMS Protection Board 12.6V Cell 64x20x3.4mm Module

✅Features:
Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB Board
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)
Product Size: 64mmx20mmx3.4mm
Material:Metal
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W"

"Material: PCB
Font size guide, trace-width diagram, and a set of AWG-sized drills
Centimeter side: 0.1cm marks"

"Mini Digital Voltmeter Ammeter Dual Display 0.28 inch 0-100V

Features:
✅Size: 48mm x 29mm x 21mm.
✅Display color: Red & Blue LED (dual display).
✅Display: 0.28"" LED digital.
✅Operating voltage: DC 4.5 ~ 30V.
✅Measure voltage: DC 0 ~ 100V.
✅Minimum resolution (V): 0.1V.
✅Refresh rate: ≥500ms / times.
✅Measure accuracy: 1% (± 1 digit).
✅Minimum resolution (A): 0.01A.
✅Operating Current:

"Item: Backup Battery Switching Module 12V 150W

12V 150W 12A Backup Battery Switching Module high power Board Automatic switching battery power

Name : Storage battery emergency switch module
Control voltage:DC 12V
Control current:12A
Support power:150W
PCB Size:53.8*26.9mm
Net wight:30g

This module is for storage battery emergency switch.

It adopts the high quality industrial relay and the effective control current can reach 12A. In control of 12V, power can reach 150W. It is widely used in incubators, computers, networks and so on.

After the 12V adapter and the battery are connected to the circuit, when the 12V adapter has power, it will give priority to the adapter to supply power (green light), and when the adapter stops power supply, it will automatically switch to battery power (red light), so as to achieve uninterrupted power supply!

We provide COD via the Maxim app or the option to pick up the item from our stores.

RecorTech Physical Stores

✅Consolacion Branch -> Consolacion Public Market Terminal.
Google Map-> https://cutt.ly/recortech-consolacion-branch
Open Monday to Saturday - 9am to 5pm
436-5251 / 0915-858-3075

✅Liloan Branch -> Cebu N Rd. Highway Yati Liloan.
Google Map-> https://cutt.ly/recortech-liloan-branch
Open Monday to Saturday - 9am to 7pm
Open Sunday 9am to 5pm
407-6843 / 0956-228-7610

✅Lapu-Lapu Branch -> Basak-Cagodoy-Bankal-Buaya Rd, Lapu-Lapu City.
Google Map-> https://cutt.ly/recortech-lapu-lapu-branch
Open Monday to Sunday - 8am to 8pm
503-9971 / 0960-313-8672

e-Build Online Shop (Available also in all RecorTech Stores)

✅e-Build Boards and Electronics for DIY Board and Electronics!
Please Visit! https://www.facebook.com/ebuildelectronics

7-day warranty for factory defects; no returns for change of mind.
Prompt replies during store hours (8:30am-8:00pm).
Inquiries outside of store hours will be addressed the following day."

"Sweep Hand Sensor Switch Module DC 5V-24V 12V Short Distance Scan Sensor 72W 3A Constant Voltage for Auto Smart Home

Specifications:
Model: XK-GK-4010A
Operating voltage:
Input: 12 V
output: 12 V
Output type: Double output
Detection range: adjustable 10-50 MM
Detection principle: distance
Power load: 36 W
Delayed off time: none
Field of application: DC, constant pressure
Load current: 3A optional
Standby current: 10mA
VIN: 12V

Features:
The use of electrical appliances, such as small household appliances, KTV VOD system,
Automotive industrial application systems and other electrical devices wide range of guests can accept custom special features;
The sensitivity of the product can be customized, can pe*****te plastic, acrylic, glass, ceramic, and other non-metallic medium, stable performance!

Instructions:
AC use: Need to apply reactive rectifier for it is DC, constant pressure.
During installation, make sure that the medium insulation and tactile surface are tightly coupled and fixed!
There shoule no gap! Installed and then power, wait 3 seconds after initialization, it may be normal operation!

2. Recommended method of installation:
The first, the shell design a card slot, the touch button can be put in firmly locked.
The second, the use of hot melt adhesives, the touch button and shell close to the adhesive hot melt can be used to live.
The third, the use of double-sided adhesive, directly touch the stickers inside the shell."

"Speaker Horn 3W 4R Diameter 4CM Mini Amplifier Rubber Gasket Loudspeaker Trumpet 3W 4ohm 40mm

✅Specification
Type: Electric (moving coil)
Use: Amplify
Shape: round
Composition: single
Rated power: 3 (W)
Rated impedance: 4 (Ω)
Frequency Response: 170 (kHz)
Directivity: all
Sensitivity: 100 (dB/W)
Sex-to-noise ratio: 1 (dB)
Harmonic Distortion: 1 (TMD%)
Specification:
Maximum diameter 4CM
Magnet part diameter 1.7CM
Thickness 2CM"

"EZP2019 High Speed USB SPI Programmer Support 32M Flash 24 25 93 EEPROM 25 Flash bios Win7 Win8

Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life.

✅Features:
Appliance repairing: suitable for the appliance repairing industry to flash color TV, DVD, computer motherboard, hard disk memory chips.
Product development: the test chip is programmed during the company's product development process.
Factory mass production: the fully automatic offline copy function is especially suitable for factory batch burning of memory chips.
USB 2.0 interface, speed up to 12Mbps.
The reading and writing speed is fast. It takes only 3 seconds to read EN25T80 and 9 seconds to write EN25T80. It is the fastest BIOS chip programmer on the market.
Automatic identification of the chip model.
Automatically check if the chip is placed.
Automatically select the chip supply voltage.
Automatic offline copy.
Support PC software and programmer firmware upgrade.
Full support for 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM and other memory chips.
Small size, easy to carry, and almost the same as a regular business card.

✅Specifications:
Material: ABS+PCB
Type: 1-3 (optional)
USB interface: USB 2.0 interface
Support 24/25/26/93 series chips
Programmer size: 71 * 44 * 19mm / 2.8 * 1.7 * 0.7in
Programmer weight: 37g / 1.3ounce"