Denz Customized

E-loading KIOSK board for Dafox and LPB marame po tayo onhand stocks. Sa mga nagtatanong po ng price nasa mismong posted picture na po ang price.
For bill acceptor para mag work sa ating board sundan nyo yung switch ng bill acceptor na nasa diagram posted para mag work ng maayos ang bill acceptor.

For orders just pm lang po sa page natin.

Orange Pi Zero3 shield board
Message us for order.

WiFi5 Wired/Wireless sub vendo board stocks onhand.
PM lang po sa mga need.

Available Customized Boards natin guys.
Pm lang po for orders.

Custom board update stocks po.
Shopee: shopee.ph/denzcustomized
Lazada: https://www.lazada.com.ph/shop/denzcustomized

𝕁𝕌𝔸ℕ𝔽𝕀 𝕂𝕚𝕠𝕤𝕜 ℂ𝕦𝕤𝕥𝕠𝕞 𝔹𝕠𝕒𝕣𝕕 meron na po tayo release guys tested na po eto nang mismong developer at ibang builders.
https://s.lazada.com.ph/s.9HNXn
https://ph.shp.ee/Y8CvyBk

Features
1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
2. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na boltahe na surge.
3. SMART CHARGING = for charging ng tablet eto which means mag-auto ON or OFF depende sa settings mo.
4. NIGHT LIGHT = eto ay na seset sa admin panel kung saan kung kelan mo lang buhayin at patayin ang ilaw(optional po eto pwedeng no need na eto).
5. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
6. OPTO ISOLATOR FOR COIN & BILL PIN = it means optocoupler na gamit natin to drive pulse para maiwasan yung noise ng signal pins upon insert coin/bill mode, especially kung meron inductive load na malapit sa vendo para maiwasan pa lalo ang ghost credit.
7. POWER CUT COINSLOT FUNCTION = it means wala po talaga power si coinslot saka lang sya magkaroon power once in insert coin mode or yung indicator is kulay green.
8. BILL ACCEPTOR FUNCTION = para naman eto sa mga gumagamit ng bills / perang papel.
9. CHARGING FUNCTION = charging pin outs ready para sa mga gusto magkaroon charging station for gadgets.
10. HOPPER FUNCTION = hopper pin outs ready.
11. PRINTER FUNCTION = supported only 12V thermal printer TTL type.
12. COMPATIBILITY = compatible lang eto sa Juanfi Kiosk system.

NOTE: PIN SETTINGS IS AT THE BACK OF CUSTOM BOARD

Package Include:
1 x Juanfi Kiosk custom board
1 x ESP32 38pins (preflashed to latest version)
1 x ethernet module (W5500 mini)
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

Update sa ating 𝕌𝕟𝕚𝕧𝕖𝕣𝕤𝕒𝕝 ℂ𝕦𝕤𝕥𝕠𝕞 𝕓𝕠𝕒𝕣𝕕 may stocks na po, tapusin lang namin tests. Pa-wait nalang po dun sa mga may orders ha. Thank you. Pasensya na sa delays.
https://shope.ee/6fEhnlVPCV
https://s.lazada.com.ph/s.7zZ8s

Wireless custom board for Pisowifi | Shopee Philippines Buy Wireless custom board for Pisowifi online today! Wireless custom board Features 1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad. 2. SURGE PROTECTION DEVICE = upang protektahan an...

Wired custom board for Pisowifi | Shopee Philippines Buy Wired custom board for Pisowifi online today! Wired Sub Vendo Custom Board Features 1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad. 2. SURGE PROTECTION DEVICE = upang protektaha...

𝕎𝕚𝕗𝕚5 𝕤𝕦𝕓 𝕧𝕖𝕟𝕕𝕠 𝕔𝕦𝕤𝕥𝕠𝕞 𝕓𝕠𝕒𝕣𝕕 may stocks na po tayo pwede na po kayo mag-place ng order. Take note naka pre-order po muna tayo dahil ongoing test at holiday lang tayo pero after holiday ship na po namin yan.
https://shope.ee/4VADDhRzdk

Custom board stocks update.
https://www.lazada.com.ph/shop/denzcustomized
https://shopee.ph/denzjohn

Custom board for JuanFi (wired) | Shopee Philippines Buy Custom board for JuanFi (wired) online today! JUANFI custom board (wired / wireless) Features 1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad. 2. SURGE PROTECTION DEVICE = upang....

𝔽𝕆𝕏 𝔼-𝕝𝕠𝕒𝕕𝕚𝕟𝕘 𝕔𝕦𝕤𝕥𝕠𝕞 𝕓𝕠𝕒𝕣𝕕 (android version)
shopee: https://shp.ee/qrrzpd8
lazada: https://s.lazada.com.ph/s.jDgaK

Features
1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
2. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na voltage surge.
3. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
4. OPTO ISOLATOR FOR COIN & BILL PIN = it means optocoupler na gamit natin to drive pulse para maiwasan yung noise ng signal pins upon insert coin/bill mode, especially kung meron inductive load na malapit sa vendo para maiwasan pa lalo ang ghost credit.
5. SMART CHARGING = it means when battery is 30% below saka lang po eto mag power ON then when battery naman reaches to 98% saka lang mag OFF
6. SET PIN COINSLOT FUNCTION = it means coinslot is always ON but hindi siya mag-aaccept ng coins kung walang transaction made sa machine
7. BILL ACCEPTOR FUNCTION = para naman eto sa mga gumagamit ng bills / perang papel.
8. INDICATORS = COIN for inserting coins, BILL for inserting bills, LED on logo for insert mode which GREEN then stand by mode if RED
9. COMPATIBILITY = compatible lang eto FOX E-loading android version only

Package Include:

A. custom board w/ module
1 x Fox E-loading custom board
1 x ESP32 30pins (preflashed to latest version) TB74 bill acceptor
1 x 5pin custom wire for Coinslot
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

B. custom board only
1 x Fox E-loading custom board
1 x 5pin custom wire for Coinslot
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

🔥IMPORTANT NOTICES🔥
👉We test first the item before we ship.

𝕎𝕀ℝ𝔼𝔻 𝕊𝕦𝕓 𝕍𝕖𝕟𝕕𝕠 ℂ𝕦𝕤𝕥𝕠𝕞 𝔹𝕠𝕒𝕣𝕕 latest design.
Lazada: https://s.lazada.com.ph/s.7zZ7b
Shopee: https://shope.ee/506T3Dh2Ey

Wired Sub Vendo Custom Board
Features
1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
2. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na boltahe na surge.
3. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
4. OPTO ISOLATOR FOR COIN & BILL PIN = it means optocoupler na gamit natin to drive pulse para maiwasan yung noise ng signal pins upon insert coin/bill mode, especially kung meron inductive load na malapit sa vendo para maiwasan pa lalo ang ghost credit.
5. POWER CUT COINSLOT FUNCTION = it means wala po talaga power si coinslot saka lang sya magkaroon power once in insert coin mode or yung indicator is kulay green.
6. BILL ACCEPTOR FUNCTION = para naman eto sa mga gumagamit ng bills / perang papel.
7. REBOOT BUTTON = pag natutulog ang ESP module nyo isang way eto para si client na mismo gumising ng ESP module pero optional po eto pwedeng wala kase nakadepende po sa config ng mikrotik nyo ang pagkatulog ng ESP.
8. INSERT COIN BUTTON = ang button na eto ay para sa pag generate ng voucher , depende kung merong LCD ang vendo (optional po eto).
9. INDICATORS = Status for connected na sa MAIN vendo si ESP/NANO module, Coin for inserting coins, Bill for inserting bills, LED for insert mode which GREEN then stand by mode if RED
10. COMPATIBILITY = compatible sa mga sumusunod na system, ADO / LPB / PISOFI / JUANFI at KITIFI

NOTE: PIN SETTINGS IS AT THE BACK OF CUSTOM BOARD

Package Include:
1 x Sub Vendo custom board
1 x Arduino Nano or Wemos D1 (preflashed to latest version)
1 x ethernet module (W5500 mini)
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

𝕎𝕚𝔽𝕚5𝕤𝕠𝕗𝕥 𝕊𝕦𝕓-𝕍𝕖𝕟𝕕𝕠 𝕔𝕦𝕤𝕥𝕠𝕞 𝕓𝕠𝕒𝕣𝕕 (𝕨𝕚𝕣𝕖𝕕 / 𝕨𝕚𝕣𝕖𝕝𝕖𝕤𝕤)
shopee: https://shope.ee/4VADDhRzdk
lazada: https://s.lazada.com.ph/s.7zZSb

As per request ng ibang customer na gumagamit ng 12V POE splitter / POE connector kaya nilapit na natin ang position ng LAN at DC jack for easy install ng 12V POE splitter

Features
1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
2. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na boltahe na surge.
3. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
4. POWER CUT COINSLOT FUNCTION = it means wala po talaga power si coinslot saka lang sya magkaroon power once in insert coin mode or yung LED indicator is kulay green.
5. SET-UP BUTTON = Ginagamit eto para sa pag bind ng esp module sa main vendo. Bago i-power ON ang custom board press and hold lang ang SET-UP button hanggang lumabas ang WiFi5ESP32 Setup or maging kulay green yung LED indicator sa custom board.
6. LED INDICATOR = LED for insert mode which GREEN then stand by mode if RED
7. LCD FUNCTION = eto ay display screen ng vendo, optional din eto pwedeng wala eto dahil meron naman screen na ang mga Cellphones / gadgets.
8. COMPATIBILITY = compatible lang eto sa WiFi5soft

NOTE: PIN SETTINGS IS AT THE BACK OF CUSTOM BOARD

Package Include:
1 x WiFi5 sub vendo custom board with lan 8720 embedded
1 x ESP32 38pins (preflashed to latest version)
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

𝕁𝕌𝔸ℕ𝔽𝕀 / 𝕂𝕀𝕋𝕀𝔽𝕀 𝕔𝕦𝕤𝕥𝕠𝕞 𝕓𝕠𝕒𝕣𝕕
https://shope.ee/506TobUxiC
https://s.lazada.com.ph/s.i5Nfe

May stocks na po ulit tayo guys. Latest version po eto at may mga enhancement tayong ginawa sa design at circuit.

JUANFI / KITIFI custom board (wired / wireless)
Features
1. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
2. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na boltahe na surge.
3. NIGHT LIGHT = eto ay na seset sa admin panel kung saan kung kelan mo lang buhayin at patayin ang ilaw(optional po eto pwedeng no need na eto).
4. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
5. OPTO ISOLATOR FOR COIN & BILL PIN = it means optocoupler na gamit natin to drive pulse para maiwasan yung noise ng signal pins upon insert coin/bill mode, especially kung meron inductive load na malapit sa vendo para maiwasan pa lalo ang ghost credit.
6. POWER CUT COINSLOT FUNCTION = it means wala po talaga power si coinslot saka lang sya magkaroon power once in insert coin mode or yung indicator is kulay green.
7. BILL ACCEPTOR FUNCTION = para naman eto sa mga gumagamit ng bills / perang papel.
8. PRINTER FUNCTION = supported by 12V thermal printer TTL type.
9. REBOOT BUTTON = pag natutulog ang ESP module nyo isang way eto para si client na mismo gumising ng ESP module pero optional po eto pwedeng wala kase nakadepende po sa config ng mikrotik nyo ang pagkatulog ng ESP.
10. INSERT COIN BUTTON = ang button na eto ay para sa pag generate ng voucher , depende kung merong LCD ang vendo (optional po eto).
11. INDICATORS = Status for connected na sa mikrotik si ESP module, Coin for inserting coins, Bill for inserting bills, LED for insert mode which GREEN then stand by mode if RED
12. LCD FUNCTION = eto ay display screen ng vendo, optional din eto pwedeng wala eto dahil meron naman screen na ang mga Cellphones / gadgets.
13. COMPATIBILITY = compatible lang eto sa Juanfi system (wired or wireless pwede). If wireless set up i-reflash nyo lang po sa ESP32 wireless firmware.

NOTE: PIN SETTINGS IS AT THE BACK OF CUSTOM BOARD

Package Include: CB+W5500+ESP32
1 x Juanfi custom board
1 x ESP32 38pins (preflashed to latest version 4.4)
1 x ethernet module (W5500 mini)
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw

𝕌ℕ𝕀𝕍𝔼ℝ𝕊𝔸𝕃 ℂ𝕌𝕊𝕋𝕆𝕄 𝔹𝕆𝔸ℝ𝔻 for pisowifi, eto na po may on hand stocks na po tayo.
Order here:
https://s.lazada.com.ph/s.7zZ8s
https://shope.ee/6fEhnlVPCV

Sa mga gusto mag reseller pm nyo lang po ako bigyan ko kayo big discount.

UNIVERSAL CUSTOM
Mga features / functions:
1. POWER ON DELAY 20 SECONDS = protection for brown out para pag biglang balik ng kuryente hindi agad agad mag power ang mismong pi board at maiwasan na din ang palaging corrupted ang sd card.
2. INPUT POWER REVERSE POLARITY PROTECTION = pag nag kamali ka nang wirings sa input, like yung 12V polarity nagka baligtad ay hindi siya mag power ON dahil baligtad.
3. SURGE PROTECTION DEVICE = upang protektahan ang circuit mula sa mataas na boltahe na surge.
4. ALTERNATIVE PINS = kung sira na yung default pins eto ay pwede magamit, SW1 switch eto na pwede mong ON base sa label nya na COIN at RELAY at need mo baguhin sa admin panel base sa nakasulat na pin.
5. NIGHT LIGHT = eto ay na seset sa admin panel kung saan kung kelan mo lang buhayin at patayin ang ilaw(optional po eto pwedeng no need na eto) night light or timer pheriperal depende sa system na gamit mo.
6. SMART FAN CONTROL = eto ay available pa lang sa ADOPISOFT system, once na reach nya yung naka set na HIgh temperature mo saka lang iikot yung fan then pag na reach naman nya yung naka set mo mababang temperature titigil naman ikot ng fan.
7. RGB LED FRAME FUNCTION = eto ay para dun sa pailaw na RGB led for coinslot 3 wires or 2 wires supported.
8. POWER CUT COINSLOT FUNCTION = it means wala po talaga power si coinslot saka lang sya magkaroon power once in insert coin mode or yung indicator is kulay green.
9. BILL ACCEPTOR FUNCTION = para naman eto sa mga gumagamit ng bills / perang papel.
10. COMPATIBILITY = pwede po eto sa Orange pi One, Orange Pi PC, Orange Pi 5, Raspberry pi 3 at Raspberry pi 4.

Mga kasama sa package:
1 x Pisowifi custom board v7.0
2 x pcb hex brass stand off
4 x motherboard spacer L-type
4 x m3 x 6 bolt
4 x #6 x 1/2" wood screw
1 x heatsink for pi (14mmx14mmx6mm)

Sa mga naghahanap ng bill acceptor meron po tayo stocks.

pm lang po