CIG
Customization & innovation for collectors by collector, including FX, installations & prop runs.
"SOLD" 🤩 Here is the video for the KR x OR ROTJ V2 crystal chamber version, with proffie board V2 & neopixel set up, chassis from Goth3D and weathering paint work by CIG.
🛒Also available at Etsy 👇🏻
https://www.etsy.com/sg-en/listing/1096989848/star-wars-kr-crystal-chamber-rotj-luke?ref=shop_home_active_1&frs=1
📍Below are the specs details:
- Weathering & paint work by CIG
- Trooper Trent (weathering stencil)
- Chassis Goth 3Design
- Proffie V2 OS5.9
- 3 X Kyberphonic Luke soundfonts and 3 x music SW sound tracks
- Color changing features for blade and crystal.
- 18650 battery housing
- 28mm Speaker
- TCSS Neopixel PCB
- Free Blade 40" x 144 Neopixel custom-made
- Real apple green quartz with Neopixel.
29/10/2021
"SOLD" 🤩Finally completed this installation, the KR x OR ROTJ V2 crystal chamber version using proffie board V2 & neopixel set up, chassis from Goth3D and weathering paint work by CIG. Video will follow shortly.
🛒Also available at Etsy 👉🏻
https://www.etsy.com/sg-en/listing/1096989848/star-wars-kr-crystal-chamber-rotj-luke?ref=shop_home_active_1&frs=1
📍Below are the specs details:
- Weathering & paint work by CIG
- Trooper Trent (weathering stencil)
- Chassis Goth 3Design
- Proffie V2 OS5.9
- 3 X Kyberphonic Luke soundfonts and 3 x music SW sound tracks
- Color changing features for blade and crystal.
- 18650 battery housing
- 28mm Speaker
- TCSS Neopixel PCB
- Free Blade 40" x 144 Neopixel custom-made
- Real apple green quartz with Neopixel.
😱😍That switch you could only dream of! It's finally here, after years of R&D! Presenting to you, our first !
🔸Specs below:
- Neopixel combination with crystal clear 5mm LED (3-5 volt)
- Built in Momentary switch
- PLA 3D printed parts
- 5 x 20cm AWG32 wire pre-tinned for easy soldering
- Free 330 ohm or 470 ohm 1/4 watt resistor for data control signal (while stocks last)
- 8mm Hex nut & washer included
- Chrome Bezel housing
- Drill hole 7.2 mm or 5/16"
- Threading M8x0.75
Check out here 👉🏻 https://www.etsy.com/sg-en/shop/CosmicInterGalactic?ref=seller-platform-mcnav
03/08/2021
"SOLD" Hi everyone! This is a 89 Saber Mace Windu Lightsaber with 3D printed chassis. (Economic basic setup)
Below are the specs details:
- Proffie V2 OS5.7
- Activation and Auxiliary switch near emi
- 3 X Mace Windu soundfonts and sound tracks
- 18650 Removeable battery housing (Battery not included)
- 22mm Speaker
- TCSS Neopixel PCB
- 7/8" blade holder
- Neopixel blade plug (TCSS PCB)
chassis
20/06/2021
to all the dads, in the galaxy and beyond.
(SOLD) 🔈Here’s the video you guys wanted, the 89 Saber ROTJ Darth Vader Lightsaber with Goth 3Design Chassis!
▪️ CIG artwork paint work and copper wire mesh install on chassis
Proffie V2 OS5.7
Soundfonts
▪️ 3 x Darth Vader
Sound tracks
▪️ 2 x Star wars sound tracks
▪️ 1 x Imperial March
Neopixel Blue blade effect
▪️ 3 x Red Blade
1 x strip neopixel (Strobe effect )
KR 28mm Brass speaker
CC saber Neopixel PCB
Removable - Keep power18650 battery
Sold with free DHL shipping and PayPal fee included.
09/05/2021
A mother’s love is patient and forgiving when all others are forsaking, it never fails or falters, even though the heart is breaking. Kudos to moms all over the world.🌷
Artist unknown.
04/05/2021
"Do. Or Do Not. There Is No Try." May the force be with you, always! Happy May 4th!
29/04/2021
《SOLD》🔈Hello everyone! I have just completed a new saber! It is the 89 Saber ROTJ, Return of the Jedi Darth Vader Lightsaber with Goth 3Design Chassis!
SOLD with free DHL shipping and PayPal fee included.
▪️ CIG artwork paint work and copper wire mesh install on chassis
Proffie V2 OS5.7
Soundfonts
▪️ 3 x Darth Vader
Sound tracks
▪️ 2 x Star wars sound tracks
▪️ 1 x Imperial March
Neopixel Blue blade effect
▪️ 3 x Red Blade
1 x strip neopixel (Strobe effect )
KR 28mm Brass speaker
CC saber Neopixel PCB
Removable - Keep power18650 battery
Hi everyone, here’s the video of the Makers Prop Studio's Stainless Steel Graflex Empire Strikes Back Luke Skywalker Lightsaber with Goth 3Design Graflex Master Chassis. Brass & Rust weathering artwork on chassis is done by us CIG.
Selling USD2300 (DHL Shipping & Paypal fees all included)
Specs below:
* KR Saber Elite Graflex 1" Blade Holder
* High Speed polished Nickel Steel Chassis
* Polished Brass Crystal Chamber
* Real Clear Quartz crystal
* Proffie soundboard V2 OS5.7
Soundfonts
* 2 x Luke & Yoda
* 1 x Darth Vader sound tracks
* 2 x Star Wars sound tracks
* 1 x Imperial March Neopixel Blue blade effect
* 1 x Blue Blade
* 1 x Deep Sky Blue Blade
* 1 x Red Blade
* 1 x Neopixel accent (Crystal Chamber) Similar to blade color
* 1 x strip neopixel (Turbine effect)
* KR 28mm Brass speaker
* CC saber Neopixel PCB
* Keep power18650 battery
* Black storage case
* 3.7v Charger 2.1mm
13/04/2021
Hi everyone, it’s been a while! I have just finished a Makers Prop Studio's Stainless Steel Graflex Empire Strikes Back Luke Skywalker Lightsaber with Goth 3Design Graflex Master Chassis. Brass & Rust weathering artwork on chassis is done by us CIG.
Selling USD2300 (DHL Shipping & Paypal fees all included)
Specs below:
* KR Saber Elite Graflex 1" Blade Holder
* High Speed polished Nickel Steel Chassis
* Polished Brass Crystal Chamber
* Real Clear Quartz crystal
* Proffie soundboard V2 OS5.7
Soundfonts
* 2 x Luke & Yoda
* 1 x Darth Vader sound tracks
* 2 x Star Wars sound tracks
* 1 x Imperial March Neopixel Blue blade effect
* 1 x Blue Blade
* 1 x Deep Sky Blue Blade
* 1 x Red Blade
* 1 x Neopixel accent (Crystal Chamber) Similar to blade color
* 1 x strip neopixel (Turbine effect)
* KR 28mm Brass speaker
* CC saber Neopixel PCB
* Keep power18650 battery
* Black storage case
* 3.7v Charger 2.1mm
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Website
Address
Woodlands