Abilene Diesel Performance
Abilene's leading Diesel Performance and Repair Shop, as well as custom exterior and interior builds
![Power Management](https://img3.findglocal.com/085/165/1074778560851652.jpg)
We are proud to announce that we are now a dealer for ECUMaster USA They have some of the best products we have looked at. Absolutely love there Power Management Units (PMU's) they can completely get rid of all your fuses and relays with a digital setup that is can bus so you can really dial in exactly what you want on and when. Want to add Nitrous? it can PWM nitrous solenoids as well. There products are the best investment for any custom project or race truck. You can use it to operate wiper blades, have it auto turn on a second fuel pump, shut down the car if temp exceeds threshold or loos of oil pressure, use it as a trans brake, control shift points based on RPM's and speed, turn on signals, hazards, defrost, the possibilities are endless. They also have an awesome screen and a can switch panel. So many things you can do with these products. And with it all being can network there is way less wiring to do. Will also data log. Let us know if you have questions or if we can set you up.
![](https://img4.findglocal.com/845/378/1065423858453789.jpg)
Wagler Competition Products deckplate motor we got in today for Tanner Thompson race truck build we’ve been working on. Can’t wait to hear it run
![](https://img3.findglocal.com/888/131/1061148578881317.jpg)
We are still Hiring!!
Wanting to get into the world of Diesel repair and performance? Get to travel to big diesel events around the country? Be a part of our race team? Now is your chance to join our team. Come by the shop and put in an application
Looking for motivated techs that want to join our team. Must have own tools, prefer at least some experience in automotive repair field, and be willing to work.
Stop by and see us
Working on idle and spool up tonight
Rowdy Performance and Machine
Kill Devil Diesel
Titan Turbo Service
Opti-Lube Additives & Lubricants
Warren Diesel Injection LLC
![](https://img5.findglocal.com/131/513/936810431315133.jpg)
Dyno is up and ready we start runs at 12:00. Come sign up now at the Dyno at
![](https://img3.findglocal.com/001/878/883107280018782.jpg)
Headed to NHRDA (National Hot Rod Diesel Association) world finals. Stop by and see us if your coming
![Photos from Abilene Diesel Performance's post](https://img3.findglocal.com/063/065/876988590630651.jpg)
Look at what we found in this exhaust. I don’t think that belongs there. Time for a turbo bud!
Best Diesel Repair and Performance
📱325-672-9056
📩[email protected]
facebook.com/AbileneDieselPerformance/
📆M-F 8️⃣-5️⃣
![](https://img3.findglocal.com/399/732/876655163997327.jpg)
Idk who did this but they should put down the wrench. IYKYK
![](https://img5.findglocal.com/405/513/876077064055137.jpg)
Don’t mind us just doing 6.4 things
![](https://img3.findglocal.com/756/337/874328037563373.jpg)
You VS. the guy she tells you not to worry about 😂
A little Mishimoto Automotive trans cooler upgrade on this today. Massive improvement. Get with us for all your diesel needs
![](https://img4.findglocal.com/763/041/873657597630417.jpg)
https://fb.watch/mMIeo7HxZ6/
We will have our booth setup at NHRDA (National Hot Rod Diesel Association) for world finials. Stop by and say hi. We plan to have our Ultimate Callout Challenge truck competing as well. Been working on getting it ready to finally lay down some good passes. The America's Diesel Performance 6.70 truck will be competing as well.
![](https://img3.findglocal.com/229/056/860389412290569.jpg)
Currently looking for 1-2 techs. Prefer some experience. Must have your own tools. Come and join our team.
![](https://img3.findglocal.com/686/831/814611926868318.jpg)
Day two update. We hit the nitrous a little too hard and fast on the Dyno. Broke two injector hold down bolts and broke the b**g out of the head for another. We have everything here to put it back together for the sled pull, but at this point we’ve decided the best thing to do is call it on this event. We will get back to shop do some catching up then get the motor torn down and evaluate everything. With any luck in the next month or so we should be back up and running. Get some Dyno time on it at the shop and really get this dialed in and making serious power. We learned a lot this weekend, fixed some electrical issues and know where to go from here. Big thank you to all our supporters and sponsors. We will get this truck running right soon.
Rowdy Performance and Machine made a bunch of custom parts for the truck that worked flawlessly all weekend
Titan Turbo Service S488 spooled amazing and once we get all the power issues worked out it’s going to sing.
Kill Devil Diesel had us setup with the rotating assembly and heads that was working perfect for the application and can’t wait to see what they are capable of in the future. Along with Jared and his guys willing to do anything to help us keep competing.
Opti-Lube Additives & Lubricants got us set up with some racing oil and fuel that did its job amazing
Yukon Gear & Axle supplied us with the parts to build an amazing sled axel (unfortunately we aren’t doing that part anymore)
Warren Diesel Injection LLC supplying the fuel we need
Truck Source Diesel & Off-Road even though not a technical sponsor has been so much help for us not only at this event but throughout the whole build.
![](https://img3.findglocal.com/025/437/814084730254371.jpg)
Well day 1 of Ultimate Callout Challenge didn’t go as well as we wanted. Fought tuning/wiring issues all day. Truck was pulling pulse Width under load. We got it figured out but by that time we didn’t have enough time to make a pass. We did have a fitting blow out on our secondary high pressure pump on one run (but for those wondering it wasn’t anything to do with Rowdy Performance and Machine parts. This is the same pump that everyone runs. It’s just part of it. We have a solution for that already to prevent it from happening again. We are still going to shoot for big numbers on the Dyno tomorrow, hopefully it works out. Really wanted some good track times and turn it up to have. a better idea of what’s to do on the Dyno. Big thanks to Charlie and the KC Turbos team for all the help today between looking at tunes and helping with some parts. Truck Source Diesel & Off-Road helped us look at some logs as well. Kill Devil Diesel was a big help with parts and suggestions. Can’t say enough about everyone here helping out. We just might try and run Outlaw Diesel Super Series LLC tomorrow and redeem ourself on the track. We will see how to Dyno goes.
![](https://img4.findglocal.com/700/677/813227357006775.jpg)
Made to Ultimate Callout Challenge time to start getting setup and ready
![](https://img3.findglocal.com/039/534/812675020395342.jpg)
Well it’s 11PM and we are leaving for Ultimate Callout Challenge finally. A few hours later than we wanted too but we are on the way. Going to be doing some fabricating in the pits as well!
Kill Devil Diesel
Titan Turbo Service
Rowdy Performance and Machine
Opti-Lube Additives & Lubricants
WP Developments
Warren Diesel Injection LLC
Yukon Gear & Axle
Hwy 277 Automotive Machine Shop
![](https://img4.findglocal.com/114/306/805197841143060.jpg)
Working on the Compound setup for Ultimate Callout Challenge today. is real!!
Rowdy Performance and Machine
Kill Devil Diesel
Titan Turbo Service
Opti-Lube Additives & Lubricants
Warren Diesel Injection LLC
Hwy 277 Automotive Machine Shop
WP Developments
Yukon Gear & Axle
America's Diesel Performance
![UCCTix.com](https://img5.findglocal.com/117/305/804897861173058.jpg)
UCCTix.com Ultimate Callout Challenge 2023 Tickets
![](https://img4.findglocal.com/462/664/803695334626644.jpg)
How much Nitrous Express nitrous are we going to use at Ultimate Callout Challenge you ask?
Rowdy Performance and Machine
Kill Devil Diesel
Warren Diesel Injection LLC
Hwy 277 Automotive Machine Shop
WP Developments
Opti-Lube Additives & Lubricants
Titan Turbo Service
Yukon Gear & Axle
America's Diesel Performance
![](https://img4.findglocal.com/163/759/800252521637592.jpg)
We are setup with our Mustang Dynamometer at Redemption Repairs & Performance dyno day. Going to get some trucks on the rollers soon. Y’all come out always a fun time.
![Photos from Abilene Diesel Performance's post](https://img3.findglocal.com/900/362/793258899003621.jpg)
At Rowdy Performance and Machine finishing up a few things on the Ultimate Callout Challenge truck. She should be in the track this coming week. Can’t wait to get some shake down passes in it.
Titan Turbo Service
Kill Devil Diesel
Schaeffer's Oil
BD Diesel Performance
Opti-Lube Additives & Lubricants
Warren Diesel Injection LLC
Hwy 277 Automotive Machine Shop
WP Developments
Yukon Gear & Axle
America's Diesel Performance
![](https://img5.findglocal.com/683/093/781652466830931.jpg)
Our 25.6 cage built by Rowdy Performance and Machine passed inspection. Time for some tuning and testing out the new setup for Ultimate Callout Challenge
We are excited our first 25.6 cage passed certification. We want to thank Abilene Diesel Performance for trusting us with this job. Also want to thank Donny Andrade for all your help getting us on the list.
![](https://img3.findglocal.com/697/630/780198696976308.jpg)
Dyno loaded ✅
Dylan’s race truck loaded ✅
All the nitrous ✅
Headed to Ennis for Texas Truck Jam
![](https://img3.findglocal.com/710/136/778948157101362.jpg)
Got the RCD Performance, LLC rod in forEstradaKustomz 6.4 build to run 2020 6.7 steel pistons. Build should finally start coming together soon!
Our new display for Dyno events. Check it out at Texas Truck Jam this weekend
Mustang Dynamometer
Click here to claim your Sponsored Listing.
Our Story
Abilene Diesel Performance Provides Diesel Truck Repair, Automotive Repair & Aftermarket Performance Upgrades to the Big Country Area.
Videos (show all)
Category
Contact the business
Telephone
Address
3001 E US Highway, 80
Abilene, TX
79601
Opening Hours
Monday | 8am - 5pm |
Tuesday | 8am - 5pm |
Wednesday | 8am - 5pm |
Thursday | 8am - 5pm |
Friday | 8am - 5pm |
1110 US Highway 80 E
Abilene, 79601
Heavy Duty Truck/Trailer Parts, Service & Repair