END Iron
Here for metal fabrication!
Fun project wrapped up.
If anyone wants one let me know this one is sold and I can make them for 850$. It's 66 inches and has 3 inch spacing for sifting rocks.
Heck yeah!
A fun little porch pickup makes me super happy.
Customer wore out the ripper teeth of their box blade but back to business for them!
made light work of it.
A few more things to wrap up on the bucket and then I can work on finishing out the
Making some fun tools. Grapple and a ditch clearer/stump bucket. At least everyone I sell those to end up using them to cut trenches so they don't have to rent an excavator.
HTP America - USA Weld
Time to do some testing.
Everything seems to work really well. I had the ratios off and a few other little items left off. Really hoping to spend tomorrow chasing a few of these backlash items still.
Gotta few things to make so I can get to welding them up and start making an actual finally.
More build photos.
A lot of progress. Gantry next.
Really got a lot of fun stuff done in the tonight. Really big day ahead of me tomorrow and I'm super excited to get at it. I'll keep flooding stories.
getting the done over here in
getting the service setup at the property and really driving it in. Not done yet hopefully this week if not the beginning of next week I will be ready to flip the switch.
More pictures of the I have put myself in.
I am calling for the tie in approval and final testing.
I'm ready to make some
This whole journey has been very interesting the whole way.
I have had a great time learning about all the things I have messed up and fixed along the way electrically.
Glad I did this part but at the same time wish I would have probably just paid someone to knock it out.
You live you learn life goes on.
is getting much closer.
50x50x14 from is a wrap. Final building inspection is done from the county. I still have electricity to do but that's on another permit.
Good times working on the building.
Super excited to move on to metal and selling
Due to no fault of my own....and a VERY sore neck. Out with the old in with the new.
No eta currently. Ordered 10/28/22
Getting a LOT done on this building!
50x50x14 building progress is moving right along. Not done yet.
Putting the to work. It's been quite a while since I pulled this gem out of the garage. Slapped this boom pole together out of a bunch of scrap I had sitting around.
Works like it should. Not lifting anything
is being made on the building but just taking time.
Other updates - County told me I had to have engineered drawings on my electric permit so working on that now. If you can stamp drawings let me know. I'll pay you. Have a great
Pretty excited to get this building built and get my back in order.
This is a 50x50x14 from that I will be putting together with a bunch of friends and a lot of
build #3 y'all
This one will be a little different....like they all are. Cutting area will be 5x10 but overall will be right at 84"x144" and 34"-ish waterbed will be 4-6 inches depending on what's being cut.
The actual table won't be done till I get my which will be delivered next week from
The needs to sit for a little longer before the occurs.
Super excited to get this set up for my that will be 50x50x14. 6 pad for the building. It will have 2 garage doors with one being 14x12 and the other being 14x14. I am getting it from and plan to build it as much as I can.
is something I am currently discussing with two different due to me trying to find someone that actually wants to with me. If anyone has a 400amp service can hit me up or stuff like that.
Overall thanks for along.
Absolutely so much accomplished today.
Moving some stuff. More work to be done. So much more.
This is a undertaking I am getting ready to do everyone.
I have not posted much lately and my stories have pretty much died off sadly due to all of this.
truly do occur. I am moving my to a new property. Still in still doing but here are a few details.
50x60x12 shop
2 drive though doors
480
building
to say it's a ton of work ahead of me.
This is the that I had moved to the new property from the current.
Wish me Y'all
all of you that follow me. I truly do.
Got a lot of completed here recently. I think it's somewhere around 80ft worth. Still not done on the final but should be wrapped up here shortly.
Used the
for the majority of the job as well on .035 90/10 and it did a great job!
I also used the
for a small section.
Getting closer.
I am with this I cut all the parts on my 5x10 with my and then up with my and I still have some more things to do to it.
This one is a Schmidt grinder design not mine.
6000 in to this 2022 and have absolutely loved it.
Took 3 months to get which I am cool with. I owned a 2000 model with a and 6 speed manual and loved it too.
All about material and this one was due to it being painted. Pretty process honestly. 1/2 inch AR500.
Either way these shooting targets will be for sure beat up
#556
These and are done and complete.
Couldn't be to have them done and moving forward with it.
Getting some steel at pretty good at making sure my business has the steel I need.
Cut some steel this weekend! Had a blast with the on my 5ft wide by 20ft long if my table was smaller this would be an issue. Loading two 5x10 sheets at a time is an extreme time saver.
Need anything cut give me a shout!
I have so many orders to fill it's a
I need a bracket..what time does the store close....oh yeah it's closed. Hummm. I'll just make it.
#
Almost done with this little valve cover insert. Very cool ride has been waiting for a while for this one.
Starts as a then it moves to then it move to a fully cut 3/8 thick 35 piece order.
Fun little that is simple in yet will hold up to the elements.
Will completely collapse down to the ground and is less than an inch tall.
No biggie. Just a going to be at for the rest of its life. Really like this fire pit that .foxton designed specifically. Check him out! Weighs in over 320lbs. First "thin material" thing I welded up with the from
Second photo is me with the very first one I made and donated. My heart was about to explode at the auction in fear of it flopping. You never know the 😉
I have a cool little coming soon with some concepts that the customer is liking. The will be able to throw off some pretty good light I hope. This will be a memorial pit for someone who has passed away. These are always stressful.
Project was interesting. Started out as concept on a basically. This piece was made for a fellow. Don't exactly know what it is but happy that I met the customers
Don't have a system but want to make some holes with your hand torch? With this simple fixture you lay it on your steel and start cutting.
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Telephone
Website
Address
Chapin, SC
29036
Chapin, 29036
Mining in South Carolina has been one of the state's most valuable industries for over 200 years.
Chapin, 29036
Local, honest, general contractor for all your household needs. Assembly of swing sets, trampolines, furniture, moving assistance, etc.
Chapin, 29036
Family owned and operated Heating and Air company with over 25 years of experience.
Chapin, 29036
Proudly servicing the Midlands and all surrounding areas for all of your heating and cooling needs! We offer a 5% discount on all services for military and first responders year-ro...
223 Joe Free Road
Chapin, 29036
We're a family owned heating and air conditioning company specializing in service and installations.
180 Murray Lindler Road
Chapin, 29036
We provide turnkey concrete construction services for commercial, industrial, and residential clients
Chapin, 29036
We are a family owned and operated business here to help you with your land maintenance needs.
Chapin
Hubbard Industries is a sub contractor as well as a certified welder with over 20 years experience t
Chapin, 29036
Dragoon Security offers Information Security consulting and Managed Security Services to government,
Chapin
DonWin Development is a one stop shop for all your residential construction needs. We pride ourselves on providing quality craftsmanship at affordable rates.