Ewrecks Garage

Quick Lip restoration I did on these 1998 Meshies. Before and after pics. Here’s what they look like after a full Clear coat stripping, Sanding and fresh Polish on the lips! Not bad for a weekend project! Saved a set of 90s wheels! Now I have a set of Meshies for back ups! Trust me you can never have to many wheels!🤙🏻

When you know all the angles to the game, there should be no reason why you ain’t at the top.

1993 40th Anniversary C4 corvette that I’ve been working on for the past few days! Gosh this thing was a challenge! Where do I begin my write up! My buddy Tony had this idea in his head to Stance this Gem! I said let’s do it! Gosh little did we know how much custom stuff we had to do to make this work! These cars are not designed to be this low with this amount of camber. Don’t be fooled by these photos. This thing might not look like the traditional “Stance” car but trust me in person you would think other wise. Biggest problem we ran into was getting the car off the floor. The QA1 Coilover conversion is insane! If it were possible with how low that coilover sits in the front, this car would be sitting underground. All I had to work with was preload. I was working with factory control arms so I was able to achieve Max camber with is around 5-6 degrees in the front. And the rear factory camber bolts gave me 6-7 degrees. This car could be so much lower if the chassis would allow it to be. and yes, there is a lot more camber that could be achieved with custom arms. We are working with factory components. nonetheless, there will be more modifications in the near future. This is just the beginning look. Hope you like the different look we have done. It’s definitely an art!

📸 Ryan Rossner
📸 Adam Delgadillo Photography

Good morning! 🔥

Side Shot Saturday

Ewrecks Garage

📷 Adam Delgadillo Photography

Have you ever seen a 90s C4 Corvette stanced? You will here soon! Stay tuned for this Camberrrrr Vette!

Big aggressive wheels aren’t made for these cars. But with a little bit of street magic I can make them work. Rolled fenders, added camber to front and rears, aligned and slammed! This RSX is STATIC on the floor! On with the next 💯

Quick update on the Z. Body work is just about finished. The rust on the back hatch is being fixed up then the car will be ready to be prepped for base coat and then clear coat! Shout out to the homie Chris Garza for taking on the paint and body work! Can’t wait to see the finished product. Stay tuned 🤙🏻

I’ve always loved wheels. Here are some before and after pics of a rebuild I did on my Work VsXx wheels back in 2016. Tore the wheels down to have the faces powder coated high Gloss white. The factory outer lip sizes were 1.5in fronts and 2in rears. I Reassembled the wheels with brand new polished 3in reverse outer lips from VRwheels. The ending specs came out to be 17x9+22 Fronts and 17x9.5+28 Rears. Built for my EP3 Civic Si. Happy Wheel Wednesday!! 🔧👍🏻

My buddy picked up a new project! So today’s Friday fun began with dropping the subframe and trans on this 2009 Civic Si! He wants to freshen up the trans and replace the clutch! Along with a good cleaning cause this civic Definitely went off Roading a few times! 🤣 haha keep posted once done it might be for sale once we slap it back together! He’s gonna freshen up the car a bit! 😀🤙🏻

Out with the old suspension on this EK civic to updated coilovers. Cars ride so much more smooth on fresh suspension! Do your maintenance your car will love you! 🤙🏻

Last photos before we go in to paint and body! I’ve stripped down majority of the Z. Moldings, Weather stripping, Bumpers, (Front bumper held by 2 bolts) Headlights, Hatch interior panels, Door cards, Rear spoiler, sideskirts. Out of all the 30+ year old moldings I removed i only broke 1 clip. I can live with that! Haha off! Z will be gone for a bit but I’ll be posting updates of the progress as I get pics🤙🏻

Photo Dump! RIP to this Form! The Z is no longer this look anymore I’ve pulled the wheels. I’m in the middle of a change up! Will be posting the new stages it’s going through here soon! 🤘🏻

🤤🤤

Thank you all too my newest and OG followers! I see the numbers rising I appreciate yall for the support!! Let’s try too get 1k Likes/Followers 🙏🏻🤘🏻

Today’s Project Acura Integra! My buddy Paul and I pulled his Cylinder head off of his GSR. Cam cap bolt broke off in the head! He’s going to send the head off to the machine shop for a some maintenance! When it’s finished we will be putting fresh head gasket and timing belt kit so this car can finally hit the streets for the first time in 5 years!

Throw back Thursday! 2020!
📸Adam Delgadillo

Had a day to do a quick photo shoot of the Z!

🔥🔥🔥🔥

Still have a few Ewrecks Garage T shirts left if you haven’t had a chance to get ahold of one! $25ea haven’t decided if Im gonna make another batch of this design yet this might get discontinued Cash me out! 🤙🏻🤘🏻

Last post for 2023! Thank you all for the love you showed all year long! Let’s see what’s in store for 2024! I hope you have all have a safe and great New year tonight! See y’all next year! 🤙🏻🎉💯

Sonic Meet Tonight Hosted by Marcos. 8:30pm
6557 S Staples! See you there 🫡

My buddy Ryan Rossner being featured on KONIG WHEELS USA nice work! 🔥

We got some Z1 Motorsports, Inc. intake tubes as a birthday gift from Lauren Alexander! Very grateful for the upgrade! These factory 33 year old tubes were dry, rotted, and falling apart on me. Possibly had a boost leak. will find out on the first drive later! These red tubes give the engine bay some character love it! Thank you!

Ewrecks Garage T shirts are in and ready to be sold. If you would like a shirt let me know before they sell out! Shirts are $25ea 🙏🏻🤙🏻

It’s always nice getting these 2 Z parked up together! 🔥

S.A.R Clicks 📸

It’s been long over due for the Evo to get these Brembo calipers painted. The car will be sitting on jack stands for the week. Scuffing them up and prepping for paint 👍🏻

Good Morning Everyone! ☀️

Feels too good out tonight to not take a ride in the Subie 🔥

RIP Homie 🤙🏻