RPM Vapes

We need to get the government out of healthcare.

150ML bottles of juice

$25.00

Free 5ML injector

80W Joyetech Cuboid Mini Full Kit - 2400mAh

Product Introduction
Joyetech Cuboid Mini kit combines Cuboid Mini MOD and the special oblong atomizer. With Max output 80W, Cuboid mini has a 2400mAh Built-in battery. Variable va**ng modes, Upgradable firmware, Notchcoil, 5ml liquid capacity all make Cuboid mini a great setup for you.

Parameters
Size: 35.5 x 22.5 x 124.5mm
Battery Capacity: 2400mAh
Atomizer Capacity: 5.0ml
Modes Available: VW/VT-Ni/VT-Ti/VT-SS316/Bypass/TCR Mode
Output Wattage: 1 - 80W
Resistance Range:
0.05 - 1.5ohm for VT Mode
0.1 - 3.5ohm for VW/Bypass Mode
Temperature Range: 100 - 315℃/ 200 - 600℉

$70.00

75W Vaporesso TARGET VTC Kit with Ceramic cCELL Coil Tank

75W Vaporesso TARGET VTC Kit, a new product of Vaporesso. Target Box Mod comes with 75W VT/VW modes. And the no spitting tank installed a cCELL coil, which has a longer lifecycle. cCELL coil, true ceramic coil without wicks. The heating coil and ceramic are made together to form a coil unit.

Parameters
Tank Size: 22 (D) x 62mm (L)
Tank volume: 3.5ml
Coil: 0.2ohm cCELL Ni200 coil; 0.9ohm Kanthal coil
Mod Dimension: 92x 48x 27 mm
Temp Range: 150 - 315 °C / 300F - 600F
OutPut Wattage: 5W - 75W
Suitable Atomizer: 0.15ohm or above
Battery cell type: 1x 18650 battery (not included)
Casting: Zinc Alloy and Stainless steel
Thread: 510 Thread
Display: OLED

$79.00

Kangertech TOPTANK Mini SSOCC Pyrex Glass Cartomizer

Product Introduction
Kangertech TOPTANK Mini SSOCC Pyrex Glass Cartomizer, the same tank as that of TOPBOX Mini Kit. It comes with stainless steel organic cotton coil, which is much healthy and environmental.

Parameters
Capacity: 4ml
Size: 22 (D) x 45 (L) mm
Material: Pyrex Glass And SS

It comes with
1 x TOPTANK Mini
1 x SSOCC 0.5ohm
1 x SSOCC 0.15ohm
1 x Mini RBA Plus Base
1 x RBA accessory pack
1 x Manual

$40.00

200W Kangertech KBOX TC MOD W/O Battery

Product Introduction
200W Kangertech KBOX TC MOD W/O Battery, is an innovative TC MOD, with ultra low output ripple and PCB with unique serial number of global anti-counterfeiting quality. Its temperature mode can support Nickel, Titanium, Stainless steel and Nichrome wire.

Parameters
Size: 56x22x84mm
Wattage: 7W - 200W with 0.1W increment
TC Range: 100°C - 315°C / 200°F - 600°F
Coil Resistance: Ni200/Ti/SS at 0.05ohm or above; Nichrome wire, 0.1ohm or above
Battery: 2x 18650 batteries, 3.7V (must discharge over 30A)
Casing: Zinc Alloy/Aluminum Alloy
USB: Micro USB, DC 5V at 1.5A
Thread: Spring loaded 510
Display: LCD

$65.00

75W Eleaf iStick Pico TC Full Kit W/O Battery

Product introduction
75W Eleaf iStick Pico TC supports VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode. It features replaceable single 18650 Cell and compact size. With 2ml capacity, top filling and hidden adjustable airflow, Eleaf Melo 3 Mini is the best match for iStick Pico.

Parameters
Eleaf iStick Pico MOD
Size: 45mm x 23mm x 70.5mm
Wattage (maximum): 75W
Battery: High rate 18650 cell (Continuous discharge current should be above 25A)
Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR
Resistance range: 0.05 - 1.5ohm (TC modes); 0.1 - 3.5ohm (VW/Bypass mode)

Eleaf Melo 3 Mini
Capacity: 2ml
Size: 22mm x 55mm
Thread: 510

$60.00