Art of Assembly

It’s always 12 o’clock on the rack.

This is either a snippet out of Gran Turismo or the most trusted Skyline shop in DFW with a feature of the R33. A special thank you to our clients for trusting us with their priceless JDM legends for both maintenance and performance work.

Little tune touch up before the race weekend for this 488 Challenge Evo. Did you know we are partnered with to give you the best combination of technical and tuning expertise to make your car perform the best that it can? Get in touch with us for all your european automotive needs!

Posted • Santa hasn’t let us down, had been asking all year for him to bring us the world’s first direct fit, direct mounting, Motec M1 RB GTR Plug and Play system and he hasn’t fallen short..
This M130 PnP system does nearly double the duties of an M130 system alone as it has built in CAN based expansion. Full ATTESA system control, sequential gearbox, DBW, Flex Fuel, Coolant Fan, Fuel Pump PWM, and up to 12 injectors.. The compatibility list is as close to endless as Santa could make it.. Including support for the factory steering angle encoders..
for sales enquiries and if you live in northern hemisphere, is the North American distributor for these beauties
Have an M150 and want to take advantage of GTR specific firmware, it’s available for a wire in M150 solution

#

Maserati 4.7 engine dressed up for the dance at an engine dyno. .innovation headers and custom Art of Assembly harness with a xtreme. Let’s see what this setup will do.

We have been churning some plug and play fueling kits and wiring. This goes with our Motec PNP for pre LP and LP Gallardo/Gen 1 Audi R8 kits from . If you need help going that extra step for more power without the headache of doing it all by yourself we got you.

A stock 2023 Toyota Corolla GR on the dyno for some pulls.
271 hp / 274 tq. Pretty respectable for a turbo 3 cylinder. Wonder how much more these engines can do.

Factory Dinan Supercharged BMW E36 M3. Upgraded electronics package with drive by wire controlled by LINK ECU.

Looks like a handful of you caught a whiff of what is up. 1JZ in 2WD converted Subaru with a LINK ecu and ECUMaster PMU. did some great fabrication and we are just getting it dialed in with the electronics.

Can you spot what’s not normal here? 🤔

Posted • .1000usa 🎟️ Tickets are now live! You can purchase through the link in our bio.

RACE 1000 will be hosting its 2nd event in the United States at the Chase Industrial Complex in Beeville Texas. With a plethora of successful events in Germany, Sweden and the UK, RACE 1000 will be bringing a roll racing (November 18th), and a standing half mile (November 19th) event to Texas. With over 1.5 miles of runway, RACE 1000 is sure to be an adrenaline filled weekend with the highest horsepower vehicles from across the United States competing.

A special 4g64 engine block build for a Mitsubishi Evo 9. Refurbished parts with our dry ice blasting and v***r honing services makes this as close to oem brand new as it gets. Check out more examples of clean

***rblasting

Don’t see many Porsche Turbos in this color. Basic upgrades and maintenance for daily driver fun. The Porsche center lock wheel option doesn’t hurt either. 😆

#991 #997

Looking for a shop to take care of your vehicle? Come on over, the grass is definitely greener on our side.

This factory built Ferrari 488 Challenge Evo race car was a treat to have for some exhaust and engine calibration work.

Yes, we do service and modify high-end exotics!

Alpha in for flex fuel update and gear swap. Good work and team on these wild creations. Excited to dive into it!

Now that spring showed back up which one are you choosing to drive before the cold hits again?

Looks like a handful of BMWs have been needing maintenance lately. We have full VANOS rebuilds for the S54 engine ready to go and can take care of any other misc items you may want to go with it.

Attention S54 owners. When it’s VANOS time it’s also time for your upper chain guide. We see this all too often. Broken at its weakest point.

Full bolt-ons for this Nissan GT-R with some cosmetic upgrades. Those upper intercooler pipes and red Q BOVs gives the engine bay some pop. Let’s see how it does on the dyno with 🌽🌽🌽

EVENT ANNOUNCEMENT!
Race 1000 — October 22nd and 23rd, Beeville, TX. Come for the 1/2 mile and roll racing or just to spectate. All are welcome. Visit www.race-1000.com to register! See you there!

Hellrot or Imolarot? We are not picky, they are both our favorite.

Art of Assembly Home | Art of Assembly Art of Assembly Tuning, custom builds, cars, DCT, Motec, Dallas, DFW, Dynojet, Dry Ice, V***r hone, Mclaren, Porsche, Audi, GTR

2019 Mercedes E450 in this lush Cardinal red. This beauty came in for some exhaust work and a tune. We gave that V6 twin turbo the power up it needed.

2017 Mercedes C43 AMG in for some better exhaust notes and a tune. Performance and fun drivability through the whole power band. Anyone else a fan of the front grill?

2018 Audi B9 S4 owner by . Great looking car making good power. Even with outdoor temps 100+ F our wind tunnel is doing its job. Hope to see more of you Audi lovers.

A 1998 Supra that was still living in the 90s. It was time for some modern technology but retaining that Supra-esque feel. Retro mod at its finest. First is tossing that ancient automatic Supra transmission. Our ready to go DCT transmission packages with some quality pieces is the new standard for 2JZ applications. Better drivability and durability with our flexible electrical integrations and custom gearbox calibrations. New levels of fun for this Supra.

An uncommon trio but what they do share is the Art of Assembly treatment.

Art of Assembly is looking for a passionate and highly motivated individual to take on the responsibilities ranging from light maintenance work to full on customization projects. All work requires attention to detail and tidiness. Art of Assembly clientele varies, and it is important that the ideal candidate is easily adaptable, coachable and has a willingness to learn. The primary responsibility of this role is to perform repairs and modifications, troubleshoot issues and provide options for repairs to ensure long term reliability and functionality. Ideal candidates must be a team player and work well with others.

Art of Assembly is growing and looking for a passionate technician to join our team. We aim to provide the best automotive experience not only for our customers but our team members as well. If you are fan of details, take pride in your work, and ready to continuously learn the craft reach out to us. Find out more at www.artofassembly.com or shoot us a resume to [email protected]