Krawltex

Mike's Ram 3500 "Ranch Truck"! When doing ranch duties, the truck required added protection up front and beefier tires. We installed a front bumper and A/T4W tires. Perfection! 👏

Nick's super clean 2015 Ram 2500!
We installed a suspension system, which provided a perfect stance and worked flawlessly with the factory rear air suspension. The extra clearance made room for the 321 wheels and the Defender Platinum tires. To keep things under control, we installed a steering system. shocks and steering stabilizer was the icing on the cake!!!

Flex Friday! Adam brought us his JK to install a Atlas transfer case and transfer case e-brake kit. We still have to tidy up a few things and install an e-brake cable, but we just had to do the Krawl Test. 😉

Travis decided it was time to upgrade to 40"
For added strength, we installed a set of ball joints, front truss, and a steering box sector shaft brace. The result is 👌👌👌

We're grateful for our amazing customers! The shop has been slammed, which has allowed us to add a few members to our team. 🙌🏼 (more info to come soon)
Here are a few cool projects from the past few weeks. Thank you!

Our Suzuki Samurai needed to see some dirt. What a great weekend with our friends at our annual *tboxoverland run with a pit stop at the
Thank you to our partners!

6" lift kit on Chance's F150. Our friends at did an amazing job on the powdercoated parts! 🙌

and his Stretched CJ went from the to internet famous after rolling is beautiful Jeep in Moab. We've known Mark for a long time, and he's one of the most determined and hard-working guys we've met. He dusted himself off and kept wheeling the Jeep for the remainder of his trip with a lot of thumbs up! Once back home, he decided it was time to swap out the tired 318 V8 for a fresh 360 V8. knocked it out of the park. Thanks to Robert at Just Jeeps in Austin, TX for the helpful info on the swap. 🙌🏼
Time to go wheeling!

Louie brought us his son's Audi Q5 to improve the stance. We went with 1" lift springs from and ATs. Perfection! 🤌

A few cool projects from the past few weeks. Steering upgrades, suspension systems, maintenance, and more! We are grateful! 🙌🏼

We survived the
Now, back to work! 😎

New shoes for
and 🤌

Throwback Thursday! Tony and the Krawltex race car featured in the BRT 2011 Year in Review DVD!

Ben's Ram 2500 got a suspension system with shocks, and a set of the new spectrum series flush mount lights from 😎

William's K10 Daily Driver!
4" suspension system
33" Evolution MTs

Our friends over at brought us their clean Ford Expedition for a leveling kit and ATs. 👌

It was super cool to see this FJ again! Some of you OGs might remember this one. It was originally built by JK Customs!
Our friends over at sent Mike and his FJ over to get him ready for the round up. Mike wanted a receiver installed that would carry his receiver mounted tire swing and tow his off-road trailer. removed the old receiver and fabbed up a new, heavily reinforced receiver. 💪
We also ran new trailer wiring, and rerouted some brake lines with extra clearance.
Come check this rig out at this weekend!

#

Kevin brought us his 2024 Sequoia TRD Pro straight from the showroom floor. The TRD Pro package is already perfect, but he just needed a little extra height. We contacted our friends at and we went with their USA Made 🇺🇸 preload collar lift kit. From there, we were able to easily clear 295/70R18 A/T4Ws with zero rubbing or trimming. Look out for Kevin and this bad ride on a trail or golf course ⛳️ near you. 😉

Travis' JT Gladiator Rubicon got a set of 5.13 gears from and diff covers. 💪🏽💪🏽💪🏽

Enrique brought us his beast F350 to eliminate the truck's "death wobble". The problem was solved with heavy duty steering from and trackbar from
It was time for new rubber for the 26" , so we went with 37" tires from

fenders and inner fenders were a perfect combo on David's JL!

Doug's Ram was upgraded with a suspension system with shocks, and a 55 gallon fuel tank from

Rob's 4Runner was a fun one! We started by building a .offroad front bumper. Noah and Jose teamed up and did an amazing job! We added a winch and finished it off with a textured powdercoat. From there, we installed a set of rock sliders from and a full skid plate system from

David had been chasing this 91 Blazer since high school. When his daughter said she wanted a Blazer for her first car, he was even more determined. He finally convinced his friend to part with it with the promise that he would slowly bring it back to it's old glory. After 9 years of sitting with a seized engine, our first task was to bring it back to life. pulled the old engine, and replaced it with a brand new long block. ALL of the other serviceable items were also replaced. It started on the first crank!
Next, David wanted some chunky 35x13.50R15 . We might have found the last set on planet Earth. It was worth it! 🔥
Stay tuned for the next round of upgrades coming soon!

#350

Chico and Randy both reached out to us on the same day to install leveling kits on their trucks for their birthdays. Turns out they were high school buddies, and they shared the same birthday! 🎂 🥳
Both trucks received leveling kits from and Chico's upgraded his wheels and tires on his F150 with a sweet combo from and

Patrick's Superduty got a new set of shoes. Another set of Klever RTs!

brought us his Tundra TRD Pro to outfit the truck with a leveling kit from
We were super impressed with the quality and fitment of this USA Made kit! 🙌🏼 🇺🇸
This was plenty of room for the and 👌🏼

brought us his retro Samurai for some rad upgrades! We started by installing the conversion and steering kit. We needed a little extra driveshaft clearance, so we added their high clearance transmission crossmember. The steering was complimented with an steering stabilizer. There was some slight rust on the rocker panels that was eliminated and replaced with a set of beefy rock sliders. 💪🏽
Coming soon will be tires, beadlocks, and bumpers!

brought us his massive Jeep JL for some rear shock adjustments. We extended the rear lower shock mounts with a beefy set of mounts from our friends at to get more shaft at ride height, and to prevent the shocks from bottoming out. From there, we added some preload and adjusted pressures. 💪🏽

Neal brought us this unique 1920s Bugatti replica EV project. We were tasked with mounting the battery box and electric motor/torque box assembly. It's back home with Neal for some wiring, then we'll bring it back to quietly tear up the streets of Hutto, TX. 🤫