Pcs, LLC

Now finally we reattach the shell and do a test run and just like new all over again.😁👨🏾‍💻💯

After get the new feeder in place then we proceeded to make the correct connections for it to get it back up and running again.👨🏾‍🔧👍🏽

At this location the clients feeder for scanning and faxing was not working properly so we had to remove the entire feeder and replace it with a new one......take a look to see how we removed this on a brother printer.👨🏾‍🔧

Another location where we upgraded there router and switches to the for a more powerful network output.👨🏾‍💻

Tired of your MDF closet looking like this want your network faster. We help get your network faster and we even make your MDF and IDF closets neater.👨🏾‍💻👍🏽

After installing the two new routers and switches we had to make sure the connections were properly connected correctly and even added fiber optics to their network.👨🏾‍💻

Removal of old equipment two routers and two switches getting it ready for the new equipment to be installed 👨🏾‍💻

The next steps are to get the image on the machine and rename it for the user. 👨🏾‍💻

And after the imaging process is completed you have a new laptop ready to be sent out or given to a new user. 👨🏾‍💻

Today on the project site we are reimagining laptops for users coming back to the office and new hires. 👍🏽👨🏾‍💻

Over view of the work switch is working now and we did it high in the air. 👊🏽💪🏽👍🏽

After building up the new switch found out that all I was going to have to do is replace the power supply 🤦🏾‍♂️

We did another one but this time it was for the tech support team of Baptist medical.

We did another system board change today and branding impressing even more clients how fast we work.

We impressed a new client today with a record of fixing a keyboard in three minutes.

The second laptop needed a new we**am was in and out in no time.💁🏾‍♂️

loves my services I had to go back to fix two more laptops for them and I have another to do tomorrow. This one got fried, cleaned it up put in the new board and branded it. Easy Peasy💁🏾‍♂️👨🏾‍💻

These images are the finished product I really want to go get more paint because the paint I got sucked but it will do 😁

Working on my xbox changing it up a bit and decided to share it with my followers 💁🏾‍♂️😁

This is the finally part, in this part you would configure the TPM make sure you do 2.0 so the client can update to the new win11 if they want to then continue with the MPM lock and you're complete.....😁👨🏾‍💻🕺🏾

This is part 2 in this part I'm showing you how to program the board to the correct settings so you can lock the board properly.

This is the branding setup before you start the process. 👨🏾‍💻💁🏾‍♂️

This is part 3 of removing and installing a new system board for the hp prodesk mini 600 G5.

This is part 2 of the hp prodesk mini 600 G5 breakdown.

By request these post are going to be back to back of how to remove a system board and brand it for a hp mini prodesk 600 G5 step by step💁🏾‍♂️👨🏾‍💻

We did a job at another hospital and just to show off our skill set we changed out and branded not 1 nor 2 but 3 system boards at the same time. And was done in a hour and a half.

After we changed out the screen (taking the whole pc apart) have to put it back together and now everything it work properly.

LCD screen replacement for a hp Elite all in one.