CCNA

PaloAlto Networks Firewall Lab in progress will check for all configurations and setup guide👏👏
Follow & subscribe: Router Nest🚀🚀

Please like and comment to appreciate this lab… thanks for all the subscribers who support our page !

OSPF and BGP network Topology via Unknown👏👏
Follow & subscribe: Router Nest🚀🚀

Please like and comment to appreciate this lab… thanks for all the subscribers who support our page !

Cisco Nexus vPC via Ah Mer 👏👏
Follow & subscribe : Router Nest 💜💜
This design illustrates a Cisco Nexus-based topology leveraging Virtual Port Channel (vPC) technology in a highly resilient, dual-layer setup. The architecture, centered on four Nexus 9000 switches (N9K-1 to N9K-4), is designed to provide redundancy, load balancing, and simplified management across the data center.

In this topology, N9K-1 and N9K-2 are configured as a vPC peer pair, while N9K-3 and N9K-4 form another vPC peer pair. The two peer links (Po1) connecting each pair of switches are crucial for the proper operation of the vPC, enabling them to synchronize state information, such as MAC addresses, ARP entries, and control plane information. This peer link ensures that both switches in each pair behave like a single logical device when connecting to downstream devices, providing seamless failover if one switch fails.

The design features a vPC peer link between each switch pair, ensuring that there is no single point of failure. Specifically, each peer pair (e.g., N9K-1 and N9K-2) aggregates its connections using vPC, so that downstream devices, connected through interfaces Eth1/1 and Eth1/2, see a unified connection. The key vPC interconnect (Po10) facilitates this logical grouping across the four switches, allowing for multi-pathing and load distribution while preventing loops using loop-free designs inherent in vPC.

Looking deeper, this topology embodies the concept of multi-tier data center design, often referred to as a spine-leaf architecture. However, it is more focused on a layer closer to end devices (leaf switches), emphasizing high availability and consistent bandwidth across interconnected systems. By using vPC, the architecture eliminates the complexities of spanning tree protocols (STP), allowing all links to remain active and forwarding, maximizing throughput while minimizing convergence times during failures.

From a practical standpoint, this setup is ideal for data centers looking to ensure continuous operations with zero downtime during switch or link maintenance. It provides flexibility in terms of device connectivity and scaling, as adding new devices can be achieved without disrupting existing traffic flows. The vPC deployment also enhances overall operational efficiency, providing a unified view for network management and troubleshooting.

This topology exemplifies the power and versatility of Cisco Nexus and vPC technology, making it suitable for businesses with demanding high-availability and high-performance requirements. Whether managing east-west traffic within a data center or ensuring robust connectivity across critical applications, this design achieves the goals of both scalability and resilience.

Another BGP network Topology via Polycarp 👏👏

Follow & subscribe: Router Nest 💜💜

Please like & comment on the post if you like to appreciate his work… we will check if we got the full configurations as well for this topology

Understanding OSPF LSDB Exchange: Key Concepts 🕹️🕹️

Follow & subscribe : Router Nest 🖤🖤

When a data link first becomes active, OSPF routers initiate communication by exchanging Hello messages to establish neighbor relationships. Following this, they share topology information through the remaining four OSPF message types.
The accompanying diagram illustrates this process between two routers, showcasing the message flow and the corresponding neighbor state on each router.
❗Each OSPF router maintains a state machine for each neighbor, which can be viewed using the "show ip ospf neighbor" command.
These neighbor states evolve as the routers exchange messages, eventually reaching a "Full" state, indicating full adjacency and completion of the process.

Cisco Networking Simplified PDF for Engineers : 400+ Pages​​👍👍
Follow & Subscribe : Router Nest🖤🖤

Please like and share the post to support our work !



Subscribe our page and help us to get more content for you guys, Thanks for all your support !

What are the types of SFP Via Harmeet 👍👍
Follow & Subscribe : Router Nest 💕💕

Small Form-Factor Pluggable (SFP) modules can vary based on their intended use. Common types include:

1. SX (Short-Range):
Supports short distances, typically using multimode fiber.

2. LX (Long-Range):
Designed for longer distances, often used with single-mode fiber.

3. BX (Bi-directional):
Sends and receives signals on a single fiber strand, using different wavelengths for upstream and downstream.

4. ZX (Extended Range):
Offers extended reach compared to standard modules, suitable for long-distance connections.

5. CWDM/DWDM (Wavelength Division Multiplexing):
Allows multiple wavelengths to be transmitted over a single fiber, increasing capacity.

6. SR (Short-Range) and LR (Long-Range) Bidi SFPs:
Bi-directional modules for short and long distances, respectively.

Choosing the right SFP depends on factors like distance requirements, fiber type, and network specifications. In Fiber-to-the-Home (FTTH) installations, Small Form-Factor Pluggable (SFP) modules can vary based on their intended use. Common types include:

1. SX (Short-Range):
Supports short distances, typically using multimode fiber.

2. LX (Long-Range):
Designed for longer distances, often used with single-mode fiber.

3. BX (Bi-directional):
Sends and receives signals on a single fiber strand, using different wavelengths for upstream and downstream.

4. ZX (Extended Range):
Offers extended reach compared to standard modules, suitable for long-distance connections.

5. CWDM/DWDM (Wavelength Division Multiplexing):
Allows multiple wavelengths to be transmitted over a single fiber, increasing capacity.

6. SR (Short-Range) and LR (Long-Range) Bidi SFPs:
Bi-directional modules for short and long distances, respectively.

Choosing the right SFP depends on factors like distance requirements, fiber type, and network specifications.

CCNA: IP Routing A Blog about Technology, Analysis and Research of Networking.

CCNP ENCOR BGP LAB for Network Engineers Via Metodo👍👍
Follow & Subscribe : Router Nest💙💙

Please like and share the post to support his work, Thanks for supporting our page !

Zscaler Deployment & Troubleshooting : 35+ Pages available​​​📚
To all Network Admins /Network Engineers

Follow & Subscribe : Router Nest 💕💕



Thanks all for supporting us ... Please subscribe for more content !

Talk about FortiGate Infrastructure NSE4 : 430+ Pages PDF​📚📚

To all Security Engineers/Network Engineers

Follow & Subscribe : Router Nest💟💟



Thanks all for supporting us ... Please subscribe for more content !

CCNP Study Guide SYBEX PDF available : 650+ Pages PDF​📚📚

Please add your email id below and we will share the pdf tomorrow.. Happy Learning and thanks for supporting us !

Follow & Subscribe : Router Nest 💟💟

CCNA/CCNP Question of the day

Follow & Subscribe : Router Nest 💟💟

Please like the post and Answer if possible

CCNP Troubleshooting Study Guide for Network Engineer : 200+ Pages ​ ​ ​📚📚
If you are not subscribed yet, please subscribe our page to get premium content, thanks all supporting to Router Nest❤️❤️

[" "," "," "]

Software Recommendations Explained in CX Cloud Explore software recommendations in CX Cloud in this demo.

[" "," "," "]

Aerolíneas Argentinas - Customer Story- Services (CX) Taking to the Sky: How Cisco Success Tracks Helps Aerolíneas Argentinas Orchestrate Network Health

Cisco ACI 2.0: Multi-Pod Fabric A Blog about Technology, Analysis and Research of Networking.