Cobra Foam Inserts
You may also like
Cobra Foam Inserts offers a wide selection of replacement foam inserts for your protective cases and dry boxes.
π π π π π 5 star review from Richard: Better than original
The Cobra foam insert is sturdier than the original Plano foam. Great improvement!
https://www.cobrafoaminserts.com/products/plano-case-11842-replacement-foam-insert-set-1-piece
π π π π π 5 star review from Brandon: Apache 9800 - Way better foam
This foam is ten times better than what comes in the case. Highly recommend!
https://www.cobrafoaminserts.com/products/apache-hard-case-9800-replacement-foam-insert-2-pieces
π π π π π 5 star review from Darrell: A great value
This is a value and I can carry 5 pistols to the range easily. It hold the weapon in place and eliminates the chances of damage from shifting weapons.
https://www.cobrafoaminserts.com/products/apache-3800-range-case-foam-insert-for-5-handguns-and-magazines-foam-only
π π π π π 5 star review from d: Well made
Well made quality work. Not to be said as a negative, i would like slightly softer foam. Then i would have been able to slip a revolver in a slot during transport. Overall great job.
https://www.cobrafoaminserts.com/products/pelican-case-1450-range-case-foam-insert-for-4-handguns-and-magazines-foam-only
π π π π π 5 star review from Joe: Best product I ever invested in.
I own several 1911 in almost every caliber and barrel length. I could not believe the fit like it was made for my fi****ms. I also own a couple of revolvers and the fit was fine. I would recommend to other firearm collectors.
https://www.cobrafoaminserts.com/products/apache-3800-range-case-foam-insert-for-5-handguns-and-magazines-foam-only
π π π π π 5 star review from Wes: Best decision I could have made!
I tried to make one myself and that was a mistake! Just buy it and get it over with. This works so well for my numerous hand guns and accessories.
https://www.cobrafoaminserts.com/products/apache-3800-range-case-foam-insert-for-5-handguns-and-magazines-foam-only
π π π π π 5 star review from William: Quality befitting the Benelli M4
Years ago I attempted to do a perfect cut out in the foam for a camera case . I figured that since I am a surgeon and I was using a sharp scalpel it would be no big deal. Well , it was a big deal and the result was a big disappointment , cosmetically , but it did function . Nothing equals a Pelican case for protection , but I knew that I would not be satisfied with the system if the foam did not look as professional as the M4 and the Pelican case. Then , I discovered Cobra . I thought that this is too good to be true. Well, I can testify that the final result is what they say it is . The foam is "sculptured" beautifully for my M4 , making a perfectionist like me very happy.
https://www.cobrafoaminserts.com/products/pelican-1720-case-for-benelli-m4-shotgun
π π π π π 5 star review from Glen: Still have not received my order
16 days and still nothing. Tracking says that there is a problem with my package. E-mail to Cobrafoaminserts has gone unanswered. Looks like I got scammed this time. I guess these are the chances we take ordering online...........
https://www.cobrafoaminserts.com/products/pelican-case-1510-range-case-foam-insert-for-6-handguns-and-magazines-foam-only
π π π π π 5 star review from John: Useful
I haven't used it yet but the two pistols I'm taking seem to fit. I just hope my rear sights on my two pistols don't cut thru the foam from the great pressure there is when lid is closed.
https://www.cobrafoaminserts.com/products/pelican-case-1450-range-case-foam-insert-for-4-handguns-and-magazines-foam-only
π π 2 star review from Nicholas: Not Precise
I ordered 3 of these and only 1 came nearly perfect. The other 2 werenβt cut correctly where the round part that holds your watch doesnβt fit snug with the insert.
https://www.cobrafoaminserts.com/products/pelican-case-1400-replacement-foam-insert-for-10-watches-foam-only
π π π π π 5 star review from Daniel: Great case for M4
Solid....strong....protected....easy to customize.
https://www.cobrafoaminserts.com/products/pelican-1720-case-for-benelli-m4-shotgun
π π π π π 5 star review from Sean: Great product
Iβm so glad I finally bought this. I have been looking at it for awhile now and Iβm not disappointed. Will be buying more.
https://www.cobrafoaminserts.com/products/apache-3800-range-case-foam-insert-for-5-handguns-and-magazines-foam-only
π π π π π 5 star review from David: Don't Bother with the Pick'n'Pull Foam
All I can see is it's a nice idea and makes for a pretty display, but other than that, I haven't had much luck with the pick'n'pull blocks. The item(s) I transport always end up sliding under the top layer and are only held in check by the inner sides of the case itself ... even after using spray adhesive. This replacement convoluted Cobra Foam fits the Apache 9800 very well and helps to hold even my heaviest and most bulky item(s) securely, the same as any other hard case I've ever had. I don't know how this foam will deteriorate over time; if it should last as long as the cases it is replacing, I can look forward to about 40 years of service. Long enough to where it really won't matter much to me. Don't fool with the pick'n'pull blocks or else plan on ordering a Cobra Foam replacement.
https://www.cobrafoaminserts.com/products/apache-hard-case-9800-replacement-convoluted-foam-insert-2-pieces
π π π π π 5 star review from Vincent: Best foam insert ever
It's foam and it fits
https://www.cobrafoaminserts.com/products/pelican-case-vault-v770-replacement-foam-inserts-set-1-piece
π π π π π 5 star review from Michael: Nice size, easily milled
Loved the foam - it was perfect for my application. It milled perfectly and is ready to protect these items from damage as they are shipped between locations where I need it.
https://www.cobrafoaminserts.com/products/pelican-case-1450-replacement-foam-insert-2-pieces
π π π π π 5 star review from Rob: Great stuff! Used it to convert my 1520 to pistol case.
Nice quality foam which cuts easy. Purchased these to convert my Pelican 1520 case into a pistol case. I didn't like the 4"+ thick "pick-n-pull" foam, so now I have the ability to use a couple different combinations of foam with a couple different cut-outs for different pistols. Have bought from Cobra a few times now, and their foam is good stuff!
https://www.cobrafoaminserts.com/products/pelican-storm-case-im-2400-replacement-foam-inserts-set-5-pieces
π π π π π 5 star review from Scott: 1750 case
Guys,
The foam fit my case perfectly, itβs a very nice and high quality pieceβ¦β¦except I really messed it up ( in my opinion) when I cut it, so you boys are going to cut me another one so I donβt get laughed off the range.
Talk to you soon,
Scott
https://www.cobrafoaminserts.com/products/pelican-case-1750-polyethylene-foam-inserts
π π π π π 5 star review from Matthew: Better than I expected
Much MUCH higher quality than the pluck-n-pull that came with the case. Cuts good, and I'm happy with it overall.
Just a note, certain sealants can cause it to shrink once it dries. Aerosol Plasti-Dip specifically. Gorilla Seal and Flex Seal work very well with it, though
https://www.cobrafoaminserts.com/products/apache-hard-case-9800-replacement-foam-insert-2-pieces
π π π π π 5 star review from William: Great Customer Service
Had an issue with my initial order contacted customer service via email for help. Was asked some questions so they could understand the problem and was immediately resolved and a new order shipped. Perfect! The insert worked exactly as described and I like the finial product. Will recommend this company to my friends.
https://www.cobrafoaminserts.com/products/apache-3800-range-case-foam-insert-for-5-handguns-and-magazines-foam-only
π π π π π 5 star review from Charles: Apache 9800 hard case foam insert
well I just want to say that this foam insert for the apache 9800 hard case is Way better than the original
foam that was in the case. very easy to cut and after cutting to fit my FX impact m3 I then sprayed the foam with
plastic dip and man is it nice Like others have said on here I give it 10 stars
https://www.cobrafoaminserts.com/products/apache-hard-case-9800-replacement-foam-insert-2-pieces
π π π π π 5 star review from JOHN: Perfect fit
Impressed with the quality of work. Very professional.
https://www.cobrafoaminserts.com/products/plano-case-11842-replacement-foam-insert-set-1-piece
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Contact the business
Telephone
Website
Address
13010 San Fernando Road Unit #1
Los Angeles, CA
91342
Opening Hours
Monday | 9am - 5pm |
Tuesday | 9am - 6pm |
Wednesday | 9am - 6pm |
Thursday | 9am - 6pm |
Friday | 9am - 6pm |
21606 Devonshire Street, Suite #: 5483
Los Angeles, 91311
Harrison is a world renowned golf shaft manufacturer. Its shafts have been used to score 62 Tour vic
5667-5631 Telegraph Road
Los Angeles, 90023
Are you literally tired from camping on chilly, rocky, or rough terrain? Sleep like a baby with hikermat, the #1 outdoor mattress.
Los Angeles, 92001
From wood-burning to propane-powered portable fire pits, we've got you covered with comprehensive rev
14121 S. Figueroa Street
Los Angeles, 90061
RYEULACN started in the United States in 2004. Our goal has always been to paint a colorful stroke for urban youth in their original wonderful lives. Spare time & weekends, we gath...
9601 Owensmouth Avenue, Unit #1
Los Angeles, 91311
Enhance your adventure experience through cutting-edge modular systems and custom mobile interiors for adventure vans.
Los Angeles
Your 12 Volt Specialists | Over 12 years of experience designing and manufacturing KickAss Products to Power Your Adventure
ηΎε½οΌζ΄ζηΆοΌε ε©η¦ε°ΌδΊε·
Los Angeles
Suppliers on Pinkpdog are managed through a professional rating system to select top suppliers and optimize the procurement of quality goods, while at the same time, maintain the c...
Los Angeles
Authorized Garmin dealer and supplier of dog hunting supplies as well and other Garmin Products
5350 Wilshire Boulevard #361399
Los Angeles, 90036
Wet Kayak brings you to the water, for fun, family, and adventure!