Flatland Imports

Who wants another merch run? 🥸

The culprit & the fix 😆 94 Mazda Miata in for a non running issue, we put some fresh gas and a new charged up battery in and got it to fire, but it would die within a few seconds of starting. After checking fuel pressure the pump came out and here’s what we found: the fuel pump feed hose was torn, the fuel pump had no retainer keeping it in place, and was flopping all over. So we put a new pump, hose, and put a new retainer on it. It also got a new fuel filter and hoses and it was ready to go home! Thanks .delacruz_ for bringing it in!

-

Lowering springs starting out at low as $400 and installed in one day

2020 STI in for a brake service, someone at some point had done what’s called a “pad slap” which if you are in a pinch is okay. We took the time to measure the rotors and look at the wear patterns and saw that it needs new pads and rotors. So do yourself a favor and do it right the first time. Only doing pads creates uneven wear patterns on the rotor and will make the car shutter, shake, or pull to one side of the road under hard braking. If you want someone to take the time and effort to do a good job, and make it right come and see us!

Excuse the mess in the back, been a long couple weeks moving. Yall check this one out, Precision turbo on a S2000! Car came in with some fuel & exhaust leaks. We built a turbo bracket, fixed the fuel leaks, and repositioned the V-Bands.

RARE EVENT, GTI in the shop

Rip.

Big thanks to for sponsoring us. Welcome to the team! He printed our liveries, always gives us advice on vinyl and occasionally saves our butt when we’re doing something last minute haha.

What’s up peeps meet the newest member of the team! She will be helping us out with all of our customers needs and helping at events! Yall make sure to give her a warm welcome! .loves.you

Dropping a new shirt this weekend End O Summer event this Saturday in Midland! You can thank Matt for this design. He loves pizza. Pick one up at the booth or DM your order.

STI pads and rotors, we do that! let us get you ready for some track days!

POV: it’s your birthday and you realize you need to order a shiny titanium exhaust. Ordered ✅

It’s about time this car gets what it deserves. OEM goodness for this 03 civic SI. Previous owner had done some real shady work with a ebay clutch that ended up exploding on him. We’re going to get him back on the road and ripping in no time!

Track day maintenance? There’s nothing more important before a big race day to insure your car is ready for some laps. This car got all new rear suspension as well as some beefier axles. Topped it off with a good alignment and marked to insure it all stays where it’s supposed to be! Also went back with OEM Coil packs and got rid of the OTL coil packs that were having some issues at higher RPM. These have a better spark output and dwell time for better combustion at those rpm’s.

We’re your dealership alternative! Crosstrek in for an oil change and 60k mile checkup per Subaru service manual. Coming back for a brake service and a couple small things.

Evo II came in with a peculiar misfire issue at idle after warm up. After checking the obvious we moved onto checking timing and we found the culprit. The last set of hands had made a few errors. The motor survived, we corrected the timing, and she left purring with the ecstatic owner!

TCX VF48 going on she’s going to sound great, look good and outperform the OEM unit.

Swipe to the modify fuel pump assembly

Radiator goodness! Keeping our 21 STI track car nice and cool for this upcoming season! 🤓

Thank you for for the hatch, it’s so beautiful! 😭

Coming together. Doors are wrapped. Now prepping the rest of the body for wrap. Then we’ll finish wrapping my hatchback blue!

2016 WRX getting some much needed reliability mod😎 IAG AOS purchased and installed same day!

Reviving a WRX that’s been sitting in storage for 8 years, got it all back together and got it up and running again. This car got all new fluids, everything got flushed, and replaced. Car got new plugs, timing belt kit, vaccum hoses, pcv hoses, and water pump.

Very blessed this weekend having a shop full of subies, all getting different work done to them! Very excited for y’all to see what’s next for us! P.S. if you haven’t checked out our youtube channel yet go leave a like and subscribe!

getting this one wrapped up today!

What’s up guys! Here’s some eye candy for this car we’re working on right now. 2jz gs 300 Getting a head gasket replaced with some extra goodies!