Ozark Laser & Shoring

Cody Montgomery at it again from our Field Service Team!! Worked on a CAT D6N Dozer today.

The machine was saying IMU not oriented correctly. He got to the job site and discovered that the body sensor cable had come undone. Cody fixed the cable and checked all the sensors. He then verified that the machine was still in calibration and the problem was solved!

Just another day at the office for our awesome field techs!

Some of our awesome team members are out at Pitt State with Scott Bayless teaching SmartGrade!!!

Here are a couple pictures we have showing some of the training!

Our Senior Salesperson out of Springfield, Doug Whitlock is shown here, though we aren't sure who the guy on the left is...😉

Great Job, Guys!

Another success story coming from one of our finest field technicians, Cody Montgomery!

Customer's slope would be off in auto until he rebooted the auto. Cody found a broke connector on the cable to the sensor and someone or something hit the junction box bending the slope cable at the connector. He replaced the cable and updated the controller firmware. He then tested and adjusted valve speed and the dozer was operating perfectly.

Our Field Technician Mastermind, Cody Montgomery at it again with excellent service!

Customer was having issues with his machine blade, come to find out, after checking the cabling, moisture had started the corrosion of pins and causing a power wire to short out.

Ran new cabling and figured out a way to keep the issue from happening again!

Way to go, Cody!

Cody Montgomery, one of our Field Service Technicians at it again with another successful diagnosis and repair!

Grades were off in the machine. Checked machine builder and found out the wrong machine builder was selected. He made a new machine builder and calibrated. Machine working as it should now!

Great Job, Cody!

Rodney Hunt building surface files on the job site with Tom Boyce Excavation!

Rodney's the master!

This customer's grades weren't matching. Two of our Field Technicians, Cory Parker and Cody Montgomery found smashed cables that led to a smoked sensor on the dogbone. They replaced the necessary equipment and recalibrated.

Nice job, fellas!

Two of our awesome Professional Services Group team members, Tyson, and Rodney conducted some Base and Rover and SmartGrade Dozer training for Fastrac in Topeka, Kansas this week!

Great Job, Guys! Keep it up!

Cody Montgomery out of our Tulsa, Oklahoma branch worked on a JD 450J this week.

Would not stay initialized and the lines on the job file weren't steady. He updated the system, checked and cleaned the connections and rebuilt the machine file.

A true champion in our Field Service Team!!

Connor Kennedy and Ken Fish went out out Malden, Missouri last week and installed and calibrated a mmGPS add-on kit for a John Deere™ Smart Grade Motor Grader for Capital Construction!

Great Job, Guys!

Ken Fish and Cody Montgomery making it happen in Oklahoma this week!

They finished installing a 2D and 3D MM System on a Cat E Paver!

Right On, Guys!

One of Our Professional Services Group Team Members, Rodney Hunt getting some Motor Grader Training done out in Oklahoma City this week for Triple T!

Nice Work, Rodney!

One of our Professional Services Group champions, Connor Kennedy, was in Kansas over the weekend to get a couple of Intelligent Compaction rollers ready for the customer to use.

The rollers needed the software updated to the correct version, machine calibration, and uploaded all project settings from Sitelink.

Connor was able to work around the customers schedule to get the rollers up and going when they were not using the machines, while still getting them ready in time to start an upcoming project!

Nice Job, Connor! What are weekends, anyway?

4th Week In a ROW!!

Cody Montgomery out of our Tulsa location bringing the content!

Cody installed new cutting edges on 140M grader, recalibrated, adjusted antenna height and verified with rover.

Bouncing between 2 and 3 hundredths of grade.

The Best Support, Every Single Time!

Cody Montgomery at it AGAIN!

Worked on a D6K2 in Bartlesville. Old 9168 system was having trouble uploading files.

Now we're looking at a possible upgrade on a system.

Way to go, Cody! Always doing your best for our customers!

One of our Field Service Technicians, Cody Montgomery has been putting in work this last week!

Screen went out on this twin squared grader, had to send that in for repair and rent the customer a GX-60. Cody calibrated and verified with the rover.

He found out that the JD rotation sensor was bad.

Cody always coming in with the solutions!

Great Job, Cody!

Earlier this week, one of our Field Service Technicians, Cody Montgomery was working on a CAT D5G dozer with a GX-55 that was having radio issues.

Going the distance for our customers every day of the week!

Great Job, Cody!

Rodney, one of our Professional Service Group team members is out with Clay Cole today while they are working on house pads in Joplin, MO.

Rodney helped get them set up with a GPS system to make this job as easy as possible!

Thanks Rodney!!

Chris Minton out of our Rogers, Arkansas branch showing off another huge part of our business!

18x18x10 pit box for a new lift station in Bentonville, AR

Nice Job, Chris!

Two of our Professional Services Group team members, Connor and Rodney set up a jobsite for Capital Paving yesterday to get it ready for an upcoming pave at the Camdenton Airport!

This is an ongoing project, next we'll see Ken and Connor installing and calibrating the equipment on the machine and setting up the mmGPS equipment!

Way to go, Guys!

A few of our Professional Service Group team members, Rodney, Tyson, and Dustin did an awesome job setting up a demo for Murphy Tractor in Wichita, Kansas this week!

They set up and demoed an 872 GP SmartGrade Grader with Pilot Controls. We're all really enjoying the new software updates from Topcon and Deere.

Great Job, Guys!!!

Ozark Laser & Shoring updated their website address.

Three of our team members in our Professional Services Group, Eddie, Dustin, and Todd set up this station at Brett Barnhart Excavating. Barnhart Excavating will be hosting this station for us.

This station will improve and increase Topcon's TopNet nationwide network for the state of Oklahoma.

These stations can be used for many things like surveying, machine control eventually vehicle assisted driving.

Great Job, Guys!!!

Ken Fish, our Field Service Manager spent some time talking with Heavy Equipment Operations students at North Central Kansas Technical College last week about 3D-MC Machine Control.

Any chance we get to teach others about the benefits of the technology in our industry is time well spent!

Thanks Ken!

Our Field Service Manager and one of our Field Technicians did a custom install on a Quick Attach 6-Way dozer blade for Bennett Inc a couple weeks ago.

Awesome work, guys!!!

Check out our website for more info! https://ozarklaser.com/