SaberFoundry
Custom and Production lightsabers
Updates and upgrades
Trust of Windu
In progress, currently at prototype and finish test phase.
Oga’s for breakfast, we’ll it’s after morning on some planet!
The Peacemaker lightsaber from StarWars: The Old Republic.
Limited to 20, made to order for $850.
Little teaser for the SW:TOR Peacemaker lightsaber.
Made to order for $850
Are you connected with the Light side or consumed by the Dark?
Two AEO shipped out today.
Get yours this week to get 20% off.
Smugglers Outpost has a video up with their installation of a Brassiwan. Go check it out and drop them a like and comment to help grow this channel.
Ep. 3 Saber Commission - Saberfoundry Brassiwan CFX Neopixel (4k) SMUGGLERS OUTPOSTFacebookhttps://www.facebook.com/SmugglersOut...Etsy Shophttps://www.etsy.com/shop/SmugglersOu...Instagramhttps://www.instagram.com/smuggler...
My personal AEO with the V2 Flagship chassis by and soon to be finalized adapter.
As of now brass is not currently available for the AEO, due to the higher pricing point, but could be with enough interested inquiry.
AEOs are in stock
Chassis is in limbo, currently going towards a Shtok V2 Flagship variant working out the front end to make available.
Working on this SWTOR Unstable Peacemaker
Look for this early 2022.
AEO chassis parts lists.
Multiboard chassis:
24mm speaker
TS01 killswitch 4
5x5 tactile switch, 3.0mm with 1.7mm plunger
Keystone 18650 battery holder
Crystal Chamber, above plus:
2x 1.75” 4/40 socket head screws
4x brass tubes; 2x 60mm long (4x0.20mm), 2x 30mm long (4x0.45mm)
Chamber parts will be listed ASAP through Shapeways when finalized.
McMaster-Carr McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
AEO multiboard chassis
Proffie tray ✅
AEO multi board chassis getting its boards/trays
So far:
CFx and Proffie
Verso and GH next.
Might make a whole separate chassis for Warsabers NeoCore board if there is interest, comment below the board you’d likely put in it for yourself or others.
Proffie fitment on the Crystal Chassis complete.
The AEO
This is a presale listing, production is funded and currently in progress. All funds will be held until hilts ship. Estimated ship date of August 1st.
A elegant lightsaber hilt. Inspired by the halls and windows of the first Death Star.
This all aluminum empty lightsaber hilt features: threaded main body construction, vented pommel, and proprietary switch plunger.
Takes a standard 1” blade. Optionally utilizes a recess in the emitter to hold a 7/8” NPXL connector.
Basic chassis files for many boards will be provided with purchase.
Preprinted and Crystal Chamber chassis components are available through my Shapeways page when finalized later this week.
Imperial Credits gift card.
$100 value at SaberFoundry.net using unique engraved discount code.
$125 each, 6 total planned for this set.
Almost time to announce the next hilt, almost set for the main production.
In the mean time, the chassis fitment process is going good. Got the removable battery holder fitted so the base chassis is nearly finalized, crystal chamber chassis is nearing completion.
Proffie slot -in progress
Battery holder -fit
Kill switch -fit
Tactile switch -fit but pending functional test
24mm speaker enclosure -fit
Crystal chamber -in progress (should be able to hold either the frosted plastic crystal or a 12mm krayt pearl using an optional part)
If you have any other boards that you’d like me to get the chassis ready for please leave a comment below and I’ll be sure to do my best to make the chassis accommodate accordingly.
Chassis fitment progress on the soon to be announced hilt.
The replacement Brassiwan emitters are in. Drop me a message to confirm your shipping information.
Thank you for your understanding while I handled this issue.
Tolerances matter in life and quality work. Be tolerant but also demand a certain quality for yourself. And with that in mind, I again wish to express my appreciation in the patience and support. On this and any future projects I always welcome criticism and/or critical input. They all go into making the next hilts better, or even solve issues!
So to those who messaged me directly pointing out the issue and those who even provided measurements of the emitters received; Thank you!
An issue has been brought to my attention: The problem is that the emitter is out of spec on the Brassiwan. This will create issues with blade connections and retention.
The solution is that a new part must be made. It is already on order at my expense and will be shipped to any who ordered a brassiwan for no cost.
Timeline is rough still but I’m hoping to have these parts in your hands by the end of June. Thank you for your input and understanding while I work to fix this issue.
Ouuuhhhh lala Halloween colors already!
ProffieBoard v2.2 - Open Source Sound Board All-in-one STM32L4-based lightsaber electronics. It is small, feature-packed and 100% open source. This board retains all the features from the Teensy based designs, but are smaller and requires less work to put together. These are more advanced boards to use and it is recommended to read the detail...
All preorders have been fully refunded. I don’t want to hold anyone’s money while the High Spike project is in jeopardy.
The deal made will be fulfilled, I will provide the physical goods to the party involved, although I will no longer be releasing the product in that form.
A complete redesign with tricks learned and aesthetic as well as functional upgrades is now in the works.
This also means the chassis I designed is no longer viable except for the one sample I get to retain (so here it is my personal High Spike proffie2.2 chassis with crystal chamber for a 1/2” pearl.
There may be some legal issues around the High Spike. And as such I have suspended all ordering.
Preorder buyers have been contacted. As stated full and immediate refunds are available, and/or until hilts ship, if the issue gets sorted out.
These concerns worry me to the point that I would rather eat the cost of this project and move forward with other designs, build board holder out. Allowing for as many quality of installation choices all the way to final aesthetics and secure construction.
If you have any questions concerns or just comments please leave them below or message me directly through my Instagram
The Vaults are opening slots, best of luck to all in the drawings.
That project tier looks like my dream for my Satele Shan set from Helvetica.
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Website
Address
437 Califronia Avenue
Palo Alto, 94306
Get in touch with us today to find out more about our tasting bar or join our wine club.
Palo Alto, 93004
We make beautiful double fleece blankets to enjoy any time of the year! Message us to start designing
Palo Alto
Welcome to DRT Soap! We specialize in providing high-quality bar soap and other hygiene products to t
Palo Alto
Custom fitted picnic table covers for every occasion. Partial proceeds are donated to local animal shelters.
Palo Alto, 94301
Located inside the first Apple Store in the Bay Area, where Steve Jobs & Co. frequented, our giant se
550 Stanford Shopping Ctr
Palo Alto, 94304
I’m a Nordstrom Stylist that specializes in virtual appointments.
Ventura
Palo Alto, 93003
EZ Jewelry & Home Interiors, Home Furnishings, Oriental Rugs, Gifts, Lamp, Jewelry, “Innovation, C
1975 E Main Street
Palo Alto, 93001
5000 sq foot showroom with unique styled vignettes that change daily. Everyone wins when they shop a
Palo Alto
Here for my Rodeo Community Team Ropers, Cowboys and Cowgirls. Check out my Website. I make Boot Spurs!