Performance Fabrication

Long overdue update on Camaro. The car is temporarily back from the body shop to get the plumbed wired and driving before we blow it all apart for the final time and then off to paint

31 Ford with a flathead in for a mild steel exhaust system with cutouts. Sweet ride

Porsche exhaust job. Customer wanted to remove the existing setup, keep the cats and use a GT3 muffler

Cool project for from a few months ago. We were asked to build a cage/exoskeleton that modeled the dimensions of the vehicles body

Recently finished this street/strip El Camino. Vintage air ac, global west suspension, wilwood brakes and a big ol BBC controlled by a MSD Grid

BMW 2002 in for a modified seat harness bar and shoulder belts

63 Nova in for a 4 link install

Bringing this El Camino back to life thanks to and a 540ci big block chevy

Since it’s the Daytona 500 this weekend let’s look back at the championships with the Hilleman AMC Javelin!

Tempest ladder bar car in for a 7.50 update

#4130

Really happy with how these LS7 headers came out on this Nova. Great plug and column clearance, starter comes right out without loosening the header and both go in and out without pulling motor mounts.

An original built BMW 2002 came in with some serious bump steer issues after many years of racing. We machined new steering mounts and arms to correct the geometry

#4130

A road race build we recently completed getting its first laps on the track!

LS Race Truck Onboard - Sonoma Raceway 1:42.9 First ever shakedown of a new race truck build by Performance Fabrication. Extremely fast and well balanced out of the gate, laying down consistent 1:43's on...

Just about ready to hit the track

Z06 corvette in for a service. New clutch, fuel pump and fluids

One of our road race chassis back from paint and getting assembled

63 Nova in for a front coil over and disc brake conversion. Installed a header and exhaust system as well

Our LT5 swapped chevelle went home last week. What a fun, drivable package!

Car features a cooling system and heat exchanger, dry sump tank, , dash, and PCS paddle shifter

Progress on the air intake and water tank for the supercharger.

Here are some plumbing updates on the Camaro. Oil cooler mounting and ducting to the inner fender well. Vintage air hardlines and bulkheads

Stopping power courtesy of

Cleaning up some gaps on the 70 Camaro bumper

Chevelle project update thanks to the great people at and

Modifying the tunnel and firewall for this massive transmission and high pressure fuel pump on the LT5

Another exciting project underway! This 72 chevelle will be getting a 750hp LT5 and 8L90 transmission

After 30+ years the building was due for a facelift!

Apologies for the lack of updates, we’ll be posting more moving forward 👍

Closing out the week with these Camaro front wheel wells. Mounting the trans and oil coolers next to start working on the ducting

Lancia Integrale in for a downpipe rework to gain ground clearance and not interfere with the front suspension travel

Closing the week out with a big block and TKX install on this 68 Camaro. Love these cars!

66 Chevelle we recently finished with a big block chevy. Really clean and nice driving car