Robert Lyons Custom Knives

After the Fourth of July sale. All knives are ready for sale with 300+ layer Damascus blades (1075 and 4340), and HRC 58. The handle and handguard are cast into one piece making the knife extremely sturdy. The Damascus blade is welded inside the guard and epoxied in place for a neater fit and finish. Six of the blades were etched for 30 minutes and the remaining four were etched for 14 hours giving a much deeper pattern. Top row, left to right the handle material is gold epoxy on the first two knives, and buffalo horn on the last three ( #2, #4, and #5 were etched for 14 hours). On the bottom row, left to right the handle material is black epoxy with orange pieces and the last three are burl rosewood ( #5 was etched for 14 hours). Priced with sheaths, $325.00, firm.

#307-5 – Tiger Snake V – Custom made boot knife with 3/16” thick blade in 420 stainless steel. It registers 58 on the Rockwell scale (HRC). Its overall length is 9”, the blade length is 5”, and the handle length is 4”. The handle material includes rosewood and camel bone scales. Both knives include a thick handcrafted cowhide quality leather sheath, which is double-stitched, welted, triple-stacked leather. Don’t forget I have a lifetime guarantee on the knife as well as free lifetime sharpening.

Tiger Snake V was used by actor Matt Dillon in the movie “Bad Country” which was released in April 2014. It is my all-time best seller! $200.00. Call 985-768-9535 or email [email protected].

#180-4 - Robert Lyons Skinner IV - Ready for hunting season, little skinner with 300+ layers of raindrop Damascus (1075 high carbon and 4340 low alloy tool steel) and camel bone handle, includes leather sheath. 13 in stock $125.00 each

#180-5 - Robert Lyons Skinner IV - Ready for hunting season, little skinner with 300+ layers of raindrop Damascus (1075 high carbon and 4340 low alloy tool steel) and camel bone handle, includes leather sheath. 1 in stock $125.00 each

#180-5 - Robert Lyons Skinner V - Ready for hunting season, little skinner with 300+ layers of raindrop Damascus (1075 high carbon and 4340 low alloy tool steel) and deer antler handle, includes leather sheath. 3 in stock $200.00 each

I now have some of my knives for sale at Clayton House on 1600 Collins Boulevard in Covington. Please stop by and check them out.

For sale
Award-winning artist Monte M. Moore, well-known for his fantasy art and sculpture, has tamed this wild 35"-long beast to serve your guests in a creative union of style and function! His most unique approach to decorative dragon art yet, this 52 lb. Toscano exclusive is sculpted 360-degrees and topped with a 3/8"-thick, pencil-edged oval glass top so he can be admired from all angles. This finely hand-painted, quality designer resin dragon is ready to serve and protect!
39"wide x 22" deep x 18" high. It weighs 52 lbs. Two each at $299.00 each.

Robert Lyons Custom Knives updated their address.

Father's Day Special!

#175-1 & -2 – Nelson Bowie I & II – They are both a custom built fixed bladed Bowie knives with a mirror-polished finish, 3/16” thick, 12” & 10" blades in 420J2 stainless steel with beautiful file work on spine of both blades. The handle material on both knives are European red deer stag crown antler. Both knives include a thick, handcrafted cowhide quality leather sheath, which is double-stitched and welted. Price is $350.00 & $325.00, respectively. Only one of each is currently available. Call 985-768-9535 or email [email protected].

Robert Lyons Custom Knives Handmade custom knives built and designed by Robert Lyons

Father's Day Special!

#307-5 – Tiger Snake V – It is a custom made boot knife with 3/16” thick blade in 300+ layer Damascus (4340 low alloy and 1075 high carbon steel). Its overall length is 9”, the blade length is 5”, and the handle length is 4”. The handle material is walnut with a lanyard hole and comes with a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted. Price $175.00. Only three available. Call 985-768-9535 or email [email protected].

Father's Day Special!

#159 – Johnnie Boyett – It is a custom made fixed blade double-edged partially serrated fighting knife with 3/16” thick blade in 300+ layer Damascus (4340 low alloy and 1075 high carbon steel). Its overall length is 13.0”, the blade length is 8.0”, and the handle length is 5.0”, solid brass hand guard, handle is buffalo horn with lanyard hole and comes with a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted.
Price $250.00. Only two available. Call 985-768-9535 or email [email protected].

Father's Day Special!

#159 – Johnnie Boyett – It is a custom made fixed blade double-edged partially serrated fighting knife with 3/16” thick blade in 300+ layer Damascus (4340 low alloy and 1075 high carbon steel). Its overall length is 13.0”, the blade length is 8.0”, and the handle length is 5.0”, solid brass hand guard, handle is Indian rosewood with lanyard hole and comes with a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted.
Price $250.00. Only two available. Call 985-768-9535 or email [email protected].

Father's Day Special!

#841-1 – Serbian Cleaver I – This is a custom made Serbian cleaver with a 3/16” thick blade in 300+ layer Damascus (4340 low alloy and 1075 high carbon steel). Its overall length is 12”, the blade length is 7”, and the handle length is 5”. The handle material includes oak scales which was collected from Jack Daniel's barrel staves. It also comes with a certificate of authenticity and a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted. Price $300.00. Only one available. Call 985-768-9535 or email [email protected].

Father's Day Special!

#841-1 – Serbian Cleaver I – This is a custom made Serbian cleaver with a 3/16” thick blade in 300+ layer Damascus (4340 low alloy and 1075 high carbon steel). Its overall length is 12”, the blade length is 7”, and the handle length is 5”. The handle material includes oak scales which was collected from the gravesite of Stevie Ray Vaughan. It also comes with a certificate of authenticity and a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted. Price $300.00. Only one available. Call 985-768-9535 or email [email protected].

Father's Day Special!

Top, #814 – Big Fish (Large Filet Knife) – Is a custom made filet knife with 1/16” thick blade in 420J2 stainless steel. It has an overall length of 14.25”, blade length of 9.25”, and handle length of 5.5”. Only two available. Price $175.00
Bottom, #813 – Little Fish (Small Filet Knife) – Is a custom made filet knife with 1/16” thick blade in 420J2 stainless steel. It has an overall length of 12.25”, blade length of 7.25”, and handle length of 5.5”. Only two available. Price $150.00
The handle material on both knives are walnut scales with stainless pins. Both knives come with a thick handcrafted cowhide quality leather sheath, which is double-stitched and welted. Call 985-768-9535 or email [email protected].

I am just starting my Facebook business page and below is a small summary about my business.

I made my first knife 25 years ago. I have been established in business in the knife industry since 2002. I spent 12 years of my life working with machine shops all over the country and possess a good working knowledge of the machining industry. My company is dedicated to making and supplying the best products for my customer’s needs. I produce knives of my own design as well as historical pieces and custom designs, which I received from many of my customers. I am always working on new designs in an effort to bring the best and most interesting products to my customers.

In recent years, I have been involved in the local movie industry. In addition, you can look for three of my knives in the recently released movie “Bad Country,” starring Matt Dillon, Willem Dafoe and Tom Berenger. Each actor will be carrying one of my knives in this movie, which was released in April 2014. You will also see one of my boot knives being used by Matt Dillon in the “Bad Country” movie trailer.

Subsequently, since 2014, I have been actively and legally collecting broken tree branches and other pieces of wood from graveyards and various sites. After processing, I ultimately use this wood for handle material for my knives. Each of those knives comes with a certificate of authenticity as well. I now have about 80 different sites in my collection. Please get in touch with me if there is any interest.

If you have any interest of purchasing any of my knives please message me in my inbox.