Bowtie Truck Stop Inc
Bowtie Truck Stop, is your neighbor in the Mid-West with the parts you need for your 1947-2017 GM Truck restoration. Give us a call with your truck parts needs.
six12.242.9925 Kevin or six12.987.1071 Lisa
St Cloud Pantowners Swap is tomorrow, Sunday August 18th. Looks like a great day ahead of us. Come and look for all sorts of things you didn't even know you needed.
We are happy to announce the addition of Distinctive Industries line of interiors to our business. I really like their Buddy Bucket and their bench seats. Available in 54" for early years and and 58" wide seats for later year trucks. I just installed a red Buddy seat with diamond stitching in the 100% new 67-72 Truck Puzzle Kit. If you like it just give us a call!
Holding up at the Wabasso Roll-in tonight. Brought the ol' 71 Suburban and the 100% new truck puzzel kit.
We made a last-minute decision to attend Autofest in New Ulm yesterday. We loaded up our new truck and some parts to display. The weather was perfect. Thank you to everyone who stopped by.
Started to install the 100% new cab onto the 99.5% new running gear. The center tie rod isn't reproduced, and I am using Sqr Body engine stands. The rest of this truck will be new, new, new.
Years ago I picked up 6' and 10' fork extensions. The 10 footers came in handy for Troy and I to get it on the frame.
I hope I can get some time to work on this some more tomorrow.
These have become hard to find. I have wanted to find an ochre gold radio delete plate for my 71 burb for years. I'll have this on my first order after they arrive at Key Parts. If you need 1 or more give me a call or email and we will get you on the list.
Made the trip to the fairgrouds this morning for the Spring Extravaganza. Sun is up, sky is bright and blue. This looks like a great day to reinvent your hunter gatherer parts caveman.
I got a call tonight from someone looking for a passenger side Panel truck utility bucket and brackets. Anybody out there have one to spare?
On to next weekend! May 5th is our first swap of the season in Minnesota. It. Is called the Spring Extravaganza put on by the Gopher State Buick Club. 13 years ago at this show was our very fist swap as Bowtie Truck Stop. We have come a long way.
One other note of interest. Our Premium 77-91 squarebody door does fit into the back seat of a 4dr Honda Civic. The sale was dependent on it fitting!
Well in typical Jefferson fashion, the weather was less than stellar. On the good side, setup day was really nice.
All in all, we had a great weekend with every visitor to our booth. We wiil be back in the fall. Until then please give us a call with your parts questions.
We start packing the trailer this weekend for the Spring Jefferson Swap April 26-27. If you need us to bring something to the swap now is the time to call. Kevin and Lisa
The Spring Wahoo Nebraska is tomorrow! 7am April 14th at Saunders Co Fairgrounds. The weather should start in the 50's and end up around 80-ish. It should be a great day. Come on out and find something you didn't know you needed!
This is a long video walk around at the Lincoln Swap March 3rd. I found our spot at 1:40.00 into the video. This was taken fairly late in the morning because we had sold all of the cowl hoods at the end of our spot. https://www.youtube.com/watch?v=CItEShFSlRA
3 out of 4 hours set up done.
Nice drive to Lincoln today. Great weather, 60-70 and sunny. We even managed to get a good spot in line.
This is the glamorous side of swap meets. Get in line at 3pm, wait until 3am to get into the building to start our 4 hr set up. 7am the doors open to the public sunday Mar 3rd.
Come see what the hundreds of vendors have for sale.
Pics of the trailer being packed for the swap in Lincoln Sunday. It is full! Our shop cat, Ochre Jr, is not taking the trip with us
I can now say I am not buying any more trucks for the rest of the year. This one snuck in under the buzzer at 4pm 12-31-2023. It is a 1967 MN State Fairgrounds truck #20. 1 of 3 that sold at an auction 15-20 years ago. I didn't buy this back then because the utility bed was ugly, and it hasn't got any better. The second pic will be truck #18 that I did buy back then and what it looks like today after Jeremy Laures ended up with it.
$500 NOS Oldsmobile Cutlass Drivers side front fender in barn fresh excellent condition. GM part # 414579 Olds Cutlass, 442, or Cutlass Supreme. $500 plus any shipping. Local shipping will be $35-$75. Outside of the 7 state Mid-West will be LTL truck freight. Correct for 1974-75 but you could change the side marker light hole for the 1973 model. Let your Cutlass friends know just in case they don't know they need this yet.
Over the last couple of years we have been getting asked about the 3rd gen A-bodies, 73-77 Chevelle, Buick, Olds, and Pontiac body parts. I didn't expect these panels to become available this soon. Complete cabin floors, front floor pans, LH or RH floor halves, 1 piece complete trunk floors or 3 pc trunk floor patches, trunk braces, floor drops. All those rust spots hiding under your carpet or trunk liner can now be replaced. I would be happy to order the parts you need and save you shipping $$ by sharing the ride with my stock inventory orders.
If you want to end up with a better truck you have to start with better parts. These are A and B Pillar repair panels. These pictures will show you the new, high quality tooling part beside the old tooling and you can decide for yourself.
The new A-Pillars are $42 ea. The old A-pillars are $15 ea.
The new B-Pillars are $15 ea.
Bowtie Truck Stop is located in Springfield Minnesota. All parts are not the same! We look for and carry the best available. Please call or email us with any questions you may have on your classic car or truck project. We ship 5 days a week or you can pick up at our shop. Kevin and Lisa
Day 1 at Jefferson Wi is just about done. It was a busy day. The weather remained dry all day. Tomorrow's forecast is even better. We still have parts to sell and orders to take.
The trailer is fully packed. Squeezed in a last minute Chevelle roof skin. Ochre and Ochre Jr have figured out trailer packing means we will be gone. Check out the Madison Classics Fall Jefferson swap Fri-Sun Sept 22-24.
New high hump cab floors have arrived at my supplier. We will have a couple on our next stock order. I believe these are a copy of the 1984 to 87 4x4 floors. 1973-1983 had a bolt in humps. I also believe the humps changed again for the remaining R/V 88-91 crew/burb/blazer models. IF you know the differences feel free to comment.
We had time today to display a new item for Bowtie Truck Stop Inc at the show in Grand Rapids Sunday. We have the new rear seat frame for 69-72 K5 Blazer/Jimmy and 67-72 3rd row Suburban seats. The kit includes the bottom and back frames with springs, front tubular legs, tubular arm rests, x4 rear legs, and bolts to assemble.
Finding a seat for your K5 just became much easier. See us tomorrow at the swap or call us at the shop to get started on your car or truck project.
Click here to claim your Sponsored Listing.
Videos (show all)
Category
Telephone
Website
Address
123 N Cass Avenue
Springfield, MN
56087
118 West Rock Street
Springfield, 56087
MAT Industries Sanborn Manufacturing is a member of MAT Holdings, a $2 billion global supplier for the automotive aftermarket and consumer industry. Our Sanborn facility engineers ...
620 W Rock Street
Springfield, 56087
Authorized Prime Attachments Dealer - Universal skid loader attachments for all types of machines.
1035 W Central Street
Springfield, 56087
Teske MetalCraft is your metal fabrication partner, delivering durability and reliability to meet your needs. We provide quality service and craftsmanship at a competitive price.
502 N Van Buren Avenue
Springfield, 56087
Derek Krebs Construction LLC offers all your home improvement needs. New construction, remodeling, r
1115 West Central Street
Springfield, 56087
Retail chain offering extensive selection of quality merchandise including clothing, tools, sporting goods, pet supplies & more.