Los Angeles Concrete Polishing

Starting this church today! Metallic epoxy install.

Installed ARDEX PCT over stone slate in this pool house and polished to #400 grit.

Our team knocked out this warehouse to meet the schedule to open by Monday! Lots of challenges working around several trades especially doing coatings. We made schedule on time! Customers happy 😊

One the crews finished polishing this super hard warehouse floor. This was a small challenge cutting around all the racking system but no job is too difficult, we just get it done!

We just installed SafeFlex system in this parking lot entrance. SafeFlex is great for pool decks, patios and walkways. It’s anti-slip, lowers floor temperature and stain resistant.

Installed self leveler at 3/4” then finished white pigmented urethane matte.

Installed Euclid level top with custom color in this high end office building.

We finished polishing this classroom, we took it up to #400 finish it popped pretty good!
www.LosAngelesConcretePolishing.com

We finished up this commercial office space. When we started it had glue, rust and white patch. We cut the glue and patch with #40 grit and finished at #400 grit Husqvarna diamonds. Great clarity with this system.

This is a single step grind and patch job to prepare for new flooring in Los Angeles.

Grind and seal in palos verdes done! ✔️

The crew finished polishing the concrete in this 3 car garage today.

Finished this flake epoxy system today.

Finished polishing this garage today.

Grinding and polishing this garage in Los Angeles today.

Installed first coat of Deccofloor USA microtop one with cement color today. We will follow with another coat, sand and seal.

Another one arrived today!

Doing some equipment cleaning today.

Finished removing epoxy paint now time to vacuum and prepare for sealer.

We were hired to remove this epoxy paint off 5,000 sq ft and return the floor to its original condition after a contractor mistakenly installed it.

Finished top coat on this urethane cement in a commercial kitchen in Pasadena.

Starting this commercial building single grind to remove topping.

Thankful to have this little guy in our arsenal, the Husqvarna T5. There was no way into this new construction site for bigger machines. Cuts and polishes like his big brother T6.

Lead never follow!

Getting the first cut in with 40 grit on this commercial project. We’re going to polish to an 800 grit finish.

We got our big diamond delivery order yesterday from Husqvarna and one of the new battery powered S26 vacuums and one S26 corded. Spent the day delivering the vacuums to a couple of our job sites. Then back to the shop to unpack a few hundred diamonds! It was like Christmas morning!

Got a recent delivery from Husqvarna.

One of our crews polished this a few days ago and the customer sent us this photo saying how happy she was and with the attention to detail…It’s what we strive to do.

The guys just finished this garage polish in Redondo beach.