Optimuz Manufacturing

We are looking for CNC Operators
Shift: 1st shift ( 7 am - 4 pm) and 2nd shift (4 pm- 2 am)
Our manufacturing company is looking for an experienced CNC operator who can run a variety of CNC machines and help to enhance the productivity of our organization. The successful candidate will perform work quality checks, monitor machine output each hour and make a few lock deliveries of our products to clients during downtime.
CNC Operator Machinist Job Duties:
• Operate CNC machining equipment.
• Load and unload components and tooling
• Perform rework and repair tasks
• Read drawings, determine critical dimensions/tolerances/diameters, & calculate conversion between decimals and fractions.
• Perform inspection of machined parts
• Use measuring equipment to verify conformance to specifications
• Operate other equipment and/or handheld equipment as required
• Maintain safe operations by adhering to safety procedures and regulations
• Maintains equipment by completing preventive maintenance requirements: troubleshooting malfunctions and calling for repairs
• Maintains continuity among work shifts by documenting and communication actions, irregularities, and continuing needs; by completing production and quality logs.
Requirements:
• High School Diploma/GED
• Ability to frequently lift/push/pull 50-pound objects
• 2-3+ years’ operating CNC equipment
• Willingness to be cross trained across multiple pieces of equipment
• Fluent in English and an effective communicator
• Bilingual (preferred, not required)
• Be able and willing to pass a drug test
• Candidate should be dependable, hardworking with a wonderful attitude!
PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 4 P.M.

THANK YOU to all past, present, and future members of the military for your selfless service to our country!

We are looking for CNC Operators
Shift: 2nd shift (5 pm- 3 am)

Our manufacturing company is looking for an experienced CNC operator who can run a variety of CNC machines and help to enhance the productivity of our organization. The successful candidate will perform work quality checks, monitor machine output each hour and make a few lock deliveries of our products to clients during downtime.
CNC Operator Machinist Job Duties:
• Operate CNC machining equipment.
• Load and unload components and tooling
• Perform rework and repair tasks
• Read drawings, determine critical dimensions/tolerances/diameters, & calculate conversion between decimals and fractions.
• Perform inspection of machined parts
• Use measuring equipment to verify conformance to specifications
• Operate other equipment and/or handheld equipment as required
• Maintain safe operations by adhering to safety procedures and regulations
• Maintains equipment by completing preventive maintenance requirements: troubleshooting malfunctions and calling for repairs
• Maintains continuity among work shifts by documenting and communication actions, irregularities, and continuing needs; by completing production and quality logs.
Requirements:
• High School Diploma/GED
• Ability to frequently lift/push/pull 50-pound objects
• 2-3+ years’ operating CNC equipment
• Willingness to be cross trained across multiple pieces of equipment
• Fluent in English and an effective communicator
• Bilingual (preferred, not required)
• Be able and willing to pass a drug test
• Candidate should be dependable, hardworking with a wonderful attitude!
PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 4 P.M.

We are looking for a Deburrer
Position Type: Full Time
Education Level: High School
Job Shift: Second Shift 5:00pm to 3:00am
Description:
A deburrer smooths edges and sides of manufactured parts, typically metal components, either manually or with a machine. As a deburrer, you inspect and finish equipment parts to ensure they fit properly into the machinery according to the specifications.
Qualifications
Competency Statement(s)
Organized - Possessing the trait of being organized or following a systematic method of performing a task.
Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards.
Accuracy - Ability to perform work accurately and thoroughly.
Safety Awareness - Ability to identify and correct conditions that affect employee safety.
Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace.
Detail Oriented - Ability to pay attention to the minute details of a project or task.
Accountability - Ability to accept responsibility and account for his/her actions.
PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 3 P.M.

Optimuz Manufacturing wishes you and your family a Happy Halloween! 👻💀🎃🎃🎃🎃🎃🎃

We are looking for a Quality Inspector
Position Type: Full Time
Education Level: High School Diploma or Equivalent
Job Shift: Second Shift 5:00pm to 3:00am
Job Category: QA - Quality Control
Description
The QA Inspector performs appropriate in-process and final inspection of machined aerospace parts and Final Assemblies to ensure compliance with engineering and work instruction requirements.
Essential Functions:
Determine and utilize appropriate inspection methods and instruments (Micrometers, height gauges, air gages, radius gages, calipers, CMM, etc.) to complete in-process and final inspection of machined aerospace parts and Major Assemblies, including simple to moderate layouts and setups on a surface plate. Initiate non-conformance records and process parts not meeting requirements. Complete first article inspections to AS9100 and company/contractual requirements.
Continually strive to improve inspection effectiveness and efficiency by identifying and supporting implementation of process improvements.
Qualifications
Competency Statement(s)
Organized - Possessing the trait of being organized or following a systematic method of performing a task.
Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards.
Accuracy - Ability to perform work accurately and thoroughly.
Safety Awareness - Ability to identify and correct conditions that affect employee safety.
Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace.
Detail Oriented - Ability to pay attention to the minute details of a project or task.
Accountability - Ability to accept responsibility and account for his/her actions.
Education: High School Graduate or General Education Degree (GED): Required
Knowledge of blueprint reading and following planning documents, standards and specifications. Strong mathematical skills, CMM experience is helpful
PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 3 P.M.

We are looking for CNC Operator
Our manufacturing company is looking for an experienced CNC operator who can run a variety of CNC machines and help to enhance the productivity of our organization. The successful candidate will perform work quality checks, monitor machine output each hour and make a few lock deliveries of our products to clients during downtime.
CNC Operator Machinist Job Duties:
• Operate CNC machining equipment.
• Load and unload components and tooling
• Perform rework and repair tasks
• Read drawings, determine critical dimensions/tolerances/diameters, & calculate conversion between decimals and fractions.
• Perform inspection of machined parts
• Use measuring equipment to verify conformance to specifications
• Operate other equipment and/or handheld equipment as required
• Maintain safe operations by adhering to safety procedures and regulations
• Maintains equipment by completing preventive maintenance requirements: troubleshooting malfunctions and calling for repairs
• Maintains continuity among work shifts by documenting and communication actions, irregularities, and continuing needs; by completing production and quality logs.
Requirements:
• High School Diploma/GED
• Ability to frequently lift/push/pull 50-pound objects
• 2-3+ years’ operating CNC equipment
• Willingness to be cross trained across multiple pieces of equipment
• Fluent in English and an effective communicator
• Bilingual (preferred, not required)
• Be able and willing to pass a drug test
• Candidate should be dependable, hardworking with a wonderful attitude!

PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 3 P.M.

We are looking for a Deburrer

Position Type: Full Time
Education Level: High School
Job Shift: Second Shift 5:00pm to 3:00am

Description:

A deburrer smooths edges and sides of manufactured parts, typically metal components, either manually or with a machine. As a deburrer, you inspect and finish equipment parts to ensure they fit properly into the machinery according to the specifications.

Qualifications
Competency Statement(s)
Organized - Possessing the trait of being organized or following a systematic method of performing a task.
Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards.
Accuracy - Ability to perform work accurately and thoroughly.
Safety Awareness - Ability to identify and correct conditions that affect employee safety.
Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace.
Detail Oriented - Ability to pay attention to the minute details of a project or task.
Accountability - Ability to accept responsibility and account for his/her actions.

PLEASE APPLY IN PERSON ONLY
Mon-Fri 9 A.M.- 3 P.M.