VW T3 3d printing parts
I make 3d printing parts and gadgets for VW T3/T25
I am moving to another country that is why I am a little bit busy now:) but below you can find my collection of 3d models for
pawelsalbut Repository of 3D printable designs shared by pawelsalbut, designer from Cults, the 3D printing platform.
Nice set for subaru engine and original T3 gearbox. Made by Wojtek Czajkowski - about 1300 eur:)
Gowesty cruise control vs Rostra cruise control.
Price $639,20 $269,00
VSS YES NO + $35
Brackets YES NO + $25
sensors YES NO + $45
arm YES NO + $55
TOTAL $639,20 $429,00
Gowesty is based on Rostra Cruise Control but with all need part to make cruise control operational. This solution is usually used in engines equipped with a manual throttle like original one:).
In fact, you do not need a speed sensor to use this system, because the module has the ability to change the speed signal from wave to square and vice versa. All you need to do is connect an inductive sensor, often found in engines and gearboxes, to the speed signal. In my opinion, the biggest disadvantage of this system is the unoriginal-looking cruise control lever. You can buy the original one with hidden switches from me :) and more.
https://gowesty.com/products/gowesty-cruise-control?variant=41253794807973
https://www.amazon.com/Rostra-250-1223-Universal-Electronic-Control/dp/B007ZCQD9S
Hmmm. I have k**b, I projected bracket and now I have idea to print whole adjustable arm rest:)
ISRI 2.122 armrest k**b. I didn't project the bracket because it is still in production and you can buy it for 10 eur:) for example from Poland:)
https://czescidofoteli.pl/pl/strona-glowna/22-oslona-podlokietnika-isri-22122.html
my 3d models collection
https://cults3d.com/en/users/pawelsalbut/3d-models
armrest k**b in printing (isri 2.122)
I am working on similiar project:) but this one is also good.
VANAGON CUSTOM AIR INTAKES The CBARRdesign.com Custom Air Intakes for the Vanagon are designed to be functional and stylish. There are 4 pieces total to print for each side drivers/passenger (top, middle, bottom and a hex peg to connect the bottom to the middle). You get the SLC files to print both driver and passenger side.....
African Museum in Brussels:)
And full set of engine vents parts.
Parts for engine vent. Upper rubbers in production.
I thought about it but gearbox from porsche 996 is too expensive:)
I thought about it but gearbox from porsche 996 is
too expensive:)
Passeratti k**b - 15 eur. + shipping
This project and more in the link below if you want to print by yourself:)
https://cults3d.com/en/users/pawelsalbut/3d-models
Passeratti k**b:)
I like it;)
And ready:) Chimney for heater.
Chimney bracket. Project in progress:)
Headliner bow cap - 2 eur per piece;)
Headliner bow clip VW251867649
2 eur per piece + shipping
My main product:)
cruise control arm - 50 EUR
speed sensor ver. 2 (very stable) - 30 Eur
brackets for brake and clutch sensors - 20 Eur
2 sensors - 40 eur
The set is good for all tdi's and almost all petrols with electronic gas throtle.
My cruise control arm works also with Rostra system or from Gowesty but is better because looks like original:)
Payment by paypal
I will help you install the cruise control in every step.
If you are during repairing your van and if you want cruise contol think about installing 5 wires from the ECU to the cluster area.
If you want OBD in the front install 6 wires. I have OBD covers in original place of diesel choke - 15 Eur.
https://www.youtube.com/watch?v=EuP5zhBkgTc
Brown levers - 100 eur with shipping in Europe
Nicy:)
Volkswagen SYNCRO 4X4 TD 51KW- Samochód kempingowy Uwaga: Dzień oglądania i odbiór tylko po wcześniejszym umówieniu! Uwaga: Obiekty w różnych lokalizacjach! Radzimy skorzystać z dnia oglądania według własnego uznania. Umów się na to przez [email protected]!
https://cults3d.com/en/3d-model/gadget/locking-pin-for-vw-t3-t25-vanagon
locking pin for VW T3 T25 Vanagon locking pin for VW T3 T25 Vanagon https://www.facebook.com/bogus.engineering
Square lamp adjusters
4 types
for one lamp you need:
first type x 1
second type x 2
third type x 3
fourth type x 6
Set (without screws) for:
1 lamp - 25 eur
2 lamps - 50 Eur
Shipping in europe - about 15 eur
paypal
you can download also 3d project
https://cults3d.com/en/3d-model/gadget/square-lamps-adjusters-for-vw-t3-t25-vanagon
how to install
https://fb.watch/pZW_Ud1_wY/
Square lamp adjusters
4 types
for one lamp you need:
first type x 1
second type x 2
third type x 3
fourth type x 6
Set (without screws) for:
1 lamp - 25 eur
2 lamps - 50 Eur
Shipping in europe - about 15 eur
paypal