Blades by Joe

THE OWEN

Steel: N690 (3.5mm)

Handle: Wood, very dark wood 😂 (Don't know what kind yet), G10 liner (0.6mm), Carbon fiber pins (4mm)

Overall length: 325mm

Weight: 244g

The BIG 1st.
My 1st hidden tang
My 1st hand guard
My 1st antler handle

Steel: N690 (5.5mm)
Handle: Deer antler
Guard: N690
Pins: Stainless steel
Overall length: 455mm
Weight: 813g

My latest project, and also my 1st mosaic pin, very plain but I'm putting it in the book 😂

Steel: N690 (4.5mm)
Handle: Green Kerinite and black G10 with stainless steel pins.
Overall length: 250mm
Weight: 288g

The Groomsmen
Steel: N690 4.5mm
Handles: Jade G10 with black G10 liner and stainless steel pins

Sharpened by Shap Shap Sharpening Services

My 1st Push Dagger. Turned out better than expected 😁

Steel: N690 (5mm)
Handle: G10 with 360 Stainless steel tubing as pins.

It's like half a knife 🤷‍♂️...

Steel: N690 (4mm)

Handle: G10 with stainless steel pins

Overall Length: 213mm

Weight: 88g

Yo... where the zombies at...? 😆

Steel: 5160 (old leafspring) 5mm thick.
Etched & Stonewashed with a mustard patina.

Handle: G10 with 360 stainless steel pinning.

Overall Length: 295mm

Weight: 433g

The Tactical Scalpel, for when you need to surgically remove the bullets before hiding the bodies 🤣

Steel: N690 (5mm)

My latest project.

Steel: N690
Handle: G10 black & red
Pinning: Stainless steel
Over-all Length: 210mm
Blade Length: 100mm
Weight: 204g

This is an AXE-llent recipe.

1 Rusty old axe head.
1 Small piece of steam pipe.
½ meter of Oak 50mm thick
1½ meter leather strip
28 hours of elbow grease
.. and voila!

My wife's B-day prez... a bit late, but awesomeness takes time 🤣

Steel: N690 4.5mm, Etched & Stonewashed
Handle: G10 with stainless steel pins.

All and all a sexy blade for my sexy girl 🥰

The Flying Daggers.... OK maybe I've watched too many Kung-Fu movies 😄

Steel: 5160 Etched and stonewashed
Handle: Paracord wrap

The Tactical Camper
It's a camp knife, but it's tactical 😂
Steel: N690 with scratchy finish
Handle: G10 with stainless steel tube pins

My best work yet 😁👍

Steel: N690 (5mm)
Handle: G10 with stainless steel pinning
Over all length: 298mm
Weight: 409g

The file work on this one took forever... that spine 😂
Also had some issues with epoxy on the handle build, but all and all, she came out beautiful.

Made from an old axe head and a pice of steam pipe, welded together and shaped. Handle is Oak with leather wrap.

Still available.
R1800

Small Hunter
Steel: 440C Stainless Steel 3.8mm
Handle: Stinkwood, G10 liner with brass pinning
Overall Length: 208mm
Weight: 183g

Anthony Kettle hope you enjoy 😉 👍🏻

EDC Knife
Steel: N690 4.5mm
Handle: Black G10 with Toxic green liner and Stainless steel pins.
Overall Length: 195mm
Weight: 170g

Laodsheding Laodsheding Laodsheding 🤦‍♂️

Steel: 440C Stainless Steel
Handle: Stinkhout with brass pins
Sheath: Veg leather and ostrich shin

Loadshedding is fun...

COMPETITION TIME !!!

Guess the weight and win it.

How to enter:
Please enter on original post.
1. Like the page Blades by Joe
2. Tag a friend on the original post
3. Guess the weight on the original post

T&C's
Competition will run until Tuesday 13 Sept 2022
Winner will be announced Wednesday 14 Sept 2022
Only one entry per person
Closest to the correct weight wins
If there is more than one winner, they will go into lucky draw (spin the wheel app)
Winner is responsible for postage via Postnet

Specifications of the knife
Steel: Rebar/Y-bar 3.5mm spine thickness
Handle: G10 with stainless steel pins
Overall Length: 202mm
Weight: ???

Steel: 440C Stainless Steel
Handle: Wild Olive, Blue G10 liner, Brass pinning
Overall Length: 210mm
Weight: 204g