Fronius Africa

The first Fronius Robotic instalation done in Harare zimbabwe,in cooperation with Yaskawa Southern Africa and One Stop Solar Tps400i cmt on a AR2010

The FlexDrive WF 25i - an intermediate drive between the wirefeeder and welding torch.
✔️ Up to 25m between main wirefeeder and welding point
✔️ Weights just 4.4kg
✔️ Suitable for use with both TPS/i and iWave

TRANSTIG
A completely digitised TIG DC power source. With an extremely robust design for a long service life and an exceptionally self-explanatory operating concept. When developing the TransTig 170/210, our focus was entirely on the benefit for our customers. What is needed is absolutely clear: a perfect, stable arc. The higher operating frequency of the inverter technology makes this stability possible. Other benefits of this optimized process technology are maximum efficiency in the duty cycle, the output power and the mains voltage supply. Last but not least, this increased efficiency also makes welding more enjoyable!
Read more: https://www.fronius.com/en/welding-technology/products/manual-welding/tig/transtig/transtig/transtig-210

PMC the optimized pulsed arc
Fronius PMC and its optimized pulse characteristics equal high-quality welds at high speeds. Thanks to the pe*******on and arc length stabilizer, controlling the arc has never been so easy. PMC takes the pulsed arc and its stabilizers to a whole new level. The modified process is characterized by precisely regulated, low-spatter droplet detachment. At the same time, PMC generates a powerful and stable arc which results in perfect control of the weld pool. This enables our users to avoid imperfections. The welding results are always reproducible and stable.

The TransPocket 150/180 devices brings a high degree of flexibility. The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads up to more than 100 m. The operating concept has also become even more intuitive.The TransPocket is available in power categories 150 to 480 A. In addition to the almost indestructible housing and cutting-edge technology, the TransPocket also has functions that simplify work for the user: HotStart, SoftStart and anti-stick provide support at the start of and during the welding process.

Welding fumes “It” makes its way through the mouth and nose and into the smallest branches of the lungs. If you don’t use adequate protection, it spreads across the entire workshop and you breathe in the particles even when you’re not welding.
The good news is that targeted protective measures - first and foremost effective welding fume extraction - can significantly reduce exposure to welding fume.
Learn more in our latest blog article:
>Risk-free welding: Why welding fume extraction is so important<
https://blog.perfectwelding.fronius.com/en/why-welding-fume-extraction-is-so-important/

Schweißrauch: Schweißrauchabsaugung ist elementar Schweißen ohne Risiko: Was ist Schweißrauch, welche Gefahren birgt er und worauf müssen Sie bei einer Schweißrauchabsaugung achten?

TRANSSTEEL 2700C

No matter what the welding task - MIG, TIG and Electrode welding with just one device. Whether a construction site or a workshop, from agricultural enterprises to metalworking companies, for assembly, repair, and maintenance work, the TransSteel Multiprocess series masters the MIG/MAG, TIG, and electrode welding processes to professional levels. Read more: https://www.fronius.com/en/welding-technology/products/manual-welding/migmag/transsteel/transsteel-compact/transsteel-2700-c

Whether it’s a MIG/MAG, TIG, or manual metal arc welding system, the mobile Exento LowVac plays to its strengths during all common welding processes thanks to the flexible extraction arm with flow-optimized extraction hood.
More info ▶️ https://www.fronius.com/en/welding-technology/product-information/exento/exento-extraction-systems-highvac-lowvac

You want to know how to set up Exento HighVac?
Then you have to watch this video: https://youtu.be/uYEwJiGyi3E

HowTo | Set up Exento HighVac More info ▶️ https://www.fronius.com/en/welding-technology/product-information/exento/exento-extraction-systems-highvac-lowvac In combination with the powerf...

Did you know that without adequate protection, welding fumes can cause headaches and nausea, chronic respiratory and further serious diseases?
Within the next 2 weeks we're going to show you how to protect yourself and others against welding fume.

4 TransSteel 4000 Pulse and one iWave AC/DC 300 delivered and welders trained at Superdoll for production in their commercial transportation business division in Dar es Salaam Tanzania.

Fronius GEN24 Plus & BYD Battery-Box the perfect match for your PV storage system 💪🔋

End of October Collective Energy Africa and Fronius hosted a solar training in Kilimani, Nairobi ☀️🛠️ Thanks to all attendees, it was a great training day.

We are looking forward to more training and projects!

COBOT – when manual welding just isn´t enough
when it comes to quality and safety the demands placed on modern-day welding are very high. Welds that can be reproduced at any time and seamless weld data documentation are no longer rare, but rather state of the art. If welding takes place manually, it is often impossible to satisfy these requirements. The solution is automation – even for small and medium-sized enterprises (SMEs).
Read more on our blog: https://blog.perfectwelding.fronius.com/en/cobot-when-manual-welding-just-isnt-enough/

Happy weekend, welders! 👨‍🏭

TIG DynamicWire - The easy way of TIG cold wire welding
Unlike welding with a constant wirefeed, TIG DynamicWire and the dynamic wirefeed adapts to the welder, not the other way around. The simplified handling enables even less-experienced welders to quickly produce high-quality TIG welds.

You think manual TIG welding is difficult to learn? Not with TIG DynamicWire.
Lean back and watch the easiest way of TIG cold wire welding:
https://youtu.be/pgNbK3XbL2M

TIG DynamicWire

DynamicWire - TIG welding made easy

The innovative advantage of Fronius TIG DynamicWire, when compared to a conventional continuous wire feed in cold wire systems, lies in its automatic self-regulation. The power source actively adjusts the wire speed to the welding behavior, torch position, and current conditions, even compensating automatically for component tolerances of up to 30%.

find out more... www.fronius.com/tig-dynamicwire

Universal solution with Multiprocess PRO

Multiprocess capability is important if you are switching between different welding tasks on a day-to-day basis. The new iWave really proves its worth here with sophisticated TIG technology and is ideally suited for manual metal arc welding – even with cellulose electrodes. The Multiprocess PRO option is a real winner, giving the user unlimited access to all MIG/MAG processes in power categories from 300 A. This makes the iWave a multi-talented all-rounder producing outstanding welding results with all welding processes.

TransSteel, ready to weld in three steps.

The intuitive operating concept enables welders to start work straight away – no prior knowledge of the device is required. All the essential welding parameters can be viewed and adjusted on the front panel. The only parameters that have to be selected before welding begins are the gas, wire diameter and material thickness.

The iWave: Top quality – for every weld and every material.
With targeted heat input and improved ignition function, the iWave gives you maximum control over your arc while significantly reducing ignition delays.
For more information, or to check out the iWave online, you can visit our website at: https://www.fronius.com/.../prod.../iwave-tig-welding-system

Simple and cost-effective welding data documentation for TransSteel customers
Load-bearing steel structures, mass-produced products or sensitive parts often have to be traceable down to the final welding parameters. The Easy Documentation option enables TransSteel to record welding data extremely easily - and this for a very attractive price.
How to use Easy Documentation to record welding data: https://youtu.be/4f5zCF3BPHY

HowTo | Use Easy Documentation to record welding data More info ▶️ https://www.fronius.com/en/welding-technology/product-information/easy-documentationWelding data documentation is essential, particularly in ste...

Safe and demonstrable welding - thanks to welding data documentation
From car bodywork to railway bridges, from industrial production plants to oil and gas pipelines: wherever welding is carried out, manufacturers and users expect flawless and demonstrable quality. For most companies, ongoing quality assurance with the help of special monitoring and checking systems is therefore of central importance.
In this blog post, you’ll find out about the role that welding data documentation plays here and why it pays off even for small and medium-sized companies:
https://blog.perfectwelding.fronius.com/en/safe-and-demonstrable-welding-thanks-to-data-management/

Safe and demonstrable welding thanks to data management Impeccable welding data documentation is vital to stable and flawless welds. Read more about it in this blog post!

Webinar announcement for Sub-Sahara Africa🙌

Fronius Tech Support Tools 🛠️
Get all details in our webinar session!
Register here 👉 https://bit.ly/3KL9vPD

Come and experience the Fronius welding machines this week at Nampo Cape Bolt & Engineering Distributors Group BKB Hall 139 & 140.

NAMPO CAPE 2022 - Apps on Google Play

Fronius How-to videos 🎥
You are looking for short videos which help you quickly and easily in the field of photovoltaics?

We have created exactly such videos for you! ☀️
Come to our Youtube playlist 👉 https://bit.ly/3KR83v1

General news: https://bit.ly/3qenyE0

Come to Elctra 2022 to see the Precise, Durable, Intuitive, iWave series, not only can you smash everyday welding tasks. You can also unleash your welding potential and make yourself future-proof. Flexible.

DC & AC system protection with Fronius inverters 💪 🛠️
Get all details in our upcoming Fronius webinar for Sub-Sahara Africa 🙌

Register here - free of charge: https://bit.ly/3pWkeNo

Sustainably thought, sustainably made: we use 100% green electricity in our electrical production. ☀️🌱

More: bit.ly/3QuCtoA

Acting sustainably and taking a conscientious approach to the use of resources and energy is becoming increasingly important in the manufacturing sector. Given that welding technology is a central component of many production processes, we are seeing this trend becoming established here too.
But what kind of factors do we need to consider? What are the important criteria when it comes to selecting the most sustainable welding system possible? And what makes welding processes on the whole more sustainable?
Find out more: https://blog.perfectwelding.fronius.com/en/welding-and-sustainability/

Welding and sustainability – how do we combine the two? What makes a sustainable welding system and how does resource-conserving welding work?

1st day of Power & Electricity World Africa & The Solar Show Africa ☀️

Thanks to all who visited us today! 🙌
You haven't seen our booth yet - come by tomorrow, booth number B53!

We are looking forward to you!

Welding fumes, UV radiation, heat, and electricity: as exciting and varied as the life of a welder is, it is a life of many hazards too – hazards that require the most effective protection possible. Fronius is regarded as a pioneer in the field of welding protection and, with a wide range of innovative products and solutions, is doing all it can to make a decisive contribution to the health and comfort of all welding specialists.

Fronius is coming to the Solar Show☀️

Visit us 👉 23-24 August 2022
Johannesburg, South Africa

Find all information here: https://bit.ly/3SVDFDs

Webinar announcement 💪

How to obtain the best solar yield with Fronius inverters?
We will tell you 👉 18.08.2022 | 11 AM CEST
Register here: https://bit.ly/3QNdbCf

Visit The Fronius Africa stand at Southern Africa’s largest trade show across the mining, electrical, automation, manufacturing, power and transport industries. An exciting showcase of new technologies, ground-breaking machinery and equipment, cutting-edge products, systems and services, and more!

Stand p92
https://tickets.tixsa.co.za/event/electra-mining-africa-2022-visitor-registration

Safe, high-power battery meets MMA/ TIG welding technology
What will the conditions be like when welding on site? Will the grid connection there be sufficient for the power source?
Thanks to AccuPocket, these concerns will now be a thing of the past. With its battery mode, AccuPocket offers you welding process that is completely independent from the grid.
Welding tasks involving up to eight 3.25 mm or up to eighteen 2.5 mm electrodes can be carried out autonomously. A small, compact 2 kVA generator is sufficient for welding applications on a larger scale. And all without any restrictions on welding power or the quality of the arc.