Alpha Timbers Investments

The WOS range is a versatile timber that is more affordable than dry timber. WOS timber planks do not split when nails are put into it and is also ideally used in the informal structure industry. It serves as a good base for timber frames – commonly referred to as beams in the industry.

WOS Timber planks are most commonly used in louvre-style housing. The timber is split into 2 to make it a very affordable building style that is both aesthetically pleasing and practical as one timber piece is overlapped on another allowing water to run off the structure when it rains.

Structural Timber (Kiln Dry (KD) Raw Pine Timber)

This is an oven timber dry process where the moisture of the timber is reduced to the desired content. The timber goes through this drying process so that it can be used in certain building projects that require dry as opposed to wet timber.

The oven drying process allows the sawmill to finger joint short pieces of timber to required lengths that then, in turn, can be used as structural timber.

https://www.manicapost.co.zw/el-nino-boon-for-timber-industry/

El Nino boon for timber industry Hot News From The East

Buy good quality roofing timber at the lowest prices in Zimbabwe.

Suppliers of Structural and Roofing Timber; Wooden Pallets, Flash and Batten Doors.

Flooring

We supply durable, treated hardwood for flooring that is extremely fire, termite and rot resistant.

Get A Quote

Decking

Build decking into your house as part of garden landscaping, to extend living areas, or as an alternative to stone based features such as patios. We supply durable, treated hardwood for decking that is extremely fire, termite and rot resistant.

Mouldings Pine / Saligna

TG: – commonly known as the tongue and groove is used for all household ceiling, partitioning, etc.
Skirting: – timber mould used to conceal the joint between the door and the wall.
Cornice: – it is a type of mould used to conceal the joint between the wall and the ceiling.
Quadrant: – used for concealing joints on partitions.
Coverstrip:- timber mould used for concealing the joints on ceiling boards
Get A Quote

Beams
A beam is a structural element that primarily resists loads applied laterally to the beam's axis. its mode of deflection is primarily by bending.
Size: – 50 x 152

Purlins is a horizontal beam or bar used for structural support in buildings, most commonly in a roof.
Size: – 50mm x 76mm, 50mm x114mm

Fascia boards cap the edge of rafters outside your home and hold the gutters in place, which are essential in roof water drainage.
Size: – 38 x 228

A wall plate is a load-bearing structural member used horizontally and part of a timber framework. The term typically refers to a length of timber bedded on mortar on top of the internal leaf of an external cavity wall.
Size: – 38 x 152A wall plate is a load-bearing structural member used horizontally and part of a timber framework. The term typically refers to a length of timber bedded on mortar on top of the internal leaf of an external cavity wall.
Size: – 38 x 152

A rafter is one of a series of sloped structural members such as wooden beams that extend from the ridge or hip to the wall plate, downslope perimeter or eave, and that are designed to support the roof shingles, roof deck and its associated loads.
Size – 38 x 114

WOS Structural Timber Available at very affordable prices straight from the mill!
Contact us for details.