Glencore Technology

Marcobre's Mina Justa have seen their recovery expectations surpassed since they installed the Jameson Cell.

The Jameson Cell is the best real-world specification for any and all duties within a flotation circuit. And Mina Justa used them in a cleaner scalper duty.

With the Jameson Cell, your operation can get more concentrate from a smaller footprint, and less downtime.

Get a quick and easy idea of what is possible for your operation. Try our free online calculator - https://www.glencoretechnology.com/en/knowledge/calculators/jameson-cell-calculator

Our IsaMill™ technology has over 25 years experience in stirred-milling.

And we have a full technical paper outlining the development history, subsequent commercialisation, scale-up, crossover to coarser grinding and the full circuit concentrator design of the IsaMill™.

Read this paper, and more, by visiting our website https://ow.ly/lRAP50TQnO6

Our ISASMELT™ furnaces can be installed while operating your existing plant!

Some of the challenges we overcame for our client when installing and operating the Pb ISASMELT™ furnace for KAZZINC were:

• Small space for installation in a large, active metallurgical complex
• Increased flexibility when processing future complex feeds
• Integration of slag block casting and handling system
• Large swings in ambient temperature and local weather conditions
• Continue operating existing plant during installation

Despite these, the ISASMELT™ furnace achieved a daily production target in just 5 weeks! Now that’s a flowsheet improvement for the real world.

Learn more about how ISASMELT™ gives you flexible, clean smelting by visiting our website https://ow.ly/gyfU50TQmyU

The beauty of the Jameson Cell is that it creates small bubbles for high particle attachment, to deliver the most concentrate.

It has consistent fine bubble generation with no external equipment or spargers. The intense mixing with small bubbles achieves rapid flotation without mechanical agitation, and high throughput in a small footprint.

In short, the Jameson Cell is an efficient, low maintenance, high intensity flotation technology for new plants or low cost plant expansions.

Check out of quick and easy online calculator to see what's possible for your operation and contact us today https://www.glencoretechnology.com/en/knowledge/calculators/jameson-cell-calculator

We have a new Jameson Concentrator webinar up on YouTube!

This webinar will address the differences between the conventional and Jameson Concentrator design approaches with a focus on the application of Jameson Cells in rougher / scavenger duty with coarser feed. Furthermore, it will show the key findings of a trade-off study between a conventional circuit and a Jameson Concentrator supported by other case studies and test results.

It is possible to significantly cut OPEX and CAPEX of new flotation plants with the Jameson Concentrator.

Watch the full webinar now on our YouTube channel:

English: https://ow.ly/W8KH50TJoIV
Spanish: https://ow.ly/XPnf50TJoIP
Russian: https://ow.ly/JvZN50TJoIU

‘Self-fund’ your flowsheet improvements in 3 stages and maximise your grade and recovery… At Mill Operators Conference 2024, we are hosting three lunch-and-learns to show you how a staged implementation can create incremental improvements when your flowsheet hits sulphides. Each improvement can produce revenue gains that fund the next improvement.

So, bring your lunch and meet us at Glencore Technology Booth # 78+80 where we will present a new topic each day:

Day 1: Boost Grade and Recovery with Jameson Cell | 12:30pm – 12:45pm

Day 2: Liberate More Concentrate with IsaMill™ | 12:45pm – 1:00pm

Day 3: Treat Difficult Feeds Better with Albion Process™ | 10:30am – 10:45am

Click here for the full lunch-and-learn schedule and to claim your free info-pack! https://ow.ly/N8GM50TGmYq

Join our upcoming "Flotation: Comparing Available Technologies" webinar to gain expert insights on comparable technologies.

We will review 9 separate flotation technologies in factors like energy, capital cost, performance in duties and more.

This is a webinar not to be missed! Register today to secure your spot. For time zone and language optimisation, we are offering multiple sessions:

Africa/Eurasia/Oceania | Wednesday 16th October - 4pm AEST
Presented in English by Carter Lawrence - Register here! https://ow.ly/KAxN50TrrQt

North America | Thursday 17th October - 1pm PDT
Presented in English by Carter Lawrence - Register here! https://ow.ly/kbke50TrrQv

América Latina | martes 22 de octubre - 5pm CLT
Presentado i español por Eduardo Morin - ¡Regístrese aquí! https://ow.ly/hbsN50TrrQs

Because ISASMELT™ was developed by engineers and operators working to make sure their operation was as efficient and effective as possible, we’ve refined and developed process simulations and calculations to account for real-world conditions.

This webinar gives you access to those 40 years of ISASMELT™, in which Glencore Technology has approached each individual project from the perspective of process, mechanics and operation to ensure its success.

In this latest Masterclass, you will get a first-hand look into our approach to process simulations and calculations- what sets it apart, what makes it effective, and how you can benefit from them in your own operation.

https://youtu.be/93mSuPbE-Y8?si=35I6KT7T-IFcnJwa

Hudbay Minerals Inc. team at Stall were chasing energy-savings in secondary grinding and Glencore Technology was exploring how IsaMillᵀᴹ might deliver.

So, the two collaborated and what they demonstrated was powerful. A greater than 50% reduction! Their test results beat expectations and changed the rules -



https://ow.ly/iYGl50TvSe9

We're putting Jameson Cell, Conventional Cell, Column Cell, NovaCell, Direct Flotation Reactor, Reflux Flotation Cell, StackCell and Concorde Cell under the spotlight.

But which one would be the recommended choice for a particular duty, budget, complexity and priority?

Register to our FREE webinar “Flotation: Comparing Available Technologies” and get all the insights you need to choose the technology that best suits your flotation needs.

For time zone and language optimisation, we are offering multiple sessions:

Africa/Eurasia/Oceania | Wednesday 16th October - 4pm AEST
Presented in English by Carter Lawrence - Register here! https://ow.ly/KAxN50TrrQt

North America | Thursday 17th October - 1pm PDT
Presented in English by Carter Lawrence - Register here! https://ow.ly/kbke50TrrQv

América Latina | martes 22 de octubre - 5pm CLT
Presentado i español por Eduardo Morin - ¡Regístrese aquí! https://ow.ly/hbsN50TrrQs

Traditional concentrator design involves the use of large mechanical cells. But with increasing ESG requirements, there's pressure for organisations to reduce emissions.

Our technical paper, "Energy Savings and Carbon Footprint Reduction - Jameson Vs Conventional Copper Concentrator", gives a comparative case study between the Jameson Concentrator and a conventional copper concentrator.

The results show that the Jameson Concentrator save power consumption and footprint.

Read the full technical paper, and many more, by visiting our website https://ow.ly/yAXT50TqCbl

Junior mining companies often face CAPEX constraints. This makes it difficult to finance a complete processing plant.

Glencore Technology offers modular and flexible technologies that allow you to improve your flowsheet in stages.

This webinar will show you some of our technologies and the possibilities and advantages of a staged development over conventional plant construction.

You will see real life test work examples with the economic results that came from processing through whole ore body with pour technologies.

Watch the full webinar on YouTube now and ask any questions you might have in the comment section below - https://youtu.be/TryKCwuCcik

Register for our FREE webinar, “Flotation: Comparing Available Technologies” and get a rare comparison of available flotation technologies.

Join one of our expert metallurgists as they examine Jameson Cell, Conventional Cells, Column Cells, NovaCell, Direct Flotation Reactor, Reflux Flotation Cell, StackCell and Concorde Cells.

Gain a better understanding of the different options and where they might best play a role in your flotation needs.

For time zone and language optimisation, we are offering multiple sessions:

Africa/Eurasia/Oceania | Wednesday 16th October - 4pm AEST
Presented in English by Carter Lawrence - Register here! https://ow.ly/1ce650TrrQw

North America | Thursday 17th October - 1pm PDT
Presented in English by Carter Lawrence - Register here! https://ow.ly/RfOg50TrrQx

América Latina | martes 22 de octubre - 5pm CLT
Presentado i español por Eduardo Morin - ¡Regístrese aquí! https://ow.ly/j2CR50TrrQy

Last call to register for our webinar, "How IsaMill™ Can Cut Your Secondary Grinding Energy in Half".

This is your last chance to watch Ion Gurnett discuss the efficiency gains that can be made when using an IsaMill™ upfront in your circuit, and exactly why Glencore Technology is moving into Coarse Grinding trials.

There will be a Q&A session available and early access to the webinar recording. This final webinar is happening today at 1pm Vancouver time. Click the link to register now! https://ow.ly/RSha50TixIe

Estaremos na , em Belo Horizonte, na próxima semana!

Os visitantes do Pavilhão Australiano, localizado na rua Calcita, poderão se encontrar com profissionais metalúrgicos da Glencore Technology, além de clientes no Brasil que já trabalham com nossas tecnologias.

Os visitantes do estande da Glencore Technology terão acesso exclusivo a apresentações de 10 minutos sobre a célula Jameson e o caso da Caraíba (Ero Copper).

Registre-se aqui, ara fazer download do pacote informativo COMPLETO e assistir a uma das sessões no estande: https://lnkd.in/gfDzy8Aa