CBWS PTY LTD.

CARL’S BUILD & WELD SOLUTIONS PTY.LTD

Photos from Piping Engineering World's post 25/09/2023
Photos from Piping Engineering World's post 07/09/2023

Pipe Alignment Basics

31/08/2023
14/08/2023

Modern day heroes

Photos from Piping Engineering World's post 09/08/2023

Important Pipe Fabrication Basics ⬇️

Photos from Piping Engineering World's post 08/08/2023

Types of Flanges used in Piping System

Photos from Piping/NDT/Welding.com.ph's post 07/08/2023

Weld joint terminologies

Photos from CBWS PTY LTD.'s post 18/12/2022

Another milestone for CBWS PTY LTD. has been achieved after a successful installations of refrigeration piping and structural supports for the completion of a cooling facility in Truganina. A cold storage warehouse aims to maintain the produce (usually food) at an optimum temperature, to prevent spoiling and to extend its life. By contrast, a freezer warehouse must keep the product at a constant temperature to ensure there is no risk of damage or alteration to its integrity.

Refrigeration and freezing are two of the most common forms of food preservation used today. The ammonia is the chemical that is used to absorb the heat from one area and bring it to another area to dissipate. An ammonia refrigeration system, like all v***r-compression refrigeration systems, are made up of several components that work together.

There are four fundamental components of how industrial refrigeration works. That is not the full picture, but the basic idea runs into this equipment’s to help execute the cooling job. Piping runs from the compressor to the condenser and pass through the expansion device down to the ev***rator and the low pressure v***r is pump back to the compressor.

Project has been completed within the timeframe and through the precise and coordinated planning between Subcontractors FJR PIPES, DFZ outsourcing..

JOB WELL DONE!

08/02/2022

Lol 😁😂

04/02/2022

🙂😁🙂

Photos from GBC Weld Works Pty.Ltd's post 10/01/2022

Another shutdown project has been finished. Kudos to the team for a job well done 👌👌
Spot on welding and fabrication job with quality, quantity and safety is the priority.

Photos from GBC Weld Works Pty.Ltd's post 15/12/2021

Completion of 2 units ev***rator support jig and laying down of pipeworks and structural pathwalk. In partnership with gbcweldworksptyltd, a solution based and well organized time management team to hit the target schedule.

13/12/2021

Hard life 🙂🙂🙂

Photos from GBC Weld Works Pty.Ltd's post 06/12/2021

Inconel superheater tubes for boiler

Photos from CBWS PTY LTD.'s post 06/12/2021

Installation of bypass line conveying a liquid ammonia which is used as a refrigerant for its newly installed ev***rator, at Wodonga Rendering Plant. Cryogenic pipes were fabricated and installed succesfully.

✨An Industrial Ammonia Refrigeration System is used for large-scale operations such as food & beverage manufacturing facilities and cold storage warehouses. It plays an essential role on industrial applications/operations as it ensures the temperature conditions (to remain on its optimal levels) for the facility’s products and/or processes by eliminating heat rather than, as commonly believed, creating cold.✨





Specialize in pressure pipes, structural steel and tubes welding, fabrication and installation.

27/11/2021

Ctto

Real work about to begin for Woodside 27/11/2021

https://www.facebook.com/140363106133929/posts/1887351978101691/

Real work about to begin for Woodside Woodside Petroleum has got its huge Scarborough gas project across the line, but there are still many hurdles ahead to get the development into construction while facing environmental pressure.

Want your business to be the top-listed Equipment Service in Melbourne?
Click here to claim your Sponsored Listing.

Website

Address


Melbourne, VIC

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Other Engineering Services in Melbourne (show all)
Automation Systems & Controls Automation Systems & Controls
11 Havelock Road
Melbourne, 3153

Leaders in Automation Engineering, Products & Systems, our aim is to provide customers with a competitive marketplace advantage, along with our applied knowledge & value-added engi...

Bayly Group - Product and Industrial Designers Bayly Group - Product and Industrial Designers
2/242 Lower Heidelberg Road
Melbourne, 3079

Product Designers and Technology Developers

JST Trailers JST Trailers
5 Airlie Avenue
Melbourne, 3175

leading box trailer manufacturers

Hardman Bros. Engineering Hardman Bros. Engineering
385-393 Lower Dandenong Road
Melbourne, 3172

Gear Cutting, CNC Machining, Broaching, Wirecutting & Grinding

RM Aluminium & Fasteners RM Aluminium & Fasteners
27 Barrie Road, Tullamarine
Melbourne, 3043

RM Aluminium & Fasteners is located in Melbourne Australia with local inventory to supply a variety

Clean TeQ Water Clean TeQ Water
12/21 Howleys Road
Melbourne, 3168

Clean TeQ Water (ASX:CNQ) is one of the world's most innovative water treatment companies. We provide a wide range of water treatment solutions to customers around the world.

Hamilton Precision Engineering Hamilton Precision Engineering
41 Mc Intosh Street Airport West
Melbourne, 3042

Engineering services. CNC machinists, Precision is our specialty

Onyx Precision Engineering Onyx Precision Engineering
Hillside
Melbourne, 3037

Experienced Machinist offering engineering services including, small mill and lathe work, fabricatio

Peninsula Noise Testing Peninsula Noise Testing
11 Apsley Place, Seaford
Melbourne, 3198

Noise testing for motor vehicles , race cars , motorcycles , industrial machinery and music and motor racing venues.

KH Equipment KH Equipment
Melbourne

Engineering & Manufacturing facility in Hallam Victoria. KH Equipment is the manufacturer of Austart Air Starters and Irving Vincent Motorcycles. The facility operates 20 CNC Mac...

ZHM Engineering Services ZHM Engineering Services
Melbourne
Melbourne

100% AUSTRALIAN OWNED Manufacturing & Procurement company

Proform Industrial Proform Industrial
56 Glenbarry Road Campbellfield
Melbourne, 3630

Precision Cutting and Forming Solution. Melbourne-based, Servicing Aus-wide.