Thunderfab

Come down and see us at this years 4WD show. We will be at site 79!!
Show specials and products on display along with a couple of recent canopy builds we have completed on a N70 Hilux and a Silverado 1500 Trailboss.

-Dometic/Bushman fridge enclosure
-Drawer fridge enclosures
-Canopy Drawers
-Canopy Shelving
-Weber mounts

Weber BBQ Mounting Brackets - Designed to secure your Baby Q or Weber Q BBQ in a slide out tray. - Proudly made in WA, manufactured in 316 marine grade stainless steel. - Includes 1x pair of brackets, 4x Stainless bolts, washers, nuts. 2 Sizes available - Baby Q 1000/1200 - Weber Q 2000/2200

87RV Custom Caravans

.
Bushwakka Builds Dirtylifewheelsaust Helinox ARB 4x4 Accessories REDARC Electronics Dometic BioChef

Never judge a book by its cover. This canopy has received a huge improvement after our custom interior fit out. A special strut channel frame was build in order to raise the floor, allowing enough space for the custom drawers to be installed. 2 big drawers with a flat top enclosure and a set of aluminium tracks on one side and a single drawers mounted right next to one of our upright fridge enclosures on the other. Also, don't forget to look up! A massive shelf unit helps to maximize the vertical space without taking too much room.

The wait is over! The 30L drawer fridge is now protected by our new enclosure!

Available with a flat top or tray top, this fridge enclosure comes with a two stage table system allowing the fridge to be opened without the necessity of cleaning the table!

A few photos from our last year's giveaway winner! Rob Wells showing off his new aluminium shelf installed on his canopy.

Enjoy, mate!

When our standard 485mm drawer is not enough, a big 675mm W x 1010mm L x 280mm H will certainly do the job!

For this special project we came up with a new, freshly designed, stainless steel handle that allows you to unlock and open the drawer with only one hand.

There you have it! More spacious than our apprentice's apartment, this interior offers you all the gear you need for a lap or two around Australia.

- 130L Bushman Fridge;
- Shelf;
- 3 drawers;
- Electric panel;
- Air compressor;
- Heaps of storage space.

What else could you ask for?!

Bushman Fridges REDARC Electronics

And it is finally completed (at least for now)!

This 79 series has got basically all the gear Thunderfab has to offer:

- Full aluminium canopy;
- Water tank;
- Boat rack;
- Ladder;
- Double step wheel holder and more!

If you don't think this is one of our best builds so far, wait until the interior of this rig is revealed and I am pretty sure you are going to change your mind!

.toyotaoverlanders

Custom build, this toolbox features an unique design. The latest review on our doors system provides a cleaner look and better weather sealing as well as a wider opening which helps when loading and unloading your gear!

Two main storage compartments, fully protected from the elements, are secured in place by two extra strong lockers in each door. A big tray on top with a cut out to fit jerrycans, wood for a camping fire or anything that you don't want inside your toolbox. All this space and convenience under 70kg!

Light weight, strong, practical and good looking; this is Thunderfab.

Dirty exterior, spotless interior! We spend extra time on every build, paying extra attention to all door's seals, making sure they are not only dustproof but also waterproof!
This set up has everything you can imagine and a bit more. A medium drawer shares the canopy with a large sized one which, combined to the shelf unit mounted to the roof, delivers plenty of storage space without taking too much room inside the canopy. A MSA Fridge enclosure and an electric panel done by ORE complete this astonishing build.

All-New Isuzu D-Max

Dirty? Yes! Our canopies are made for the adventure and can handle everything Aussie land has to offer!

All-New Isuzu D-Max

Constructed from 2.5mm, 5005 grade aluminium, CNC cut and folded design, this storage unit fits perfectly in the back of this classic GU Patrol.
-1 x Fridge slide
-1 x Pull out table below fridge slide
-2 x Storage drawers
-1 x Pull out table under the top storage drawer
-Top tray with anchor points
-125kg locking drawer slides
-Powder coated in Sable Bass

Total weight under 75kgs




EvaKool

Here, some more pics of this project, showing the internal space fitted with a slide out tray. Super heavy-duty sliders have been installed in order to hold a BBQ grill.

Another build complete! That is the smallest 87RV you are going to see out there, but it doesn't mean it lacks in space and comfort. The same way as its bigger brothers, 87-003 is equipped with a toolbox designed, engineered and built by us. Light weight, strong, spacious and beautiful, this toolbox will keep all your gear safe and dry during your trip!

Custom build, this slide out BBQ tray is everything you need to safely storage your barbecue grill. The high graded aluminum construction keeps the light weight without forgetting the structural strength and the heavy-duty sliders, with locking system, do the job keeping the whole unit steady when fully extended.
This custom set is completed by two deep storage compartments located behind the BBQ tray, being the perfect spot to organize your cutlery, spices and much more!

The complete set up of one of our most expected builds of last year!
# #
Makocraft Boats Bushman Fridges ARB 4x4 Accessories SAFIERY

Hugging the Coast

the Coast

ARB 4x4 Accessories

Makocraft Boats

Dometic

Dometic

We have just finished up our most recent build on a 2022 Next Gen Ford Ranger XLT.
For the new Ranger, we designed a whole new canopy with revisions to the length, width and door angle height to better suit the vehicle.
Key features to this build include -
- 1850mm wide x 1650mm long x 890mm high, all aluminium, chassis mounted, 2 door canopy.
- Radar, reverse sensors and rear facing camera relocation kits supplied and all working perfectly thanks to Flux3D
- Flush mounted stainless steel fuel filler utilizing the factory fuel filler plumbing
- Auxiliary 120ltr poly fuel tank mounted under the canopy to be utilized for additional fuel capacity for those longer trips.

This build also features our standard dual cab package options such as -
- 25mm Channel on roof for mounting of roof racks, roof top tents, boat loaders etc
- Water & dust proof, sealed front and rear toolboxes with whale tail locks
- LED taillights with required load resistors for correct operation
- Tapered flared mud guards built from 5005 grade, 2.5mm aluminium
- Finished in powder coat inside and out

Total weight for this whole package as pictured is 245kg.

If you have a Next Gen Ranger and are contemplating having a canopy built, make sure you give us a shout.



.247