Joe Toth Composites

Are latest newest release adding to the family! Thank you Jeff for coming over to let us play with your beautiful 996.2 C2. We now offer a 3 pc front splitter. We are offering a 10 % discount on the first 5 orders in exchange for pictures of it installed. PM for details.

Thank you Tim from the Netherlands for sending pictures of his beautiful C4S after installing the 3 pc splitter and sideskirts and allowing me to highlight his car on my page. Absolutely stunning 😍

Thank you David for sending me pictures and allowing me to highlight his car on my page of his stunning 2007 Boxster with his full kit of front splitter, sideskirts and ducktail. Now all I need to do is buy bumper to complete the kit with a rear diffuser as soon as I finish developing the 996.2 C2 3 pc front splitter which I'm hoping to release in the near future.

What a shot ! Thank you Peter for sending me this photo who purchased the 2 pc splitter back in 2016 and says it's still going strong. This beautiful 996 GT3 is catching some air in Plantzgarten on the Nurburgring race track.

Photo credit :

It is our privilege to sponsor Eric Sutton of RSpeed Motorsports in his beautiful 996 Turbo and proud he's using our areo parts.

Eric will be competing in the Super Lap Battle 2024 on March 9-10.. The Super Lap Battle, part of the Global Time Attack series, is a premier time attack race held at the Circuit of The Americas in Austin Texas showcasing drivers competing to achieve the fastest single lap times.

We wish Eric and his team best of luck in this event!

Thank you Evan Martin for sending me some photos of his 986.1 Boxster once he installed the ducktail, diffuser and 3 pc front splitter who said it was all easy to install. It looks great!!

Another happy customer sent me pictures today of his 06 987.1 Cayman with our 3 pc front splitter who said he loves it! It inspires me to to get such positive feedback that keeps me a young 73 yrs old who is passionate of what i'm doing.. Thank you Jason Parker

You asked for black on black ? Here it is ! One of our customers drove down from Seattle this morning and we installed his 986.1 3 pc front splitter and he loves it. Another happy customer and I'm grateful he brought his car down.

Another happy customer who drove 787 km , close to 500 miles through the winter snow to pick up his splitter. We sort of did just a mock up fit as he didn't want to drive it back home through the bad weather winter conditions so don't mind the dirty car as he drove 8 hrs through mud and snow to get here. We will be offering free shipping until Feb 5 closing time. Send me private message if interested.

UPDATE! We have successfully test fitted our new 986.1 Boxster 3 pc sectional and is now available to order. We decided to offer free shipping within North America until Feb 5/24 until closing. For our international customers we will pay a half of your shipping cost. If interested please send me a private message to work out the details.

We are introducing a new sectional for the 986.1 Boxster! I'm now looking for a donor car to do the final test fit. Seeing that shipping a one pc splitter can be very costly I decided to make the 3 pc sectional. The 3 pc will be available as soon as I do a final test fit for 385 USD

Just a little update on our Lil Red as the last update was the cage being put in well since then my wife Deanna completed 3 successful novices races and 1 senior race each time doing her personal best.. Thanks to Turn3 Autosport for helping us get all the alignment work done and Tarett Engineering Competition Suspension Components for providing the sway bars, drop links , rear control arms. So much work has gone into making her faster and easier to handle that Deanna has had to keep relearning to drive the car but it's been worth every step as we are having the time of our lives.

Lil Red is getting ready for track season! Our 1600 DIY roll cage we've been working on for a few weeks now started off with bending PVC to get the bends and angles right. I got most of it all tacked in and tomorrow we weld it all together in hopes of being ready race ready on May 27.

Cayman 987.1 owners! We were contacted by a customer asking if we’d be interested in developing a new flat bottom for his Cayman race car. With the feed back/ input we received from him we are happy to release our new flat bottom splitter. It is a sectional splitter for 2 reasons, 1 if a portion/section gets damaged you don’t need to buy a whole new splitter and 2. With the rising cost of shipping it makes it much more affordable in a smaller pkg. As you can see in the pictures the splitter blade is removeable and replaceable if damage occurs. There is no modifications required to the car as it mounts to factory locations. The flat bottom extends all the way back to the factory belly pan on the Caymans with hardware that is included.

Before and after pictures a customer sent to me after getting the parts painted and installed. Such a beauty !

With Canadian Thanksgiving just around the corner we are giving thanks to all our customers around the world! If not for you all inspiring me to create and design areo dynamics for various models my passion couldn't possibly happen without your support. I'd like to offer a 10 % discount on my 986.1 , 987.1 and 987.2 Rear Diffusers.. Happy Thanksgiving to you all!

It’s a wrap !! Just completed wrapping our 986 Boxster track car !

Project track car coming along nicely! We just finished installing a light weight carbon fibre dash with updated gauges eliminating another 12 lbs. A new sparco removable steering wheel was installed along with seat glider so my short legs can now reach the peddles. Next is a light weight composite hard top and trunk lid. Hoping to be ready for track season come May.

Our work in progress track car is coming along. Managed to complete the trunk lid and replace 34 lbs of trunk lid and factory spoiler mechanism with 6lbs fiberglass trunk lid. The car is now under 2200 lbs. Next up is replacing the steel hood and top with fiberglass to reach 2100. Zoom zoom! 

https://youtu.be/tSFhh3jWFI8

How to REMOVE the Joe Toth Ducktail/Spoiler | Porsche Boxster 986 This video shows you how to remove the Joe Toth Ducktail from your Porsche Boxster 986 so you can get to the bolts required to remove your rear bumper.If you...

997.2 GT3 front lip

Thanks for coming by yesterday! Glad you like it.

Here you have a step by step guide to install the 986.1 Boxster Rear Diffuser. I used a 1/8 drill bit.

https://www.youtube.com/watch?v=8H0TvUNSg2o

IMG 2793 986.1 Boxster Rear diffuser installation guide

Hello everyone! We are very excited to introduce are latest piece for the 986.1 Boxster. The Diffuser is complete and now ready to manufacture!! We are offering free shipping within North America for the first 5 orders placed. Please msg me for details at Joe Toth Composites. I’ll also be posting a installation video on my FB page.